dsp 118 rate code 0x0a
[ 1023.238426] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 51 dsp 118 rate code 0x14
[ 1023.238431] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1023.238439] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 51 dsp 118 rate code 0x37
[ 1023.238444] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 51 dsp 118 rate code 0x6e
[ 1023.238448] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.238453] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.238460] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x046D, 56 bytes at 109[13]:4
[ 1023.238548] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.238578] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1023.238584] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1023.238588] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1023.238593] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.238599] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x046E, 68 bytes at 110[14]:4
[ 1023.238668] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.238692] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1023.238696] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1023.238701] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1023.238706] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1023.238711] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1023.238718] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.238722] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.238728] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x046F, 56 bytes at 111[15]:4
[ 1023.238792] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.238815] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.238819] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.238825] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0470, 56 bytes at 112[16]:4
[ 1023.238890] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.238914] ieee80211 phy0: U iwl_mac_config leave
[ 1023.361131] ieee80211 phy0: U iwl_mac_config enter to channel 64 changed 0x40
[ 1023.361148] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 64 [1]
[ 1023.361164] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1023.361166] * without RXON_FILTER_ASSOC_MSK
[ 1023.361167] * channel = 64
[ 1023.361169] * bssid = 00:00:00:00:00:00
[ 1023.361175] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1023.361180] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1023.361191] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0471, 48 bytes at 113[17]:4
[ 1023.362273] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1023.362308] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0472, 4 bytes at 114[18]:4
[ 1023.362338] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x0d
[ 1023.362343] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x0f
[ 1023.362348] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x05
[ 1023.362353] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x07
[ 1023.362358] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x09
[ 1023.362363] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x0b
[ 1023.362368] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 115 dsp 118 rate code 0x01
[ 1023.362373] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 83 dsp 121 rate code 0x03
[ 1023.362379] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x0a
[ 1023.362382] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1023.362390] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x14
[ 1023.362395] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x37
[ 1023.362400] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x6e
[ 1023.362405] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.362410] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.362417] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0473, 56 bytes at 115[19]:4
[ 1023.362504] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.362532] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1023.362539] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1023.362543] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1023.362548] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.362554] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0474, 68 bytes at 116[20]:4
[ 1023.362622] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.362649] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1023.362654] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1023.362659] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1023.362664] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1023.362669] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1023.362678] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.362683] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.362689] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0475, 56 bytes at 117[21]:4
[ 1023.362753] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.362779] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.362784] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.362790] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0476, 56 bytes at 118[22]:4
[ 1023.362855] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.362881] ieee80211 phy0: U iwl_mac_config leave
[ 1023.485171] ieee80211 phy0: U iwl_mac_config enter to channel 100 changed 0x60
[ 1023.485182] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 100 [1]
[ 1023.485192] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1023.485194] * without RXON_FILTER_ASSOC_MSK
[ 1023.485196] * channel = 100
[ 1023.485197] * bssid = 00:00:00:00:00:00
[ 1023.485203] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1023.485208] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1023.485216] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0477, 48 bytes at 119[23]:4
[ 1023.486325] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1023.486363] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0478, 4 bytes at 120[24]:4
[ 1023.486384] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0d
[ 1023.486389] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0f
[ 1023.486395] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x05
[ 1023.486436] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1023.486443] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x07
[ 1023.486448] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x09
[ 1023.486454] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0b
[ 1023.486459] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 27 dsp  98 rate code 0x01
[ 1023.486464] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 111 rate code 0x03
[ 1023.486469] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x0a
[ 1023.486474] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x14
[ 1023.486479] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x37
[ 1023.486484] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x6e
[ 1023.486489] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.486494] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.486500] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0479, 56 bytes at 121[25]:4
[ 1023.486606] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.486622] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1023.486631] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1023.486638] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1023.486644] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.486653] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x047A, 68 bytes at 122[26]:4
[ 1023.486743] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.486778] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1023.486783] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1023.486788] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1023.486793] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1023.486797] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1023.486803] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.486807] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.486813] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x047B, 56 bytes at 123[27]:4
[ 1023.486900] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.486915] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.486922] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.486931] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x047C, 56 bytes at 124[28]:4
[ 1023.487017] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.487028] ieee80211 phy0: U iwl_mac_config TX Power old=15 new=16
[ 1023.487033] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0d
[ 1023.487038] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0f
[ 1023.487043] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x05
[ 1023.487048] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x07
[ 1023.487053] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x09
[ 1023.487058] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0b
[ 1023.487063] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 27 dsp  98 rate code 0x01
[ 1023.487068] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 111 rate code 0x03
[ 1023.487073] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x0a
[ 1023.487078] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x14
[ 1023.487083] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x37
[ 1023.487088] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x6e
[ 1023.487092] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.487097] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.487103] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x047D, 56 bytes at 125[29]:4
[ 1023.487213] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.487228] ieee80211 phy0: U iwl_mac_config leave
[ 1023.608052] ieee80211 phy0: U iwl_mac_config enter to channel 104 changed 0x40
[ 1023.608066] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 104 [1]
[ 1023.608079] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1023.608082] * without RXON_FILTER_ASSOC_MSK
[ 1023.608085] * channel = 104
[ 1023.608087] * bssid = 00:00:00:00:00:00
[ 1023.608094] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1023.608101] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1023.608113] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x047E, 48 bytes at 126[30]:4
[ 1023.609223] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1023.609250] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x047F, 4 bytes at 127[31]:4
[ 1023.609282] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x0d
[ 1023.609328] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1023.609338] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x0f
[ 1023.609346] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x05
[ 1023.609354] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x07
[ 1023.609361] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x09
[ 1023.609369] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x0b
[ 1023.609377] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 27 dsp  98 rate code 0x01
[ 1023.609384] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 111 rate code 0x03
[ 1023.609391] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x0a
[ 1023.609399] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x14
[ 1023.609407] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x37
[ 1023.609415] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x6e
[ 1023.609421] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.609428] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.609438] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0480, 56 bytes at 128[0]:4
[ 1023.609534] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.609556] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1023.609564] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1023.609572] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1023.609578] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.609588] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0481, 68 bytes at 129[1]:4
[ 1023.609660] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.609678] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1023.609684] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1023.609691] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1023.609699] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1023.609706] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1023.609715] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.609722] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.609731] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0482, 56 bytes at 130[2]:4
[ 1023.609801] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.609843] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.609849] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.609859] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0483, 56 bytes at 131[3]:4
[ 1023.609928] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.609945] ieee80211 phy0: U iwl_mac_config leave
[ 1023.732052] ieee80211 phy0: U iwl_mac_config enter to channel 108 changed 0x40
[ 1023.732064] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 108 [1]
[ 1023.732074] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1023.732076] * without RXON_FILTER_ASSOC_MSK
[ 1023.732078] * channel = 108
[ 1023.732079] * bssid = 00:00:00:00:00:00
[ 1023.732085] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1023.732090] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1023.732098] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0484, 48 bytes at 132[4]:4
[ 1023.733208] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1023.733273] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0485, 4 bytes at 133[5]:4
[ 1023.733294] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x0d
[ 1023.733299] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x0f
[ 1023.733305] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x05
[ 1023.733310] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x07
[ 1023.733315] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x09
[ 1023.733320] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x0b
[ 1023.733325] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 27 dsp  98 rate code 0x01
[ 1023.733330] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 111 rate code 0x03
[ 1023.733335] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x0a
[ 1023.733341] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x14
[ 1023.733346] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1023.733353] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x37
[ 1023.733358] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x6e
[ 1023.733363] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.733368] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.733381] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0486, 56 bytes at 134[6]:4
[ 1023.733477] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.733522] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1023.733527] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1023.733532] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1023.733536] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.733543] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0487, 68 bytes at 135[7]:4
[ 1023.733612] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.733640] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1023.733644] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1023.733649] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1023.733655] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1023.733659] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1023.733665] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.733670] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.733676] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0488, 56 bytes at 136[8]:4
[ 1023.733741] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.733767] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.733771] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.733778] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0489, 56 bytes at 137[9]:4
[ 1023.733843] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.733868] ieee80211 phy0: U iwl_mac_config leave
[ 1023.857058] ieee80211 phy0: U iwl_mac_config enter to channel 112 changed 0x40
[ 1023.857073] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 112 [1]
[ 1023.857086] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1023.857089] * without RXON_FILTER_ASSOC_MSK
[ 1023.857091] * channel = 112
[ 1023.857093] * bssid = 00:00:00:00:00:00
[ 1023.857101] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1023.857107] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1023.857119] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x048A, 48 bytes at 138[10]:4
[ 1023.858296] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1023.858342] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x048B, 4 bytes at 139[11]:4
[ 1023.858371] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x0d
[ 1023.858416] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1023.858426] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x0f
[ 1023.858433] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x05
[ 1023.858441] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x07
[ 1023.858448] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x09
[ 1023.858456] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x0b
[ 1023.858464] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 27 dsp  98 rate code 0x01
