Linux version 2.2.19 (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Fri May 18 14:11:19 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 0009f000 @ 00000000 (usable) BIOS-e820: 17f00000 @ 00100000 (usable) Detected 604075 kHz processor. ide_setup: hdd=ide-scsi Console: colour dummy device 80x25 Calibrating delay loop... 1202.58 BogoMIPS Memory: 386504k/393216k available (1488k kernel code, 408k reserved, 4284k data, 88k init, 0k bigmem) Dentry hash table entries: 65536 (order 7, 512k) Buffer cache hash table entries: 524288 (order 9, 2048k) Page cache hash table entries: 131072 (order 7, 512k) Inode hash table entries: 32768 (256k), inode-max: 24576 VFS: Diskquotas version dquot_6.4.0 initialized CPU: L1 I Cache: 64K L1 D Cache: 64K CPU: L2 Cache: 64K CPU: AMD Duron(tm) Processor stepping 00 Enabling fast FPU save and restore... done. Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xfb480, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 524288 bhash 65536) IPVS: Connection hash table configured (size=4096, memory=32Kbytes) Initializing RT netlink socket Starting kswapd v 1.5 vesafb: framebuffer at 0xe4000000, mapped to 0xd8809000, size 32768k vesafb: mode is 800x600x8, linelength=800, pages=63 vesafb: protected mode interface info at c000:4af6 vesafb: scrolling: redraw Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device Detected PS/2 Mouse Port. Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 64000K size loop: registered device at major 7 Uniform Multi-Platform E-IDE driver Revision: 6.30 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 33073H4, ATA DISK drive hdc: SAMSUNG DVD-ROM SD-612F, ATAPI CDROM drive hdd: Hewlett-Packard CD-Writer Plus 7500, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: Maxtor 33073H4, 29311MB w/512kB Cache, CHS=3736/255/63, UDMA(66) hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 1404.366 MB/sec p5_mmx : 1757.553 MB/sec 8regs : 812.292 MB/sec 32regs : 654.939 MB/sec using fastest function: p5_mmx (1757.553 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > RAMDISK: Compressed image found at block 0 Uncompressing................................done. autodetecting RAID arrays autorun ... ... autorun DONE. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13) VFS: Mounted root (ext2 filesystem). parport0: PC-style at 0x378 [SPP] ppa: Version 2.07 (for Linux 2.2.x) ppa: Found device at ID 6, Attempting to use EPP 32 bit ppa: Found device at ID 6, Attempting to use SPP ppa: Communication established with ID 6 using SPP scsi0 : Iomega VPI0 (ppa) interface scsi : 1 host. Vendor: IOMEGA Model: ZIP 100 Rev: D.09 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sda at scsi0, channel 0, id 6, lun 0 sda : READ CAPACITY failed. sda : status = 0, message = 00, host = 0, driver = 08 sda : extended sense code = 2 sda : block size assumed to be 512 bytes, disk size 1GB. sda:scsidisk I/O error: dev 08:00, sector 0 unable to read partition table autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 88k freed Adding Swap: 265032k swap-space (priority 42) scsi1 : SCSI host adapter emulation for IDE ATAPI devices scsi : 2 hosts. Vendor: HP Model: CD-Writer+ 7500 Rev: 1.0a Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray eth0: 8139too FastEthernet driver 0.9.14-2.2 Jeff Garzik eth0: Linux-2.2 bug reports to Jens David eth0: RealTek RTL8139 Fast Ethernet board found at 0xda844000, IRQ 11 eth0: Chip is 'RTL-8139B' - MAC address '00:00:21:f9:4e:b5'. eth0: Setting 100Mbps full-duplex based on auto-negotiated partner ability 45e1. CSLIP: code copyright 1989 Regents of the University of California PPP: version 2.3.7 (demand dialling) PPP line discipline registered. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.237 $ time 14:20:26 May 18 2001 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid usb.c: USB new device connect, assigned device number 2 mice: PS/2 mouse device common for all mice usb.c: registered new driver usblp printer.c: Disabling reads from problem bidirectional printer on usblp0 printer.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 hub.c: already running port 2 disabled by hub (EMI?), re-enabling... usb.c: USB disconnect on device 2 usb.c: USB new device connect, assigned device number 2 printer.c: Disabling reads from problem bidirectional printer on usblp0 printer.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de) eth0: no IPv6 routers present eth0: no IPv6 routers present