Hi,

Is this addon you talking about from opensuse repo? What is that addon?

Andy

On 2/17/21 3:13 PM, Patrick Shanahan wrote:

• Michael Spartana furryllama@comcast.net [02-17-21 13:34]:

...

Hi,

I believe there is a problem with the latest tumbleweed version of hplip (hplip-3.20.11-1.4.x86_64 )

I am unable to install the plugin and am getting the error:

Error importing HPLIP modules.  Is HPLIP installed?

I checked on google and this type of error has been seen before. Probably no one else has seen it

on tumbleweed as most tumbleweed users probably don't keep reinstalling the OS.

I'm not on factory so could someone look into this.....Thanks,

I installed hplip-3.20.11-1.4.x86_64 using zypper but no additional "module" was requested or suggested. in what manner did you receive this request or how did you install hplip?

ps: do not use hp's offering, but use the package from the Tumbleweed repo.

Yes Patrick I used the opensuse version as I had to reinstall tumbleweed.

I tried hp-setup which said it was installed successfully, then got:

The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins.

Please run 'hp-plugin' as normal user to install plug-ins.

and the setup stopped. I then used hp-plugin and that said the plugin was installed. So then I tried the hp program

and that's when I got the "is hplip installed" ?

So I'm kind of stumped. The printed was working fine with previous tumbleweed.

mike

* Michael Spartana furryllama@comcast.net [02-17-21 16:01]:

On 2/17/21 3:13 PM, Patrick Shanahan wrote:

...

• Michael Spartana furryllama@comcast.net [02-17-21 13:34]:

...

Hi,

I believe there is a problem with the latest tumbleweed version of hplip (hplip-3.20.11-1.4.x86_64 )

I am unable to install the plugin and am getting the error:

Error importing HPLIP modules.  Is HPLIP installed?

I checked on google and this type of error has been seen before. Probably no one else has seen it

on tumbleweed as most tumbleweed users probably don't keep reinstalling the OS.

I'm not on factory so could someone look into this.....Thanks,

I installed hplip-3.20.11-1.4.x86_64 using zypper but no additional "module" was requested or suggested. in what manner did you receive this request or how did you install hplip?

ps: do not use hp's offering, but use the package from the Tumbleweed repo.

Yes Patrick I used the opensuse version as I had to reinstall tumbleweed.

I tried hp-setup which said it was installed successfully, then got:

The device you are trying to setup requires a binary plug-in. Some functionalities may not work as expected without plug-ins.

Please run 'hp-plugin' as normal user to install plug-ins.

and the setup stopped. I then used hp-plugin and that said the plugin was installed. So then I tried the hp program

and that's when I got the "is hplip installed" ?

So I'm kind of stumped. The printed was working fine with previous tumbleweed.

ok, I have not every been asked to install a plugin but I find the installer, hp-plugin, and tried it, chose "Download and ..." it answered "Unable to receive key ..." and I opted to still install and it indicated it would install 64 packages and I stopped it.

fwiw, I have not had to go this route before.

what printer are you trying to install and how is it connected, network or usb. perhaps we can still connect your printer w/o this "plugin".

* Michael Spartana furryllama@comcast.net [02-17-21 19:12]:

On 2/17/21 5:32 PM, Patrick Shanahan wrote:

...

• Michael Spartana furryllama@comcast.net [02-17-21 16:01]:

[...]

...

fwiw, I have not had to go this route before.

what printer are you trying to install and how is it connected, network or usb. perhaps we can still connect your printer w/o this "plugin".

The printer is HP Laser Jet Pro MFP M127fw

Well I've been concentrating on this problem so much that I forgot about Yast.

So I set it up and it printed,  but still the HP widget says there is no HP device on

the system.  It woulf be great if I had that too.

I used HP-Setup and found all except 2 packages...python3-pyqt4-dbus and python3-pyqt4.

you failed to answer "how is it connected" and that is probably your problem, network I bet.

I tried different names and no go. Also hp-doctor says no scanext. The last error says it

failed to read the .ppd file although I know it's there.

I'm sure that most of these are because of tumbleweed.....

not sure I understand that statement, in my experience *most* problems are <user> and I include myself.

/usr/share/cups/model/manufacturer-PPDs/hplip-plugin/hp-laserjet_pro_mfp_m127fw.ppd.gz

rpm -qf /usr/share/cups/model/manufacturer-PPDs/hplip-plugin/hp-laserjet_pro_mfp_m127fw.ppd.gz hplip-3.20.11-1.4.x86_64

* Michael Spartana furryllama@comcast.net [02-17-21 20:14]:

On 2/17/21 7:38 PM, Patrick Shanahan wrote:

...

• Michael Spartana furryllama@comcast.net [02-17-21 19:12]:

...

On 2/17/21 5:32 PM, Patrick Shanahan wrote:

...

• Michael Spartana furryllama@comcast.net [02-17-21 16:01]:

[...]

...

...

fwiw, I have not had to go this route before.

what printer are you trying to install and how is it connected, network or usb. perhaps we can still connect your printer w/o this "plugin".

The printer is HP Laser Jet Pro MFP M127fw

Well I've been concentrating on this problem so much that I forgot about Yast.