[ 1023.858471] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 111 rate code 0x03
[ 1023.858479] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x0a
[ 1023.858486] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x14
[ 1023.858494] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x37
[ 1023.858502] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x6e
[ 1023.858509] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.858516] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.858525] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x048C, 56 bytes at 140[12]:4
[ 1023.858636] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.858657] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1023.858665] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1023.858673] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1023.858679] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.858688] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x048D, 68 bytes at 141[13]:4
[ 1023.858777] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.858794] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1023.858801] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1023.858808] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1023.858815] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1023.858822] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1023.858831] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.858838] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.858848] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x048E, 56 bytes at 142[14]:4
[ 1023.858938] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.858954] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.858960] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.858970] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x048F, 56 bytes at 143[15]:4
[ 1023.859053] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.859069] ieee80211 phy0: U iwl_mac_config leave
[ 1023.980043] ieee80211 phy0: U iwl_mac_config enter to channel 116 changed 0x40
[ 1023.980054] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 116 [1]
[ 1023.980064] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1023.980066] * without RXON_FILTER_ASSOC_MSK
[ 1023.980067] * channel = 116
[ 1023.980069] * bssid = 00:00:00:00:00:00
[ 1023.980074] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1023.980079] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1023.980087] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0490, 48 bytes at 144[16]:4
[ 1023.981164] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1023.981182] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0491, 4 bytes at 145[17]:4
[ 1023.981202] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x0d
[ 1023.981208] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x0f
[ 1023.981213] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x05
[ 1023.981260] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1023.981267] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x07
[ 1023.981272] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x09
[ 1023.981277] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x0b
[ 1023.981282] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 27 dsp  98 rate code 0x01
[ 1023.981287] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 111 rate code 0x03
[ 1023.981292] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x0a
[ 1023.981297] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x14
[ 1023.981302] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x37
[ 1023.981307] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x6e
[ 1023.981312] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1023.981317] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.981323] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0492, 56 bytes at 146[18]:4
[ 1023.981412] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1023.981458] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1023.981466] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1023.981471] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1023.981476] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.981483] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0493, 68 bytes at 147[19]:4
[ 1023.981553] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1023.981578] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1023.981582] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1023.981587] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1023.981593] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1023.981598] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1023.981605] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.981609] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.981616] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0494, 56 bytes at 148[20]:4
[ 1023.981683] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.981707] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1023.981712] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.981718] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0495, 56 bytes at 149[21]:4
[ 1023.981786] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1023.981809] ieee80211 phy0: U iwl_mac_config leave
[ 1024.104187] ieee80211 phy0: U iwl_mac_config enter to channel 120 changed 0x40
[ 1024.104198] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 120 [1]
[ 1024.104208] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.104210] * without RXON_FILTER_ASSOC_MSK
[ 1024.104212] * channel = 120
[ 1024.104213] * bssid = 00:00:00:00:00:00
[ 1024.104218] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.104223] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.104231] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0496, 48 bytes at 150[22]:4
[ 1024.105321] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.105361] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0497, 4 bytes at 151[23]:4
[ 1024.105383] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x0d
[ 1024.105388] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x0f
[ 1024.105393] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x05
[ 1024.105398] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x07
[ 1024.105404] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x09
[ 1024.105409] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x0b
[ 1024.105414] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 59 dsp  96 rate code 0x01
[ 1024.105419] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x03
[ 1024.105424] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x0a
[ 1024.105429] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x14
[ 1024.105435] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.105441] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x37
[ 1024.105446] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x6e
[ 1024.105451] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.105455] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.105462] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0498, 56 bytes at 152[24]:4
[ 1024.105551] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.105578] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.105584] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.105589] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.105593] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.105600] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0499, 68 bytes at 153[25]:4
[ 1024.105669] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.105695] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.105700] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.105705] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.105711] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.105715] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.105722] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.105726] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.105732] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x049A, 56 bytes at 154[26]:4
[ 1024.105799] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.105842] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.105847] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.105853] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x049B, 56 bytes at 155[27]:4
[ 1024.105918] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.105940] ieee80211 phy0: U iwl_mac_config leave
[ 1024.228176] ieee80211 phy0: U iwl_mac_config enter to channel 124 changed 0x40
[ 1024.228191] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 124 [1]
[ 1024.228205] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.228207] * without RXON_FILTER_ASSOC_MSK
[ 1024.228210] * channel = 124
[ 1024.228212] * bssid = 00:00:00:00:00:00
[ 1024.228219] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.228226] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.228238] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x049C, 48 bytes at 156[28]:4
[ 1024.229349] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.229429] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x049D, 4 bytes at 157[29]:4
[ 1024.229460] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x0d
[ 1024.229469] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x0f
[ 1024.229476] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x05
[ 1024.229484] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x07
[ 1024.229491] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x09
[ 1024.229499] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x0b
[ 1024.229507] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.229516] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 59 dsp  96 rate code 0x01
[ 1024.229524] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x03
[ 1024.229532] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x0a
[ 1024.229540] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x14
[ 1024.229547] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x37
[ 1024.229554] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x6e
[ 1024.229561] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.229567] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.229577] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x049E, 56 bytes at 158[30]:4
[ 1024.229670] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.229707] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.229716] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.229723] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.229729] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.229739] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x049F, 68 bytes at 159[31]:4
[ 1024.229812] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.229847] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.229854] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.229861] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.229869] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.229876] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.229886] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.229893] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.229902] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04A0, 56 bytes at 160[0]:4
[ 1024.229974] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.230003] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.230010] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.230019] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04A1, 56 bytes at 161[1]:4
[ 1024.230091] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.230119] ieee80211 phy0: U iwl_mac_config leave
[ 1024.352191] ieee80211 phy0: U iwl_mac_config enter to channel 128 changed 0x40
[ 1024.352206] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 128 [1]
[ 1024.352219] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.352222] * without RXON_FILTER_ASSOC_MSK
[ 1024.352225] * channel = 128
[ 1024.352227] * bssid = 00:00:00:00:00:00
[ 1024.352234] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.352241] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.352253] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04A2, 48 bytes at 162[2]:4
[ 1024.353395] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.353465] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04A3, 4 bytes at 163[3]:4
[ 1024.353500] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x0d
[ 1024.353508] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x0f
[ 1024.353516] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x05
[ 1024.353523] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x07
[ 1024.353531] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x09
[ 1024.353538] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x0b
[ 1024.353547] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.353557] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 59 dsp  96 rate code 0x01
[ 1024.353565] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x03
[ 1024.353573] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x0a
[ 1024.353580] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x14
[ 1024.353588] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x37
[ 1024.353595] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x6e
[ 1024.353602] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.353609] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.353619] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04A4, 56 bytes at 164[4]:4
[ 1024.353716] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.353759] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.353768] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.353776] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.353782] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.353792] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04A5, 68 bytes at 165[5]:4
[ 1024.353866] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.353902] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.353909] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.353916] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.353924] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.353931] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.353941] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.353948] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.353957] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04A6, 56 bytes at 166[6]:4
[ 1024.354027] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.354062] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.354069] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.354079] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04A7, 56 bytes at 167[7]:4
[ 1024.354149] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.354178] ieee80211 phy0: U iwl_mac_config leave
[ 1024.476364] ieee80211 phy0: U iwl_mac_config enter to channel 132 changed 0x40
[ 1024.476375] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 132 [1]
[ 1024.476385] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.476387] * without RXON_FILTER_ASSOC_MSK
[ 1024.476388] * channel = 132
[ 1024.476390] * bssid = 00:00:00:00:00:00
[ 1024.476395] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.476400] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.476409] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04A8, 48 bytes at 168[8]:4
[ 1024.477491] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.477512] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04A9, 4 bytes at 169[9]:4
[ 1024.477534] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x0d
[ 1024.477539] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x0f
[ 1024.477544] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x05
[ 1024.477588] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.477595] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x07
[ 1024.477600] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x09
[ 1024.477605] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x0b
[ 1024.477611] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 59 dsp  96 rate code 0x01
[ 1024.477616] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x03
[ 1024.477621] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x0a
[ 1024.477626] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x14
[ 1024.477631] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x37
[ 1024.477636] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x6e
[ 1024.477641] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.477645] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.477652] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04AA, 56 bytes at 170[10]:4
[ 1024.477742] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.477780] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.477785] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.477790] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.477795] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.477800] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04AB, 68 bytes at 171[11]:4
[ 1024.477870] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.477883] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.477887] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.477892] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.477897] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.477902] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.477908] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.477912] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.477918] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04AC, 56 bytes at 172[12]:4
