Compaq Proliant ML310 Server (No Hard Disks Found)
Dear users, When installing SuSE Enterprise Server 8 on a Compaq Proliant ML310 server, we get a error "Hard disk not found" I assume its because a Smart Array Driver is required. Please may you advise where I can download the Compaq Smart Array 641 boot-time loadable device driver? Do I press ALT then insert the floppy disk during the install process? I have created a driver disk using rawwrite, press ALT at installation, insert disk, but SuSE just does nothing... Does not detect any controller. Any help is much appreciated. Thanks Fareed
The fact that ive tried to unsubscribe from this fuckin list 4 times in the past month but I continue to get bullshit from it.
On Mon, 2004-08-30 at 11:11 -0400, Charles Berman wrote:
The fact that ive tried to unsubscribe from this fuckin list 4 times in the past month but I continue to get bullshit from it.
What process did you follow? I unsubscribed and resubscribed yesterday to change my email address and it worked perfectly. I just followed the instructions and it worked. -- Andre Truter | Software Engineer | Registered Linux user #185282 ICQ #40935899 | AIM: trusoftzaf | http://www.trusoft.co.za ~ "Oh Bother!" said the Borg, "We assimilated the Pooh!" ~ Disclaimer and Confidentiality Warning This message is intended for the addressee only. If you are not the intended recipient of this message, you are notified that any distribution, use of or copying of this communication is strictly prohibited. If you have received the communication in error, please notify the sender immediately. The views and opinions expressed in this message are those of the individual sender of this message and do not necessarily represent the views and opinions of ATIO. Consequently, ATIO does not accept responsibility for such views and opinions and this message should not be read as representing the views and opinions of ATIO without subsequent written confirmation. Each page attached hereto must also be read in conjunction with this disclaimer.
Charles wrote regarding '[SLE] YA KNOW WHAT SUCKS MOST OF ALL?' on Mon, Aug 30 at 10:10:
The fact that ive tried to unsubscribe from this fuckin list 4 times in the past month but I continue to get bullshit from it.
Every "bullshit" you get from this list has a header in it - "list-unsubscribe:". In your mailer, click on whatever you have to do to "view all headers". Copy the contents of that header into the "To:" line of a new message, and type whatever curse words you want into the subject and body. Moments later, you'll be free at last, able to enjoy life without a care. HTH. --Danny, cc'ing the list so anyone else tired of this f'in BS can also get out now
On Monday 30 August 2004 17:49, Danny Sauer wrote:
Every "bullshit" you get from this list has a header in it - "list-unsubscribe:". In your mailer, click on whatever you have to do to "view all headers".
And please let me know how to do that: X-Mailer: Microsoft Outlook, Build 10.0.2616 I have yet to figure out how to get Outlook to let me see complete headers. -- Kind regards Hans du Plooy Newington Consulting Services hansdp at newingtoncs dot co dot za
On Mon, 2004-08-30 at 18:01 +0200, Hans du Plooy wrote:
On Monday 30 August 2004 17:49, Danny Sauer wrote:
Every "bullshit" you get from this list has a header in it - "list-unsubscribe:". In your mailer, click on whatever you have to do to "view all headers".
And please let me know how to do that:
X-Mailer: Microsoft Outlook, Build 10.0.2616
I have yet to figure out how to get Outlook to let me see complete headers.
Ummm.. Call Microsoft support? Or use a different (decent) mail client? -- Andre Truter | Software Engineer | Registered Linux user #185282 ICQ #40935899 | AIM: trusoftzaf | http://www.trusoft.co.za ~ "Oh Bother!" said the Borg, "We assimilated the Pooh!" ~ Disclaimer and Confidentiality Warning This message is intended for the addressee only. If you are not the intended recipient of this message, you are notified that any distribution, use of or copying of this communication is strictly prohibited. If you have received the communication in error, please notify the sender immediately. The views and opinions expressed in this message are those of the individual sender of this message and do not necessarily represent the views and opinions of ATIO. Consequently, ATIO does not accept responsibility for such views and opinions and this message should not be read as representing the views and opinions of ATIO without subsequent written confirmation. Each page attached hereto must also be read in conjunction with this disclaimer.
On Monday 30 August 2004 18:01, Andre Truter wrote:
X-Mailer: Microsoft Outlook, Build 10.0.2616
I have yet to figure out how to get Outlook to let me see complete headers.
Ummm.. Call Microsoft support?
Or use a different (decent) mail client?