So I set it up and it printed,  but still the HP widget says there is no HP device on

the system.  It woulf be great if I had that too.

I used HP-Setup and found all except 2 packages...python3-pyqt4-dbus and python3-pyqt4.

you failed to answer "how is it connected" and that is probably yourproblem, network I bet.

....network.....

...

...

I tried different names and no go. Also hp-doctor says no scanext. The last error says it

failed to read the .ppd file although I know it's there.

I'm sure that most of these are because of tumbleweed.....

not sure I understand that statement, in my experience *most* problems are <user> and I include myself.

/usr/share/cups/model/manufacturer-PPDs/hplip-plugin/hp-laserjet_pro_mfp_m127fw.ppd.gz

rpm -qf /usr/share/cups/model/manufacturer-PPDs/hplip-plugin/hp-laserjet_pro_mfp_m127fw.ppd.gz hplip-3.20.11-1.4.x86_64

ok that is exactly where mine is so I have no idea what hp-doctor is complaining about....

Our versions of hplip are the same too.  Well I'll use it like it is until I figure how to get the

HP Status Service widget working....Thanks

will not work until you get hplip set up.

1. hp-setup 2. Device Discovery arises 3. choose Network choose Advanced Options enter "Search term:" <ip-addr-printer> stop firewall 4. choose Next

you should be able to follow from there.

gud luk,

Am 17.02.21 um 19:32 schrieb Michael Spartana:

Hi,

I believe there is a problem with the latest tumbleweed version of hplip (hplip-3.20.11-1.4.x86_64 )

I am unable to install the plugin and am getting the error:

Error importing HPLIP modules.  Is HPLIP installed?

I checked on google and this type of error has been seen before.  Probably no one else has seen it

on tumbleweed as most tumbleweed users probably don't keep reinstalling the OS.

I'm not on factory so could someone look into this.....Thanks,

mike

I'm using 15.2 with the additional obs:/Printing repo.

Here, I can install hplip, hplip-hpijs, hplip-sane, and hplip-scan-utils to use with my HP M277dw. Then, there is no need for me to install any plugin from HP directly.

And yes, I tried that way too. Very funny to have this plugin search for a .hplip directory *everywhere*. Especially as I was at home, connected via VPN to my office, having mounted about 1 Petabyte of shared file systems and this piece of malconstructed installer tried to find .hplip all over there...

Werner --

On 2/20/21 6:45 AM, Werner Flamme wrote:

Am 17.02.21 um 19:32 schrieb Michael Spartana:

...

Hi,

I believe there is a problem with the latest tumbleweed version of hplip (hplip-3.20.11-1.4.x86_64 )

I am unable to install the plugin and am getting the error:

Error importing HPLIP modules.  Is HPLIP installed?

I checked on google and this type of error has been seen before.  Probably no one else has seen it

on tumbleweed as most tumbleweed users probably don't keep reinstalling the OS.

I'm not on factory so could someone look into this.....Thanks,

mike

I'm using 15.2 with the additional obs:/Printing repo.

Hi Werner,

I'm not sure I understand OBS. Don't you need an account. I believe

It's for people that make opensuse packages. So I didn't know anyone

could add a repository.

Here, I can install hplip, hplip-hpijs, hplip-sane, and hplip-scan-utils to use with my HP M277dw. Then, there is no need for me to install any plugin from HP directly.

Well I got hplip and hplip-sane already. Tumbleweed doesn't have hplip-hpijs.

The hplip-scan-utils required 196 packages. Still need hplip-ijs.

mike spartana

And yes, I tried that way too. Very funny to have this plugin search for a .hplip directory *everywhere*. Especially as I was at home, connected via VPN to my office, having mounted about 1 Petabyte of shared file systems and this piece of malconstructed installer tried to find .hplip all over there...

Werner

On 2/20/21 12:10 PM, Michael Spartana wrote:

On 2/20/21 6:45 AM, Werner Flamme wrote:

...

Am 17.02.21 um 19:32 schrieb Michael Spartana:

...

Hi,

I believe there is a problem with the latest tumbleweed version of hplip (hplip-3.20.11-1.4.x86_64 )

I am unable to install the plugin and am getting the error:

Error importing HPLIP modules.  Is HPLIP installed?

I checked on google and this type of error has been seen before.  Probably no one else has seen it

on tumbleweed as most tumbleweed users probably don't keep reinstalling the OS.

I'm not on factory so could someone look into this.....Thanks,

mike

I'm using 15.2 with the additional obs:/Printing repo.

Hi Werner,

I'm not sure I understand OBS. Don't you need an account. I believe

It's for people that make opensuse packages. So I didn't know anyone

could add a repository.

...

Here, I can install hplip, hplip-hpijs, hplip-sane, and hplip-scan-utils to use with my HP M277dw. Then, there is no need for me to install any plugin from HP directly.

Well I got hplip and hplip-sane already. Tumbleweed doesn't have hplip-hpijs.

The hplip-scan-utils required 196 packages. Still need hplip-ijs.

mike spartana

Sure TW does, look here . . .

https://software.opensuse.org/package/hplip-hpijs

Btw, I think that the Sauerland:sane OBS repo has a newer version of all 4 HP packages.

Re hplip-scan-utils, all but a small number of those dependencies are just python.

--dg