[ 1024.477984] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.477995] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.478000] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.478007] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04AD, 56 bytes at 173[13]:4
[ 1024.478075] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.478087] ieee80211 phy0: U iwl_mac_config leave
[ 1024.600135] ieee80211 phy0: U iwl_mac_config enter to channel 136 changed 0x40
[ 1024.600150] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 136 [1]
[ 1024.600163] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.600166] * without RXON_FILTER_ASSOC_MSK
[ 1024.600168] * channel = 136
[ 1024.600171] * bssid = 00:00:00:00:00:00
[ 1024.600178] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.600185] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.600197] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04AE, 48 bytes at 174[14]:4
[ 1024.601323] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.601362] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04AF, 4 bytes at 175[15]:4
[ 1024.601392] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x0d
[ 1024.601437] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.601448] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x0f
[ 1024.601456] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x05
[ 1024.601463] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x07
[ 1024.601471] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x09
[ 1024.601478] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x0b
[ 1024.601486] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 59 dsp  96 rate code 0x01
[ 1024.601494] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x03
[ 1024.601502] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x0a
[ 1024.601510] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x14
[ 1024.601517] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x37
[ 1024.601525] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x6e
[ 1024.601532] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.601539] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.601548] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04B0, 56 bytes at 176[16]:4
[ 1024.601660] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.601681] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.601690] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.601698] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.601704] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.601714] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04B1, 68 bytes at 177[17]:4
[ 1024.601810] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.601827] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.601834] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.601841] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.601848] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.601855] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.601865] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.601871] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.601881] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04B2, 56 bytes at 178[18]:4
[ 1024.601964] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.602004] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.602010] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.602020] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04B3, 56 bytes at 179[19]:4
[ 1024.602103] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.602119] ieee80211 phy0: U iwl_mac_config leave
[ 1024.724078] ieee80211 phy0: U iwl_mac_config enter to channel 140 changed 0x40
[ 1024.724092] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 140 [1]
[ 1024.724106] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.724109] * without RXON_FILTER_ASSOC_MSK
[ 1024.724111] * channel = 140
[ 1024.724113] * bssid = 00:00:00:00:00:00
[ 1024.724120] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.724127] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.724139] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04B4, 48 bytes at 180[20]:4
[ 1024.725244] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.725272] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04B5, 4 bytes at 181[21]:4
[ 1024.725301] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x0d
[ 1024.725346] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.725356] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x0f
[ 1024.725365] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x05
[ 1024.725372] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x07
[ 1024.725380] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x09
[ 1024.725388] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x0b
[ 1024.725395] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 59 dsp  96 rate code 0x01
[ 1024.725403] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x03
[ 1024.725410] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x0a
[ 1024.725418] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x14
[ 1024.725426] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x37
[ 1024.725433] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x6e
[ 1024.725440] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.725447] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.725456] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04B6, 56 bytes at 182[22]:4
[ 1024.725568] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.725591] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.725599] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.725607] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.725613] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.725622] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04B7, 68 bytes at 183[23]:4
[ 1024.725713] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.725731] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.725738] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.725745] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.725753] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.725760] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.725770] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.725776] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.725785] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04B8, 56 bytes at 184[24]:4
[ 1024.725893] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.725910] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.725917] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.725926] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04B9, 56 bytes at 185[25]:4
[ 1024.726007] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.726024] ieee80211 phy0: U iwl_mac_config leave
[ 1024.848091] ieee80211 phy0: U iwl_mac_config enter to channel 1 changed 0x60
[ 1024.848103] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 1 [0]
[ 1024.848117] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.848120] * without RXON_FILTER_ASSOC_MSK
[ 1024.848123] * channel = 1
[ 1024.848125] * bssid = 00:00:00:00:00:00
[ 1024.848133] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.848139] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.848151] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04BA, 48 bytes at 186[26]:4
[ 1024.849440] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.849490] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04BB, 4 bytes at 187[27]:4
[ 1024.849519] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1024.849564] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.849574] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1024.849582] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1024.849589] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1024.849597] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1024.849604] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1024.849612] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1024.849620] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1024.849627] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1024.849635] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1024.849643] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1024.849650] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1024.849657] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.849664] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.849674] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04BC, 56 bytes at 188[28]:4
[ 1024.849766] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.849973] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.849982] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.849989] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.849996] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.850005] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04BD, 68 bytes at 189[29]:4
[ 1024.850094] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.850112] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.850119] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.850126] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.850134] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.850140] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.850148] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.850155] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.850164] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04BE, 56 bytes at 190[30]:4
[ 1024.850248] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.850264] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.850270] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.850280] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04BF, 56 bytes at 191[31]:4
[ 1024.850365] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.850383] ieee80211 phy0: U iwl_mac_config TX Power old=16 new=15
[ 1024.850392] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1024.850399] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1024.850407] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1024.850414] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1024.850422] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1024.850430] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1024.850437] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1024.850445] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1024.850452] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1024.850460] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1024.850468] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1024.850476] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1024.850482] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.850489] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.850498] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04C0, 56 bytes at 192[0]:4
[ 1024.850589] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.850774] ieee80211 phy0: U iwl_mac_config leave
[ 1024.850783] ieee80211 phy0: U iwl_configure_filter Enter: changed: 0x10, total: 0x80000000
[ 1024.850799] ieee80211 phy0: U iwl_mac_config enter to channel 1 changed 0x100
[ 1024.850807] ieee80211 phy0: U iwl_power_sleep_cam_cmd Sleep command for CAM
[ 1024.850815] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1024.850818] * without RXON_FILTER_ASSOC_MSK
[ 1024.850820] * channel = 1
[ 1024.850822] * bssid = 00:00:00:00:00:00
[ 1024.850828] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1024.850835] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1024.850845] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04C1, 48 bytes at 193[1]:4
[ 1024.851094] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1024.851115] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04C2, 4 bytes at 194[2]:4
[ 1024.851142] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1024.851150] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1024.851194] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1024.851227] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1024.851234] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1024.851242] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1024.851250] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1024.851257] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1024.851265] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1024.851272] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1024.851280] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1024.851287] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1024.851295] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1024.851301] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1024.851308] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.851318] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04C3, 56 bytes at 195[3]:4
[ 1024.851410] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1024.851589] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1024.851598] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1024.851605] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1024.851611] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.851620] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04C4, 68 bytes at 196[4]:4
[ 1024.851708] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1024.851725] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1024.851731] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1024.851738] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1024.851745] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1024.851752] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1024.851770] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.851777] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.851786] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04C5, 56 bytes at 197[5]:4
[ 1024.851863] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.851878] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1024.851885] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.851894] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04C6, 56 bytes at 198[6]:4
[ 1024.851966] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1024.854969] ieee80211 phy0: U iwl_mac_config leave
[ 1050.508155] ieee80211 phy0: U iwl3945_hw_reg_txpower_get_temperature Temperature: 145
[ 1050.508165] ieee80211 phy0: U is_temp_calib_needed Getting warmer, delta 1,
[ 1050.508171] ieee80211 phy0: U is_temp_calib_needed Timed thermal calib not needed
[ 1071.276697] ieee80211 phy0: U iwl_mac_config enter to channel 1 changed 0x100
[ 1071.276707] ieee80211 phy0: U iwl_power_sleep_cam_cmd Sleep command for CAM
[ 1071.276720] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.276723] * without RXON_FILTER_ASSOC_MSK
[ 1071.276726] * channel = 1
[ 1071.276727] * bssid = 00:00:00:00:00:00
[ 1071.276735] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.276742] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.276754] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04C7, 48 bytes at 199[7]:4
[ 1071.276939] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.277431] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04C8, 4 bytes at 200[8]:4
[ 1071.277461] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1071.277507] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.277518] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1071.277526] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1071.277534] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1071.277542] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1071.277549] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1071.277557] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1071.277564] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1071.277572] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1071.277580] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1071.277588] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1071.277595] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1071.277602] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.277609] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.277618] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04C9, 56 bytes at 201[9]:4
[ 1071.277739] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.277758] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.277766] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.277773] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.277780] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.277789] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04CA, 68 bytes at 202[10]:4
[ 1071.277876] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.277892] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.277899] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.277906] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.277914] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.277921] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.277930] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.277936] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.277946] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04CB, 56 bytes at 203[11]:4
[ 1071.278028] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.278044] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.278051] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.278060] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04CC, 56 bytes at 204[12]:4