That was the original poster's header I copied. Mine says: User-Agent: KMail/1.6.2 But most of our clients use Outlook. Troubleshooting mail problems would be so much easier if I can see the headers. -- Kind regards Hans du Plooy Newington Consulting Services hansdp at newingtoncs dot co dot za
On Mon, 2004-08-30 at 18:20 +0200, Hans du Plooy wrote:
On Monday 30 August 2004 18:01, Andre Truter wrote:
X-Mailer: Microsoft Outlook, Build 10.0.2616
I have yet to figure out how to get Outlook to let me see complete headers.
Ummm.. Call Microsoft support?
Or use a different (decent) mail client?
That was the original poster's header I copied. Mine says:
User-Agent: KMail/1.6.2
But most of our clients use Outlook. Troubleshooting mail problems would be so much easier if I can see the headers.
Oops, I did not notice which client you are using, but your mail was just flame-bait that I could not resist.. :-) Anyway, it would be much better if people would use decent mail clients. I seem to remember though that Outlook does (did) have a way to view the mail in raw format, but you have to go through many clicks. That was way back in the dark ages when I last had to use Outlook. Maybe another way is to save the mail as a text file? Dunno if that will work though, just an idea. -- Andre Truter | Software Engineer | Registered Linux user #185282 ICQ #40935899 | AIM: trusoftzaf | http://www.trusoft.co.za ~ "Oh Bother!" said the Borg, "We assimilated the Pooh!" ~ Disclaimer and Confidentiality Warning This message is intended for the addressee only. If you are not the intended recipient of this message, you are notified that any distribution, use of or copying of this communication is strictly prohibited. If you have received the communication in error, please notify the sender immediately. The views and opinions expressed in this message are those of the individual sender of this message and do not necessarily represent the views and opinions of ATIO. Consequently, ATIO does not accept responsibility for such views and opinions and this message should not be read as representing the views and opinions of ATIO without subsequent written confirmation. Each page attached hereto must also be read in conjunction with this disclaimer.
Andre wrote regarding 'Re: [SLE] YA KNOW WHAT SUCKS MOST OF ALL?' on Mon, Aug 30 at 11:26: [...]
Anyway, it would be much better if people would use decent mail clients. I seem to remember though that Outlook does (did) have a way to view the mail in raw format, but you have to go through many clicks. That was way back in the dark ages when I last had to use Outlook.
You're probably thinking of the "view source" option that Outlook has (had?). Fortunately, our "corporate email" solution is IMAP read via either Thunderbird or whatever other reader the user wants to use (so long as the admin approves, and I'm pretty flexible). As a side effect of this enilghtened (so I like to believe) policy, I don't know how to view full headers in modern Outlook. I'm a happier admin for it, though. :) --Danny, suggesting "forward as attachment" for future debugging needs...
On Monday 30 August 2004 18:20, Hans du Plooy wrote:
User-Agent: KMail/1.6.2
But most of our clients use Outlook. Troubleshooting mail problems would be so much easier if I can see the headers.
That's easy.. Open the message. Select view > options . The headers are at the bottom of the box. Mike -- Powered by SuSE 9.1 Kernel 2.6.4 KDE 3.2.1 Kmail 1.6.2 For SuSE Mondo/Mindi backup support go to http://www.mikenjane.net/~mike 6:42pm up 5 days 1:05, 4 users, load average: 1.13, 1.12, 1.11
.................eh eh eh..................good said, Andre. Hans, try to right-click on message's title. silverpilot Alle 18:01, lunedì 30 agosto 2004, Andre Truter ha scritto:
On Mon, 2004-08-30 at 18:01 +0200, Hans du Plooy wrote:
On Monday 30 August 2004 17:49, Danny Sauer wrote:
Every "bullshit" you get from this list has a header in it - "list-unsubscribe:". In your mailer, click on whatever you have to do to "view all headers".
And please let me know how to do that:
X-Mailer: Microsoft Outlook, Build 10.0.2616
I have yet to figure out how to get Outlook to let me see complete headers.
Ummm.. Call Microsoft support?
Or use a different (decent) mail client?
-- Andre Truter | Software Engineer | Registered Linux user #185282 ICQ #40935899 | AIM: trusoftzaf | http://www.trusoft.co.za
~ "Oh Bother!" said the Borg, "We assimilated the Pooh!" ~
Disclaimer and Confidentiality Warning
This message is intended for the addressee only. If you are not the intended recipient of this message, you are notified that any distribution, use of or copying of this communication is strictly prohibited. If you have received the communication in error, please notify the sender immediately. The views and opinions expressed in this message are those of the individual sender of this message and do not necessarily represent the views and opinions of ATIO. Consequently, ATIO does not accept responsibility for such views and opinions and this message should not be read as representing the views and opinions of ATIO without subsequent written confirmation. Each page attached hereto must also be read in conjunction with this disclaimer.
