I am using SuSE 7.1 with the 2.4.2 kernel from the SuSE ftp site and have a Phillips SCSI CDRW on an ISA Adaptec 1542 card. I have played around with isapnp until I now get this in my boot log.

"Initializing PnP devices
Board 1 has Identity b6 ff ff ff ff 35 68 63 0e: CSC6835 Serial No -1 [checksum b6]
Board 2 has Identity 86 94 9c 73 43 42 15 90 04: ADP1542 Serial No 2493281091 [checksum 86]
CSC6835/-1[0]{WSS/SB              }: Ports 0x534 0x388 0x220; IRQ5 DMA1 DMA0 --- Enabled OK
CSC6835/-1[1]{Game                }: Port 0x3A0; --- Enabled OK
CSC6835/-1[2]{Ctrl                }: Port 0xF00; --- Enabled OK
CSC6835/-1[3]{MPU                 }: Port 0x330; --- Enabled OK
ADP1542/2493281091[0]{SCSI Host Adapter   }: IRQ10 DMA5 --- Enabled OK
done"

This looks to me like everything would be ok, yet attempts to mount the device give "mount: /dev/sda1: unknown device". Also, in /proc/scsi/scsi is only one line that reads, "Attached devices: none".

I tried to do "insmod aha1542" and get
"Using /lib/modules/2.4.2-4GB/kernel/drivers/scsi/aha1542.o
/lib/modules/2.4.2-4GB/kernel/drivers/scsi/aha1542.o: unresolved symbol isapnp_find_dev"

I also found this in my boot log,
"<6>SCSI subsystem driver Revision: 1.00
<4>3w-xxxx: tw_findcards(): No cards found.
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted"

Any ideas?

Jason Joines
-------------------------------------------------------------