[ 1071.278142] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.278181] ieee80211 phy0: U iwl_mac_config leave
[ 1071.278191] ieee80211 phy0: U iwl_configure_filter Enter: changed: 0x10, total: 0x80000010
[ 1071.404057] ieee80211 phy0: U iwl_mac_config enter to channel 1 changed 0x40
[ 1071.404075] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.404078] * without RXON_FILTER_ASSOC_MSK
[ 1071.404081] * channel = 1
[ 1071.404083] * bssid = 00:00:00:00:00:00
[ 1071.404090] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.404097] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.404109] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04CD, 48 bytes at 205[13]:4
[ 1071.404293] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.404351] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04CE, 4 bytes at 206[14]:4
[ 1071.404381] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1071.404389] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1071.404396] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1071.404404] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1071.404411] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1071.404419] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1071.404427] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.404435] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1071.404442] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1071.404450] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1071.404457] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1071.404464] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1071.404472] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1071.404479] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.404485] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.404494] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04CF, 56 bytes at 207[15]:4
[ 1071.404591] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.404625] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.404633] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.404640] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.404647] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.404656] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04D0, 68 bytes at 208[16]:4
[ 1071.404731] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.404759] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.404766] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.404773] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.404781] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.404788] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.404796] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.404803] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.404812] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04D1, 56 bytes at 209[17]:4
[ 1071.404882] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.404910] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.404917] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.404926] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04D2, 56 bytes at 210[18]:4
[ 1071.404996] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.406106] ieee80211 phy0: U iwl_mac_config leave
[ 1071.433065] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.433084] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.460093] ieee80211 phy0: U iwl_mac_config enter to channel 2 changed 0x40
[ 1071.460105] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 2 [0]
[ 1071.460119] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.460121] * without RXON_FILTER_ASSOC_MSK
[ 1071.460124] * channel = 2
[ 1071.460126] * bssid = 00:00:00:00:00:00
[ 1071.460133] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.460140] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.460152] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04D3, 48 bytes at 211[19]:4
[ 1071.461433] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.461461] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04D4, 4 bytes at 212[20]:4
[ 1071.461490] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 147 dsp  91 rate code 0x0d
[ 1071.461534] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.461568] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 147 dsp  91 rate code 0x0f
[ 1071.461576] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 147 dsp  91 rate code 0x05
[ 1071.461584] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 147 dsp  91 rate code 0x07
[ 1071.461591] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 147 dsp  91 rate code 0x09
[ 1071.461599] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 147 dsp  91 rate code 0x0b
[ 1071.461606] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 147 dsp  91 rate code 0x01
[ 1071.461614] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 235 dsp 121 rate code 0x03
[ 1071.461622] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 203 dsp  96 rate code 0x0a
[ 1071.461629] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 203 dsp  96 rate code 0x14
[ 1071.461637] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 203 dsp  96 rate code 0x37
[ 1071.461644] ieee80211 phy0: U iwl3945_send_tx_power ch 2:1 rf 203 dsp  96 rate code 0x6e
[ 1071.461651] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.461658] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.461668] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04D5, 56 bytes at 213[21]:4
[ 1071.461784] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.461806] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.461815] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.461823] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.461830] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.461839] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04D6, 68 bytes at 214[22]:4
[ 1071.461937] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.461955] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.461961] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.461969] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.461976] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.461983] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.461993] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.461999] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.462008] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04D7, 56 bytes at 215[23]:4
[ 1071.462092] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.462108] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.462115] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.462124] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04D8, 56 bytes at 216[24]:4
[ 1071.462207] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.462223] ieee80211 phy0: U iwl_mac_config leave
[ 1071.488143] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.488168] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.516126] ieee80211 phy0: U iwl_mac_config enter to channel 3 changed 0x40
[ 1071.516134] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 3 [0]
[ 1071.516145] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.516147] * without RXON_FILTER_ASSOC_MSK
[ 1071.516150] * channel = 3
[ 1071.516152] * bssid = 00:00:00:00:00:00
[ 1071.516169] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.516173] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.516180] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04D9, 48 bytes at 217[25]:4
[ 1071.517436] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.517456] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04DA, 4 bytes at 218[26]:4
[ 1071.517488] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 147 dsp  91 rate code 0x0d
[ 1071.517494] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 147 dsp  91 rate code 0x0f
[ 1071.517499] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 147 dsp  91 rate code 0x05
[ 1071.517540] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.517546] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 147 dsp  91 rate code 0x07
[ 1071.517551] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 147 dsp  91 rate code 0x09
[ 1071.517556] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 147 dsp  91 rate code 0x0b
[ 1071.517561] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 147 dsp  91 rate code 0x01
[ 1071.517567] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 235 dsp 121 rate code 0x03
[ 1071.517572] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 203 dsp  96 rate code 0x0a
[ 1071.517577] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 203 dsp  96 rate code 0x14
[ 1071.517582] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 203 dsp  96 rate code 0x37
[ 1071.517587] ieee80211 phy0: U iwl3945_send_tx_power ch 3:1 rf 203 dsp  96 rate code 0x6e
[ 1071.517591] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.517596] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.517602] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04DB, 56 bytes at 219[27]:4
[ 1071.517707] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.517742] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.517747] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.517752] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.517756] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.517762] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04DC, 68 bytes at 220[28]:4
[ 1071.517867] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.517878] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.517883] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.517888] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.517893] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.517897] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.517903] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.517907] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.517914] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04DD, 56 bytes at 221[29]:4
[ 1071.517996] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.518007] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.518012] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.518018] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04DE, 56 bytes at 222[30]:4
[ 1071.518100] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.518111] ieee80211 phy0: U iwl_mac_config leave
[ 1071.544129] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.544139] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.572162] ieee80211 phy0: U iwl_mac_config enter to channel 4 changed 0x40
[ 1071.572174] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 4 [0]
[ 1071.572187] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.572190] * without RXON_FILTER_ASSOC_MSK
[ 1071.572192] * channel = 4
[ 1071.572195] * bssid = 00:00:00:00:00:00
[ 1071.572202] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.572209] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.572221] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04DF, 48 bytes at 223[31]:4
[ 1071.573515] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.573552] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04E0, 4 bytes at 224[0]:4
[ 1071.573582] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 147 dsp  91 rate code 0x0d
[ 1071.573627] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.573637] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 147 dsp  91 rate code 0x0f
[ 1071.573644] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 147 dsp  91 rate code 0x05
[ 1071.573652] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 147 dsp  91 rate code 0x07
[ 1071.573660] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 147 dsp  91 rate code 0x09
[ 1071.573667] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 147 dsp  91 rate code 0x0b
[ 1071.573675] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 147 dsp  91 rate code 0x01
[ 1071.573682] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 235 dsp 121 rate code 0x03
[ 1071.573690] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 203 dsp  96 rate code 0x0a
[ 1071.573698] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 203 dsp  96 rate code 0x14
[ 1071.573705] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 203 dsp  96 rate code 0x37
[ 1071.573713] ieee80211 phy0: U iwl3945_send_tx_power ch 4:1 rf 203 dsp  96 rate code 0x6e
[ 1071.573720] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.573727] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.573736] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04E1, 56 bytes at 225[1]:4
[ 1071.573846] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.573868] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.573877] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.573885] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.573891] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.573901] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04E2, 68 bytes at 226[2]:4
[ 1071.573997] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.574038] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.574045] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.574052] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.574060] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.574067] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.574076] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.574083] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.574092] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04E3, 56 bytes at 227[3]:4
[ 1071.574176] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.574192] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.574199] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.574208] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04E4, 56 bytes at 228[4]:4
[ 1071.574292] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.574308] ieee80211 phy0: U iwl_mac_config leave
[ 1071.600059] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.600073] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.628056] ieee80211 phy0: U iwl_mac_config enter to channel 5 changed 0x40
[ 1071.628069] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 5 [0]
[ 1071.628084] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.628086] * without RXON_FILTER_ASSOC_MSK
[ 1071.628089] * channel = 5
[ 1071.628091] * bssid = 00:00:00:00:00:00
[ 1071.628099] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.628106] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.628118] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04E5, 48 bytes at 229[5]:4
[ 1071.629371] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.629398] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04E6, 4 bytes at 230[6]:4
[ 1071.629428] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 147 dsp  91 rate code 0x0d
[ 1071.629436] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 147 dsp  91 rate code 0x0f
[ 1071.629444] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 147 dsp  91 rate code 0x05
[ 1071.629452] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 147 dsp  91 rate code 0x07
[ 1071.629459] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 147 dsp  91 rate code 0x09
[ 1071.629467] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 147 dsp  91 rate code 0x0b
[ 1071.629474] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.629483] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 147 dsp  91 rate code 0x01
[ 1071.629491] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 235 dsp 121 rate code 0x03
[ 1071.629499] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 203 dsp  96 rate code 0x0a
[ 1071.629506] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 203 dsp  96 rate code 0x14
[ 1071.629514] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 203 dsp  96 rate code 0x37
[ 1071.629522] ieee80211 phy0: U iwl3945_send_tx_power ch 5:1 rf 203 dsp  96 rate code 0x6e
[ 1071.629528] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.629536] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.629546] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04E7, 56 bytes at 231[7]:4
[ 1071.629636] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.629680] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.629689] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.629696] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.629703] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.629712] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04E8, 68 bytes at 232[8]:4
[ 1071.629785] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.629807] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.629814] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.629821] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.629829] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.629835] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.629844] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.629851] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.629861] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04E9, 56 bytes at 233[9]:4
[ 1071.629933] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.629953] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.629960] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.629970] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04EA, 56 bytes at 234[10]:4
[ 1071.630040] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.630064] ieee80211 phy0: U iwl_mac_config leave
[ 1071.657187] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.657202] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.684228] ieee80211 phy0: U iwl_mac_config enter to channel 6 changed 0x40
