Hi All Today I restarted my SuSE 8.2 box and a red message came up : "'failed". I looked in the startup log and below you can see the result. Although there seems to be nothing wrong , I'm still curious to find out what and why this message came up. Anybody an idea? Thanks. Options: -a get/set fs readahead -A set drive read-lookahead flag (0/1) -b get/set bus state (0 == off, 1 == on, 2 == tristate) -B set Advanced Power Management setting (1-255) -c get/set IDE 32-bit IO setting -C check IDE power mode status -d get/set using_dma flag -D enable/disable drive defect-mgmt -E set cd-rom drive speed -f flush buffer cache for device on exit -g display drive geometry -h display terse usage information -i display drive identification -I detailed/current information directly from drive -Istdin similar to -I, but wants /proc/ide/*/hd?/identify as input -k get/set keep_settings_over_reset flag (0/1) -K set drive keep_features_over_reset flag (0/1) -L set drive doorlock (0/1) (removable harddisks only) -M get/set acoustic management (0-254, 128: quiet, 254: fast) (EXPERIMENTAL) -m get/set multiple sector count -n get/set ignore-write-errors flag (0/1) -p set PIO mode on IDE interface chipset (0,1,2,3,4,...) -P set drive prefetch count -q change next setting quietly -Q get/set DMA tagged-queuing depth (if supported) -r get/set readonly flag (DANGEROUS to set) -R register an IDE interface (DANGEROUS) -S set standby (spindown) timeout -t perform device read timings -T perform cache read timings -u get/set unmaskirq flag (0/1) -U un-register an IDE interface (DANGEROUS) -v defaults; same as -mcudkrag for IDE drives -V display program version and exit immediately -w perform device reset (DANGEROUS) -W set drive write-caching flag (0/1) (DANGEROUS) -x tristate device for hotswap (0/1) (DANGEROUS) -X set IDE xfer mode (DANGEROUS) -y put IDE drive in standby mode -Y put IDE drive to sleep -Z disable Seagate auto-powersaving mode -z re-read partition table failed -- Greetings from /bill at 169 west , 19 south. Disclaimer: Any errors in spelling, tact, or fact are transmission errors."