-- "Silence is the element in which great things fashion themselves "
On Monday 30 August 2004 11:11 am, Charles Berman wrote:
The fact that ive tried to unsubscribe from this fuckin list 4 times in the past month but I continue to get bullshit from it.
You mean BS like the unprofessional crap you just spewed??? Get a clue if you can't read the bottom of every email for the unsubscribe info. And being totally clueless, you probably changed your email address and are trying to unsub with a different address than you originally subscribed with. Someone please get rid of this screwball...... -- +----------------------------------------------------------------------------+ + Bruce S. Marshall bmarsh@bmarsh.com Bellaire, MI 08/30/04 12:53 + +----------------------------------------------------------------------------+ "Baseball is 90% mental, the other half is physical" -- Yogi Berra
On Monday 30 August 2004 18:54, Bruce Marshall wrote:
On Monday 30 August 2004 11:11 am, Charles Berman wrote:
The fact that ive tried to unsubscribe from this fuckin list 4 times in the past month but I continue to get bullshit from it.
You mean BS like the unprofessional crap you just spewed???
Get a clue if you can't read the bottom of every email for the unsubscribe info. And being totally clueless, you probably changed your email address and are trying to unsub with a different address than you originally subscribed with.
Someone please get rid of this screwball......
In cases such as these, couldn't the SuSE webmaster put the user out of his misery? He's getting nowhere. We can't help him anymore and a painless injection is all that's needed. Surely it's the humane thing to do. Is there still anyone on the list who has anything to do with SuSE these days? Just an idea. Cheers from Steve.
On Mon, 30 Aug 2004 11:11:33 -0400
"Charles Berman"
The fact that ive tried to unsubscribe from this fuckin list 4 times in the past month but I continue to get bullshit from it.
No, what sucks most is your post. I feel sorry for you. Terence
On Mon August 30 2004 9:42 am, Fareed Hussein wrote:
Dear users,
When installing SuSE Enterprise Server 8 on a Compaq Proliant ML310 server, we get a error "Hard disk not found" I assume its because a Smart Array Driver is required. Please may you advise where I can download the Compaq Smart Array 641 boot-time loadable device driver? Do I press ALT then insert the floppy disk during the install process? I have created a driver disk using rawwrite, press ALT at installation, insert disk, but SuSE just does nothing... Does not detect any controller.
Any help is much appreciated.
Thanks Fareed
Did you SmartStart this server and choose Linux as the OS? Make sure you do the complete erase first and start with a clean machine. Stan
At 16:42 30/08/2004, Fareed Hussein wrote:
Dear users,
When installing SuSE Enterprise Server 8 on a Compaq Proliant ML310 server, we get a error "Hard disk not found" I assume its because a Smart Array Driver is required. Please may you advise where I can download the Compaq Smart Array 641 boot-time loadable device driver? Do I press ALT then insert the floppy disk during the install process? I have created a driver disk using rawwrite, press ALT at installation, insert disk, but SuSE just does nothing... Does not detect any controller.
Any help is much appreciated.
cpq_cciss-2.4.50-26.ul10.i386.dd image disk (http://h18000.www1.hp.com/support/files/server/us/download/21190.html) is made for UnitedLinux, for use it for SLES8, you have to redefine the directory structure, see : http://ftp.gwdg.de/pub/linux/suse/ftp.suse.com/people/hvogel/Update-Media-HO... sorry for my bad english, if you don't understand anything, mail me. ----------------------------------------------------- Vincent Propice DOING - GROUPE NEYRIAL Le Delta 1, allée de l'Electronique B.P. 185 42005 Saint-Etienne cedex 1 - France Tel. : 33 (0)4 77 42 37 37 - Fax : 33 (0)4 77 42 37 38 Web: www.doing.fr Email : vpropice@doing.fr -----------------------------------------------------
participants (13)
-
Andre Truter -
Bruce Marshall -
Charles Berman -
Danny Sauer -
Fareed Hussein -
Hans du Plooy -
James Knott -
Maurizio Mariani -
Mike -
SRGlasoe -
steve-ss -
Terence McCarthy -
Vincent Propice