[ 1071.684240] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 6 [0]
[ 1071.684254] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.684257] * without RXON_FILTER_ASSOC_MSK
[ 1071.684260] * channel = 6
[ 1071.684262] * bssid = 00:00:00:00:00:00
[ 1071.684270] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.684277] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.684289] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04EB, 48 bytes at 235[11]:4
[ 1071.685485] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.685534] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04EC, 4 bytes at 236[12]:4
[ 1071.685566] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 147 dsp  91 rate code 0x0d
[ 1071.685574] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 147 dsp  91 rate code 0x0f
[ 1071.685582] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 147 dsp  91 rate code 0x05
[ 1071.685589] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 147 dsp  91 rate code 0x07
[ 1071.685597] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 147 dsp  91 rate code 0x09
[ 1071.685605] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 147 dsp  91 rate code 0x0b
[ 1071.685612] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.685622] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 147 dsp  91 rate code 0x01
[ 1071.685630] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 235 dsp 121 rate code 0x03
[ 1071.685638] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 203 dsp  96 rate code 0x0a
[ 1071.685646] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 203 dsp  96 rate code 0x14
[ 1071.685653] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 203 dsp  96 rate code 0x37
[ 1071.685661] ieee80211 phy0: U iwl3945_send_tx_power ch 6:1 rf 203 dsp  96 rate code 0x6e
[ 1071.685668] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.685675] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.685684] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04ED, 56 bytes at 237[13]:4
[ 1071.685775] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.685811] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.685819] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.685826] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.685833] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.685842] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04EE, 68 bytes at 238[14]:4
[ 1071.685915] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.685951] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.685957] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.685964] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.685972] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.685979] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.685988] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.685995] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.686004] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04EF, 56 bytes at 239[15]:4
[ 1071.686097] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.686468] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.686476] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.686486] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04F0, 56 bytes at 240[16]:4
[ 1071.686606] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.686635] ieee80211 phy0: U iwl_mac_config leave
[ 1071.713076] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.713095] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.740074] ieee80211 phy0: U iwl_mac_config enter to channel 7 changed 0x40
[ 1071.740087] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 7 [0]
[ 1071.740101] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.740103] * without RXON_FILTER_ASSOC_MSK
[ 1071.740106] * channel = 7
[ 1071.740108] * bssid = 00:00:00:00:00:00
[ 1071.740116] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.740123] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.740135] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04F1, 48 bytes at 241[17]:4
[ 1071.741651] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.742921] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04F2, 4 bytes at 242[18]:4
[ 1071.742952] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 147 dsp  91 rate code 0x0d
[ 1071.742960] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 147 dsp  91 rate code 0x0f
[ 1071.742968] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 147 dsp  91 rate code 0x05
[ 1071.742976] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 147 dsp  91 rate code 0x07
[ 1071.742984] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 147 dsp  91 rate code 0x09
[ 1071.742992] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 147 dsp  91 rate code 0x0b
[ 1071.742999] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.743009] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 147 dsp  91 rate code 0x01
[ 1071.743017] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 235 dsp 121 rate code 0x03
[ 1071.743025] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 203 dsp  96 rate code 0x0a
[ 1071.743032] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 203 dsp  96 rate code 0x14
[ 1071.743040] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 203 dsp  96 rate code 0x37
[ 1071.743048] ieee80211 phy0: U iwl3945_send_tx_power ch 7:1 rf 203 dsp  96 rate code 0x6e
[ 1071.743054] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.743062] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.743071] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04F3, 56 bytes at 243[19]:4
[ 1071.743161] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.743198] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.743207] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.743214] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.743221] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.743230] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04F4, 68 bytes at 244[20]:4
[ 1071.743302] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.743337] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.743344] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.743351] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.743359] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.743366] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.743374] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.743381] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.743390] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04F5, 56 bytes at 245[21]:4
[ 1071.743459] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.743489] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.743495] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.743505] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04F6, 56 bytes at 246[22]:4
[ 1071.743574] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.743604] ieee80211 phy0: U iwl_mac_config leave
[ 1071.769067] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.769082] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.796762] ieee80211 phy0: U iwl_mac_config enter to channel 8 changed 0x40
[ 1071.796774] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 8 [0]
[ 1071.796787] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.796790] * without RXON_FILTER_ASSOC_MSK
[ 1071.796793] * channel = 8
[ 1071.796795] * bssid = 00:00:00:00:00:00
[ 1071.796802] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.796810] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.796821] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04F7, 48 bytes at 247[23]:4
[ 1071.798081] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.798108] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04F8, 4 bytes at 248[24]:4
[ 1071.798137] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 147 dsp  91 rate code 0x0d
[ 1071.798182] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.798217] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 147 dsp  91 rate code 0x0f
[ 1071.798225] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 147 dsp  91 rate code 0x05
[ 1071.798233] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 147 dsp  91 rate code 0x07
[ 1071.798240] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 147 dsp  91 rate code 0x09
[ 1071.798248] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 147 dsp  91 rate code 0x0b
[ 1071.798255] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 147 dsp  91 rate code 0x01
[ 1071.798263] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 235 dsp 121 rate code 0x03
[ 1071.798271] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 203 dsp  96 rate code 0x0a
[ 1071.798278] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 203 dsp  96 rate code 0x14
[ 1071.798286] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 203 dsp  96 rate code 0x37
[ 1071.798293] ieee80211 phy0: U iwl3945_send_tx_power ch 8:1 rf 203 dsp  96 rate code 0x6e
[ 1071.798300] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.798307] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.798316] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04F9, 56 bytes at 249[25]:4
[ 1071.798416] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.798433] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.798441] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.798448] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.798455] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.798464] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04FA, 68 bytes at 250[26]:4
[ 1071.798547] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.798563] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.798570] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.798577] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.798585] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.798592] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.798600] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.798606] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.798616] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04FB, 56 bytes at 251[27]:4
[ 1071.798694] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.798710] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.798716] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.798725] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04FC, 56 bytes at 252[28]:4
[ 1071.798804] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.798819] ieee80211 phy0: U iwl_mac_config leave
[ 1071.824076] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.824096] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.853090] ieee80211 phy0: U iwl_mac_config enter to channel 9 changed 0x40
[ 1071.853102] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 9 [0]
[ 1071.853116] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.853119] * without RXON_FILTER_ASSOC_MSK
[ 1071.853121] * channel = 9
[ 1071.853123] * bssid = 00:00:00:00:00:00
[ 1071.853130] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.853137] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.853150] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04FD, 48 bytes at 253[29]:4
[ 1071.854437] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.854460] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04FE, 4 bytes at 254[30]:4
[ 1071.854489] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 147 dsp  91 rate code 0x0d
[ 1071.854534] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.854544] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 147 dsp  91 rate code 0x0f
[ 1071.854552] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 147 dsp  91 rate code 0x05
[ 1071.854560] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 147 dsp  91 rate code 0x07
[ 1071.854568] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 147 dsp  91 rate code 0x09
[ 1071.854575] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 147 dsp  91 rate code 0x0b
[ 1071.854583] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 147 dsp  91 rate code 0x01
[ 1071.854591] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 235 dsp 121 rate code 0x03
[ 1071.854598] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 203 dsp  96 rate code 0x0a
[ 1071.854606] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 203 dsp  96 rate code 0x14
[ 1071.854613] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 203 dsp  96 rate code 0x37
[ 1071.854621] ieee80211 phy0: U iwl3945_send_tx_power ch 9:1 rf 203 dsp  96 rate code 0x6e
[ 1071.854628] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.854634] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.854644] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04FF, 56 bytes at 255[31]:4
[ 1071.854895] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.854936] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.854944] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.854951] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.854958] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.854967] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0400, 68 bytes at 0[0]:4
[ 1071.855055] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.855072] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.855078] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.855085] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.855093] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.855100] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.855110] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.855116] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.855126] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0401, 56 bytes at 1[1]:4
[ 1071.855209] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.855225] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.855232] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.855241] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0402, 56 bytes at 2[2]:4
[ 1071.855325] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.855341] ieee80211 phy0: U iwl_mac_config leave
[ 1071.882264] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.882285] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.908136] ieee80211 phy0: U iwl_mac_config enter to channel 10 changed 0x40
[ 1071.908147] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 10 [0]
[ 1071.908161] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.908163] * without RXON_FILTER_ASSOC_MSK
[ 1071.908166] * channel = 10
[ 1071.908168] * bssid = 00:00:00:00:00:00
[ 1071.908175] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.908182] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.908194] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0403, 48 bytes at 3[3]:4
[ 1071.909532] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.909569] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0404, 4 bytes at 4[4]:4
[ 1071.909598] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 147 dsp  91 rate code 0x0d
[ 1071.909643] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.909653] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 147 dsp  91 rate code 0x0f
[ 1071.909661] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 147 dsp  91 rate code 0x05
[ 1071.909669] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 147 dsp  91 rate code 0x07
[ 1071.909677] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 147 dsp  91 rate code 0x09
[ 1071.909684] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 147 dsp  91 rate code 0x0b
[ 1071.909692] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 147 dsp  91 rate code 0x01
[ 1071.909700] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 235 dsp 121 rate code 0x03
[ 1071.909708] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 203 dsp  96 rate code 0x0a
[ 1071.909715] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 203 dsp  96 rate code 0x14
[ 1071.909723] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 203 dsp  96 rate code 0x37
[ 1071.909731] ieee80211 phy0: U iwl3945_send_tx_power ch 10:1 rf 203 dsp  96 rate code 0x6e
[ 1071.909738] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.909745] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.909754] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0405, 56 bytes at 5[5]:4
[ 1071.909864] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.909885] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.909894] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.909902] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.909909] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.909918] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0406, 68 bytes at 6[6]:4
[ 1071.910024] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.910068] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.910074] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.910081] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.910089] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.910096] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.910106] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.910112] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.910121] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0407, 56 bytes at 7[7]:4
[ 1071.910206] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.910222] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.910228] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.910237] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0408, 56 bytes at 8[8]:4
