27: PCI c00.0: 0282 WLAN controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_8086_4232 Unique ID: y9sn.ac08gXgxBHC Parent ID: qTvu.dXCfC9GEOZF SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:0c:00.0 SysFS BusID: 0000:0c:00.0 Hardware Class: network Model: "Intel Wireless WiFi Link 5100" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x4232 "Wireless WiFi Link 5100" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1321 Driver: "iwlagn" Driver Modules: "iwlagn" Device File: wlan0 Features: WLAN Memory Range: 0xf69fe000-0xf69fffff (rw,non-prefetchable) IRQ: 218 (5068 events) HW Address: 00:22:fb:09:7e:a6 Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 149 153 157 161 165 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 5.18 5.2 5.22 5.24 5.26 5.28 5.3 5.32 5.745 5.765 5.785 5.805 5.825 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00008086d00004232sv00008086sd00001321bc02sc80i00" Driver Info #0: Driver Status: iwlagn is active Driver Activation Cmd: "modprobe iwlagn" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #17 (PCI bridge) 28: PCI 900.0: 0200 Ethernet controller [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_14e4_1674 Unique ID: rBUF.4xGw1BZduKA Parent ID: QSNP.j0t85azSYs1 SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:09:00.0 SysFS BusID: 0000:09:00.0 Hardware Class: network Model: "Broadcom NetXtreme BCM5756ME Gigabit Ethernet PCI Express" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x1674 "NetXtreme BCM5756ME Gigabit Ethernet PCI Express" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0262 Driver: "tg3" Driver Modules: "tg3" Device File: eth0 Memory Range: 0xf68f0000-0xf68fffff (rw,non-prefetchable) IRQ: 219 (3 events) HW Address: 00:21:9b:e0:46:82 Link detected: no Module Alias: "pci:v000014E4d00001674sv00001028sd00000262bc02sc00i00" Driver Info #0: Driver Status: tg3 is active Driver Activation Cmd: "modprobe tg3" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #18 (PCI bridge)