[ 1071.910321] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.910337] ieee80211 phy0: U iwl_mac_config leave
[ 1071.936154] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.936172] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1071.964169] ieee80211 phy0: U iwl_mac_config enter to channel 11 changed 0x40
[ 1071.964180] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 11 [0]
[ 1071.964193] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1071.964196] * without RXON_FILTER_ASSOC_MSK
[ 1071.964198] * channel = 11
[ 1071.964200] * bssid = 00:00:00:00:00:00
[ 1071.964208] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1071.964214] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1071.964226] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0409, 48 bytes at 9[9]:4
[ 1071.965576] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1071.965613] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x040A, 4 bytes at 10[10]:4
[ 1071.965643] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 147 dsp  91 rate code 0x0d
[ 1071.965688] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1071.965698] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 147 dsp  91 rate code 0x0f
[ 1071.965705] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 147 dsp  91 rate code 0x05
[ 1071.965713] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 147 dsp  91 rate code 0x07
[ 1071.965721] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 147 dsp  91 rate code 0x09
[ 1071.965729] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 147 dsp  91 rate code 0x0b
[ 1071.965736] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 147 dsp  91 rate code 0x01
[ 1071.965744] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 235 dsp 121 rate code 0x03
[ 1071.965752] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 203 dsp  96 rate code 0x0a
[ 1071.965760] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 203 dsp  96 rate code 0x14
[ 1071.965768] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 203 dsp  96 rate code 0x37
[ 1071.965775] ieee80211 phy0: U iwl3945_send_tx_power ch 11:1 rf 203 dsp  96 rate code 0x6e
[ 1071.965782] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1071.965789] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.965798] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x040B, 56 bytes at 11[11]:4
[ 1071.965908] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1071.965929] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1071.965938] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1071.965946] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1071.965952] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.965962] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x040C, 68 bytes at 12[12]:4
[ 1071.966059] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1071.966077] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1071.966083] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1071.966090] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1071.966098] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1071.966104] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1071.966114] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.966121] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.966130] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x040D, 56 bytes at 13[13]:4
[ 1071.966214] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.966254] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1071.966261] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.966270] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x040E, 56 bytes at 14[14]:4
[ 1071.966353] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1071.966369] ieee80211 phy0: U iwl_mac_config leave
[ 1071.992146] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1071.992159] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1072.020132] ieee80211 phy0: U iwl_mac_config enter to channel 12 changed 0x40
[ 1072.020143] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 12 [0]
[ 1072.020155] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.020158] * without RXON_FILTER_ASSOC_MSK
[ 1072.020160] * channel = 12
[ 1072.020162] * bssid = 00:00:00:00:00:00
[ 1072.020169] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.020176] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.020186] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x040F, 48 bytes at 15[15]:4
[ 1072.021488] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.021525] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0410, 4 bytes at 16[16]:4
[ 1072.021554] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 147 dsp  91 rate code 0x0d
[ 1072.021600] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.021610] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 147 dsp  91 rate code 0x0f
[ 1072.021618] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 147 dsp  91 rate code 0x05
[ 1072.021625] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 147 dsp  91 rate code 0x07
[ 1072.021633] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 147 dsp  91 rate code 0x09
[ 1072.021640] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 147 dsp  91 rate code 0x0b
[ 1072.021648] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 147 dsp  91 rate code 0x01
[ 1072.021655] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 235 dsp 121 rate code 0x03
[ 1072.021663] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 203 dsp  96 rate code 0x0a
[ 1072.021670] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 203 dsp  96 rate code 0x14
[ 1072.021678] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 203 dsp  96 rate code 0x37
[ 1072.021685] ieee80211 phy0: U iwl3945_send_tx_power ch 12:1 rf 203 dsp  96 rate code 0x6e
[ 1072.021692] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.021699] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.021708] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0411, 56 bytes at 17[17]:4
[ 1072.021817] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.021862] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.021870] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.021878] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.021884] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.021893] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0412, 68 bytes at 18[18]:4
[ 1072.021990] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.022007] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.022014] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.022021] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.022028] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.022035] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.022045] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.022051] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.022060] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0413, 56 bytes at 19[19]:4
[ 1072.022144] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.022160] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.022166] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.022175] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0414, 56 bytes at 20[20]:4
[ 1072.022258] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.022275] ieee80211 phy0: U iwl_mac_config leave
[ 1072.144088] ieee80211 phy0: U iwl_mac_config enter to channel 13 changed 0x40
[ 1072.144099] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 13 [0]
[ 1072.144110] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.144112] * without RXON_FILTER_ASSOC_MSK
[ 1072.144113] * channel = 13
[ 1072.144114] * bssid = 00:00:00:00:00:00
[ 1072.144120] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.144125] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.144133] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0415, 48 bytes at 21[21]:4
[ 1072.145355] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.145375] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0416, 4 bytes at 22[22]:4
[ 1072.145397] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 147 dsp  91 rate code 0x0d
[ 1072.145402] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 147 dsp  91 rate code 0x0f
[ 1072.145445] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.145451] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 147 dsp  91 rate code 0x05
[ 1072.145456] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 147 dsp  91 rate code 0x07
[ 1072.145462] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 147 dsp  91 rate code 0x09
[ 1072.145467] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 147 dsp  91 rate code 0x0b
[ 1072.145472] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 147 dsp  91 rate code 0x01
[ 1072.145477] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 235 dsp 121 rate code 0x03
[ 1072.145482] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 203 dsp  96 rate code 0x0a
[ 1072.145487] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 203 dsp  96 rate code 0x14
[ 1072.145493] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 203 dsp  96 rate code 0x37
[ 1072.145498] ieee80211 phy0: U iwl3945_send_tx_power ch 13:1 rf 203 dsp  96 rate code 0x6e
[ 1072.145503] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.145507] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.145514] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0417, 56 bytes at 23[23]:4
[ 1072.145613] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.145625] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.145632] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.145636] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.145641] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.145647] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0418, 68 bytes at 24[24]:4
[ 1072.145728] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.145740] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.145744] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.145749] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.145754] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.145759] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.145766] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.145770] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.145776] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0419, 56 bytes at 25[25]:4
[ 1072.145853] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.145888] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.145892] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.145899] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x041A, 56 bytes at 26[26]:4
[ 1072.145975] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.145986] ieee80211 phy0: U iwl_mac_config leave
[ 1072.268079] ieee80211 phy0: U iwl_mac_config enter to channel 34 changed 0x40
[ 1072.268092] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 34 [1]
[ 1072.268105] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.268108] * without RXON_FILTER_ASSOC_MSK
[ 1072.268110] * channel = 34
[ 1072.268113] * bssid = 00:00:00:00:00:00
[ 1072.268120] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.268127] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.268138] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x041B, 48 bytes at 27[27]:4
[ 1072.269423] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.269450] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x041C, 4 bytes at 28[28]:4
[ 1072.269479] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 27 dsp  92 rate code 0x0d
[ 1072.269524] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.269534] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 27 dsp  92 rate code 0x0f
[ 1072.269541] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 27 dsp  92 rate code 0x05
[ 1072.269549] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 27 dsp  92 rate code 0x07
[ 1072.269556] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 27 dsp  92 rate code 0x09
[ 1072.269563] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 27 dsp  92 rate code 0x0b
[ 1072.269571] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 115 dsp 111 rate code 0x01
[ 1072.269579] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 83 dsp 113 rate code 0x03
[ 1072.269587] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 51 dsp 111 rate code 0x0a
[ 1072.269594] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 51 dsp 111 rate code 0x14
[ 1072.269602] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 51 dsp 111 rate code 0x37
[ 1072.269610] ieee80211 phy0: U iwl3945_send_tx_power ch 34:0 rf 51 dsp 111 rate code 0x6e
[ 1072.269617] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.269624] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.269633] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x041D, 56 bytes at 29[29]:4
[ 1072.269747] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.269770] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.269779] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.269786] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.269793] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.269802] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x041E, 68 bytes at 30[30]:4
[ 1072.269892] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.269910] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.269916] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.269924] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.269931] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.269938] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.269948] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.269955] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.269964] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x041F, 56 bytes at 31[31]:4
[ 1072.270056] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.270073] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.270079] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.270088] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0420, 56 bytes at 32[0]:4
[ 1072.270172] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.270189] ieee80211 phy0: U iwl_mac_config leave
[ 1072.392062] ieee80211 phy0: U iwl_mac_config enter to channel 36 changed 0x40
[ 1072.392072] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 36 [1]
[ 1072.392082] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.392084] * without RXON_FILTER_ASSOC_MSK
[ 1072.392085] * channel = 36
[ 1072.392087] * bssid = 00:00:00:00:00:00
[ 1072.392093] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.392097] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.392105] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0421, 48 bytes at 33[1]:4
[ 1072.393184] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.393238] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0422, 4 bytes at 34[2]:4
[ 1072.393259] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 27 dsp  92 rate code 0x0d
[ 1072.393266] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 27 dsp  92 rate code 0x0f
[ 1072.393311] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.393318] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 27 dsp  92 rate code 0x05
[ 1072.393323] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 27 dsp  92 rate code 0x07
[ 1072.393328] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 27 dsp  92 rate code 0x09
[ 1072.393335] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 27 dsp  92 rate code 0x0b
[ 1072.393342] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 115 dsp 111 rate code 0x01
[ 1072.393349] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 83 dsp 113 rate code 0x03
[ 1072.393356] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 51 dsp 111 rate code 0x0a
[ 1072.393363] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 51 dsp 111 rate code 0x14
[ 1072.393370] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 51 dsp 111 rate code 0x37
[ 1072.393377] ieee80211 phy0: U iwl3945_send_tx_power ch 36:0 rf 51 dsp 111 rate code 0x6e
[ 1072.393384] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.393390] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.393398] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0423, 56 bytes at 35[3]:4
[ 1072.393488] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.393503] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.393511] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.393517] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.393523] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.393531] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0424, 68 bytes at 36[4]:4
[ 1072.393603] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.393620] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.393626] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.393633] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.393639] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.393646] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.393654] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.393660] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.393668] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0425, 56 bytes at 37[5]:4
[ 1072.393735] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.393748] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.393754] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.393762] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0426, 56 bytes at 38[6]:4
[ 1072.393829] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.393843] ieee80211 phy0: U iwl_mac_config leave
[ 1072.420099] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1072.420126] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1072.448140] ieee80211 phy0: U iwl_mac_config enter to channel 38 changed 0x40
[ 1072.448151] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 38 [1]
[ 1072.448164] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.448167] * without RXON_FILTER_ASSOC_MSK
[ 1072.448169] * channel = 38
[ 1072.448171] * bssid = 00:00:00:00:00:00
[ 1072.448179] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.448185] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.448197] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0427, 48 bytes at 39[7]:4
[ 1072.449389] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.449427] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0428, 4 bytes at 40[8]:4
[ 1072.449457] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 27 dsp  92 rate code 0x0d
[ 1072.449502] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.449535] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 27 dsp  92 rate code 0x0f
[ 1072.449543] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 27 dsp  92 rate code 0x05
[ 1072.449550] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 27 dsp  92 rate code 0x07
[ 1072.449557] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 27 dsp  92 rate code 0x09
[ 1072.449565] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 27 dsp  92 rate code 0x0b
[ 1072.449573] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 115 dsp 111 rate code 0x01
[ 1072.449580] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 83 dsp 113 rate code 0x03
[ 1072.449588] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 51 dsp 111 rate code 0x0a
[ 1072.449595] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 51 dsp 111 rate code 0x14
[ 1072.449603] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 51 dsp 111 rate code 0x37
[ 1072.449611] ieee80211 phy0: U iwl3945_send_tx_power ch 38:0 rf 51 dsp 111 rate code 0x6e
[ 1072.449618] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.449624] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.449634] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0429, 56 bytes at 41[9]:4
[ 1072.449746] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.449768] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.449777] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.449785] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.449791] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.449800] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x042A, 68 bytes at 42[10]:4
[ 1072.449897] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.449915] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.449921] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.449928] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.449936] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.449943] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.449953] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.449959] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.449969] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x042B, 56 bytes at 43[11]:4
[ 1072.450052] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.450068] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.450074] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.450083] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x042C, 56 bytes at 44[12]:4
[ 1072.450167] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.450183] ieee80211 phy0: U iwl_mac_config leave
[ 1072.572176] ieee80211 phy0: U iwl_mac_config enter to channel 40 changed 0x40
[ 1072.572190] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 40 [1]
[ 1072.572203] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.572206] * without RXON_FILTER_ASSOC_MSK
[ 1072.572208] * channel = 40
[ 1072.572211] * bssid = 00:00:00:00:00:00
[ 1072.572218] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.572225] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.572237] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x042D, 48 bytes at 45[13]:4
[ 1072.573419] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.573458] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x042E, 4 bytes at 46[14]:4
[ 1072.573487] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 27 dsp  92 rate code 0x0d
[ 1072.573532] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.573542] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 27 dsp  92 rate code 0x0f
[ 1072.573549] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 27 dsp  92 rate code 0x05
[ 1072.573557] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 27 dsp  92 rate code 0x07
[ 1072.573564] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 27 dsp  92 rate code 0x09
[ 1072.573572] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 27 dsp  92 rate code 0x0b
[ 1072.573580] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 115 dsp 111 rate code 0x01
[ 1072.573587] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 83 dsp 113 rate code 0x03
[ 1072.573595] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 51 dsp 111 rate code 0x0a
[ 1072.573603] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 51 dsp 111 rate code 0x14
[ 1072.573611] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 51 dsp 111 rate code 0x37
[ 1072.573618] ieee80211 phy0: U iwl3945_send_tx_power ch 40:0 rf 51 dsp 111 rate code 0x6e
[ 1072.573625] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.573632] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.573642] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x042F, 56 bytes at 47[15]:4
[ 1072.573752] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.573773] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.573782] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.573790] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.573796] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.573806] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0430, 68 bytes at 48[16]:4
[ 1072.573903] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.573944] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.573951] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.573958] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.573966] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.573973] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.573983] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.573990] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.573999] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0431, 56 bytes at 49[17]:4
[ 1072.574083] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.574099] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.574106] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.574115] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0432, 56 bytes at 50[18]:4
[ 1072.574199] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.574215] ieee80211 phy0: U iwl_mac_config leave
[ 1072.600161] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1072.600180] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1072.628147] ieee80211 phy0: U iwl_mac_config enter to channel 42 changed 0x40
[ 1072.628160] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 42 [1]
[ 1072.628173] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.628176] * without RXON_FILTER_ASSOC_MSK
[ 1072.628178] * channel = 42
[ 1072.628180] * bssid = 00:00:00:00:00:00
[ 1072.628188] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.628194] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.628206] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0433, 48 bytes at 51[19]:4
[ 1072.629363] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.629388] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0434, 4 bytes at 52[20]:4
[ 1072.629417] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 27 dsp  92 rate code 0x0d
[ 1072.629425] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 27 dsp  92 rate code 0x0f
[ 1072.629469] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.629503] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 27 dsp  92 rate code 0x05
[ 1072.629511] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 27 dsp  92 rate code 0x07
[ 1072.629518] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 27 dsp  92 rate code 0x09
[ 1072.629525] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 27 dsp  92 rate code 0x0b
[ 1072.629533] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 115 dsp 111 rate code 0x01
[ 1072.629541] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 83 dsp 113 rate code 0x03
[ 1072.629548] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 51 dsp 111 rate code 0x0a
[ 1072.629556] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 51 dsp 111 rate code 0x14
[ 1072.629564] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 51 dsp 111 rate code 0x37
[ 1072.629571] ieee80211 phy0: U iwl3945_send_tx_power ch 42:0 rf 51 dsp 111 rate code 0x6e
[ 1072.629578] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.629585] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.629594] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0435, 56 bytes at 53[21]:4
[ 1072.629704] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.629723] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.629731] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.629738] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.629745] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.629754] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0436, 68 bytes at 54[22]:4
[ 1072.629843] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.629862] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.629868] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.629876] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.629883] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.629890] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.629900] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.629907] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.629916] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0437, 56 bytes at 55[23]:4
[ 1072.630012] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.630406] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.630414] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.630424] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0438, 56 bytes at 56[24]:4
[ 1072.630523] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.630549] ieee80211 phy0: U iwl_mac_config leave
[ 1072.752151] ieee80211 phy0: U iwl_mac_config enter to channel 44 changed 0x40
[ 1072.752165] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 44 [1]
[ 1072.752178] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.752181] * without RXON_FILTER_ASSOC_MSK
[ 1072.752183] * channel = 44
[ 1072.752185] * bssid = 00:00:00:00:00:00
[ 1072.752193] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.752200] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.752212] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0439, 48 bytes at 57[25]:4
[ 1072.753389] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.753416] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x043A, 4 bytes at 58[26]:4
[ 1072.753446] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 27 dsp  92 rate code 0x0d
[ 1072.753490] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.753500] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 27 dsp  92 rate code 0x0f
[ 1072.753508] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 27 dsp  92 rate code 0x05
[ 1072.753515] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 27 dsp  92 rate code 0x07
[ 1072.753523] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 27 dsp  92 rate code 0x09
[ 1072.753530] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 27 dsp  92 rate code 0x0b
[ 1072.753538] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 115 dsp 111 rate code 0x01
[ 1072.753546] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 83 dsp 113 rate code 0x03
[ 1072.753553] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 51 dsp 111 rate code 0x0a
[ 1072.753561] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 51 dsp 111 rate code 0x14
[ 1072.753568] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 51 dsp 111 rate code 0x37
[ 1072.753576] ieee80211 phy0: U iwl3945_send_tx_power ch 44:0 rf 51 dsp 111 rate code 0x6e
[ 1072.753583] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.753590] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.753599] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x043B, 56 bytes at 59[27]:4
[ 1072.753712] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.753733] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.753742] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.753750] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.753756] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.753766] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x043C, 68 bytes at 60[28]:4
[ 1072.753857] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.753899] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.753906] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.753913] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.753920] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.753927] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.753937] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.753943] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.753952] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x043D, 56 bytes at 61[29]:4
[ 1072.754249] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.754267] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.754273] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.754282] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x043E, 56 bytes at 62[30]:4
[ 1072.754366] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.754384] ieee80211 phy0: U iwl_mac_config leave
[ 1072.780198] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1072.780217] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1072.808068] ieee80211 phy0: U iwl_mac_config enter to channel 46 changed 0x40
[ 1072.808081] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 46 [1]
[ 1072.808094] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.808097] * without RXON_FILTER_ASSOC_MSK
[ 1072.808100] * channel = 46
[ 1072.808102] * bssid = 00:00:00:00:00:00
[ 1072.808109] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.808116] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.808127] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x043F, 48 bytes at 63[31]:4
[ 1072.809235] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.809300] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0440, 4 bytes at 64[0]:4
[ 1072.809334] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 27 dsp  98 rate code 0x0d
[ 1072.809342] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 27 dsp  98 rate code 0x0f
[ 1072.809351] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 27 dsp  98 rate code 0x05
[ 1072.809358] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 27 dsp  98 rate code 0x07
[ 1072.809366] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 27 dsp  98 rate code 0x09
[ 1072.809373] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 27 dsp  98 rate code 0x0b
[ 1072.809380] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.809390] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 115 dsp 118 rate code 0x01
[ 1072.809398] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 83 dsp 121 rate code 0x03
[ 1072.809405] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 51 dsp 118 rate code 0x0a
[ 1072.809413] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 51 dsp 118 rate code 0x14
[ 1072.809421] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 51 dsp 118 rate code 0x37
[ 1072.809428] ieee80211 phy0: U iwl3945_send_tx_power ch 46:0 rf 51 dsp 118 rate code 0x6e
[ 1072.809435] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.809443] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.809452] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0441, 56 bytes at 65[1]:4
[ 1072.809553] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.809575] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.809584] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.809591] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.809597] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.809607] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0442, 68 bytes at 66[2]:4
[ 1072.809682] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.809706] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.809713] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.809721] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.809728] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.809735] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.809745] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.809751] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.809761] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0443, 56 bytes at 67[3]:4
[ 1072.809851] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.809869] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.809876] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.809886] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0444, 56 bytes at 68[4]:4
[ 1072.809977] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.809993] ieee80211 phy0: U iwl_mac_config leave
[ 1072.932154] ieee80211 phy0: U iwl_mac_config enter to channel 48 changed 0x40
[ 1072.932168] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 48 [1]
[ 1072.932181] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.932184] * without RXON_FILTER_ASSOC_MSK
[ 1072.932186] * channel = 48
[ 1072.932188] * bssid = 00:00:00:00:00:00
[ 1072.932196] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.932203] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.932214] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0445, 48 bytes at 69[5]:4
[ 1072.933375] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.933426] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0446, 4 bytes at 70[6]:4
[ 1072.933455] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 27 dsp  98 rate code 0x0d
[ 1072.933501] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.933534] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 27 dsp  98 rate code 0x0f
[ 1072.933542] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 27 dsp  98 rate code 0x05
[ 1072.933550] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 27 dsp  98 rate code 0x07
[ 1072.933557] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 27 dsp  98 rate code 0x09
[ 1072.933565] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 27 dsp  98 rate code 0x0b
[ 1072.933573] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 115 dsp 118 rate code 0x01
[ 1072.933581] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 83 dsp 121 rate code 0x03
[ 1072.933589] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 51 dsp 118 rate code 0x0a
[ 1072.933596] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 51 dsp 118 rate code 0x14
[ 1072.933604] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 51 dsp 118 rate code 0x37
[ 1072.933612] ieee80211 phy0: U iwl3945_send_tx_power ch 48:0 rf 51 dsp 118 rate code 0x6e
[ 1072.933619] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.933625] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.933635] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0447, 56 bytes at 71[7]:4
[ 1072.933747] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.933790] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.933799] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.933806] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.933813] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.933822] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0448, 68 bytes at 72[8]:4
[ 1072.933938] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.933955] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.933961] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.933969] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.933976] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.933983] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.933994] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.934000] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.934010] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0449, 56 bytes at 73[9]:4
[ 1072.934094] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.934110] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.934117] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.934126] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x044A, 56 bytes at 74[10]:4
[ 1072.934211] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.934227] ieee80211 phy0: U iwl_mac_config leave
[ 1072.960144] ieee80211 phy0: I iwl3945_mac_tx enter
[ 1072.960169] ieee80211 phy0: I iwl3945_mac_tx leave
[ 1072.988171] ieee80211 phy0: U iwl_mac_config enter to channel 52 changed 0x40
[ 1072.988184] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 52 [1]
[ 1072.988197] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1072.988199] * without RXON_FILTER_ASSOC_MSK
[ 1072.988202] * channel = 52
[ 1072.988204] * bssid = 00:00:00:00:00:00
[ 1072.988211] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1072.988218] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1072.988229] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x044B, 48 bytes at 75[11]:4
[ 1072.989414] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1072.989453] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x044C, 4 bytes at 76[12]:4
[ 1072.989482] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 27 dsp  98 rate code 0x0d
[ 1072.989527] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1072.989537] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 27 dsp  98 rate code 0x0f
[ 1072.989545] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 27 dsp  98 rate code 0x05
[ 1072.989552] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 27 dsp  98 rate code 0x07
[ 1072.989560] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 27 dsp  98 rate code 0x09
[ 1072.989567] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 27 dsp  98 rate code 0x0b
[ 1072.989575] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 115 dsp 118 rate code 0x01
[ 1072.989582] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 83 dsp 121 rate code 0x03
[ 1072.989590] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 51 dsp 118 rate code 0x0a
[ 1072.989598] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 51 dsp 118 rate code 0x14
[ 1072.989605] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 51 dsp 118 rate code 0x37
[ 1072.989613] ieee80211 phy0: U iwl3945_send_tx_power ch 52:0 rf 51 dsp 118 rate code 0x6e
[ 1072.989620] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1072.989627] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.989636] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x044D, 56 bytes at 77[13]:4
[ 1072.989751] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1072.989772] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1072.989781] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1072.989789] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1072.989796] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.989805] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x044E, 68 bytes at 78[14]:4
[ 1072.989902] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1072.989920] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1072.989927] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1072.989934] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1072.989941] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1072.989948] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1072.989958] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.989965] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.989974] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x044F, 56 bytes at 79[15]:4
[ 1072.990058] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.990074] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1072.990080] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.990089] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0450, 56 bytes at 80[16]:4
[ 1072.990173] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1072.990190] ieee80211 phy0: U iwl_mac_config leave
[ 1073.112189] ieee80211 phy0: U iwl_mac_config enter to channel 56 changed 0x40
[ 1073.112202] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 56 [1]
[ 1073.112215] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.112218] * without RXON_FILTER_ASSOC_MSK
[ 1073.112220] * channel = 56
[ 1073.112222] * bssid = 00:00:00:00:00:00
[ 1073.112230] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.112237] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.112249] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0451, 48 bytes at 81[17]:4
[ 1073.113451] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.113512] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0452, 4 bytes at 82[18]:4
[ 1073.113542] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 27 dsp  98 rate code 0x0d
[ 1073.113586] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.113596] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 27 dsp  98 rate code 0x0f
[ 1073.113604] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 27 dsp  98 rate code 0x05
[ 1073.113612] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 27 dsp  98 rate code 0x07
[ 1073.113619] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 27 dsp  98 rate code 0x09
[ 1073.113627] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 27 dsp  98 rate code 0x0b
[ 1073.113635] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 115 dsp 118 rate code 0x01
[ 1073.113642] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 83 dsp 121 rate code 0x03
[ 1073.113650] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 51 dsp 118 rate code 0x0a
[ 1073.113657] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 51 dsp 118 rate code 0x14
[ 1073.113665] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 51 dsp 118 rate code 0x37
[ 1073.113673] ieee80211 phy0: U iwl3945_send_tx_power ch 56:0 rf 51 dsp 118 rate code 0x6e
[ 1073.113680] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.113687] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.113696] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0453, 56 bytes at 83[19]:4
[ 1073.113808] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.113829] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.113838] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.113845] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.113852] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.113861] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0454, 68 bytes at 84[20]:4
[ 1073.113957] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.113975] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.113981] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.113989] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.113996] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.114003] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.114013] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.114019] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.114028] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0455, 56 bytes at 85[21]:4
[ 1073.114112] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.114128] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.114134] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.114144] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0456, 56 bytes at 86[22]:4
[ 1073.114227] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.114244] ieee80211 phy0: U iwl_mac_config leave
[ 1073.236148] ieee80211 phy0: U iwl_mac_config enter to channel 60 changed 0x40
[ 1073.236161] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 60 [1]
[ 1073.236175] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.236178] * without RXON_FILTER_ASSOC_MSK
[ 1073.236180] * channel = 60
[ 1073.236182] * bssid = 00:00:00:00:00:00
[ 1073.236190] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.236196] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.236208] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0457, 48 bytes at 87[23]:4
[ 1073.237392] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.237430] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0458, 4 bytes at 88[24]:4
[ 1073.237460] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 27 dsp  98 rate code 0x0d
[ 1073.237505] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.237515] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 27 dsp  98 rate code 0x0f
[ 1073.237523] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 27 dsp  98 rate code 0x05
[ 1073.237530] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 27 dsp  98 rate code 0x07
[ 1073.237538] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 27 dsp  98 rate code 0x09
[ 1073.237545] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 27 dsp  98 rate code 0x0b
[ 1073.237553] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 115 dsp 118 rate code 0x01
[ 1073.237561] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 83 dsp 121 rate code 0x03
[ 1073.237569] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 51 dsp 118 rate code 0x0a
[ 1073.237576] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 51 dsp 118 rate code 0x14
[ 1073.237584] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 51 dsp 118 rate code 0x37
[ 1073.237591] ieee80211 phy0: U iwl3945_send_tx_power ch 60:0 rf 51 dsp 118 rate code 0x6e
[ 1073.237598] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.237605] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.237614] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0459, 56 bytes at 89[25]:4
[ 1073.237727] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.237749] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.237758] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.237766] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.237772] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.237782] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x045A, 68 bytes at 90[26]:4
[ 1073.237879] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.237897] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.237903] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.237910] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.237918] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.237925] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.237935] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.237942] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.237951] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x045B, 56 bytes at 91[27]:4
[ 1073.238034] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.238050] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.238057] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.238066] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x045C, 56 bytes at 92[28]:4
[ 1073.238150] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.238190] ieee80211 phy0: U iwl_mac_config leave
[ 1073.362355] ieee80211 phy0: U iwl_mac_config enter to channel 64 changed 0x40
[ 1073.362370] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 64 [1]
[ 1073.362384] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.362387] * without RXON_FILTER_ASSOC_MSK
[ 1073.362390] * channel = 64
[ 1073.362392] * bssid = 00:00:00:00:00:00
[ 1073.362400] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.362407] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.362419] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x045D, 48 bytes at 93[29]:4
[ 1073.363517] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.363540] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x045E, 4 bytes at 94[30]:4
[ 1073.363569] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x0d
[ 1073.363614] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.363624] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x0f
[ 1073.363632] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x05
[ 1073.363639] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x07
[ 1073.363647] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x09
[ 1073.363654] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 27 dsp  98 rate code 0x0b
[ 1073.363662] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 115 dsp 118 rate code 0x01
[ 1073.363669] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 83 dsp 121 rate code 0x03
[ 1073.363677] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x0a
[ 1073.363685] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x14
[ 1073.363692] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x37
[ 1073.363700] ieee80211 phy0: U iwl3945_send_tx_power ch 64:0 rf 51 dsp 118 rate code 0x6e
[ 1073.363707] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.363714] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.363723] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x045F, 56 bytes at 95[31]:4
[ 1073.363830] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.363847] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.363856] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.363863] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.363869] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.363878] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0460, 68 bytes at 96[0]:4
[ 1073.363969] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.365110] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.365117] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.365125] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.365133] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.365140] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.365150] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.365157] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.365166] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0461, 56 bytes at 97[1]:4
[ 1073.365238] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.368074] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.368083] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.368094] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0462, 56 bytes at 98[2]:4
[ 1073.368169] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.368494] ieee80211 phy0: U iwl_mac_config leave
[ 1073.488179] ieee80211 phy0: U iwl_mac_config enter to channel 100 changed 0x60
[ 1073.488192] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 100 [1]
[ 1073.488206] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.488209] * without RXON_FILTER_ASSOC_MSK
[ 1073.488211] * channel = 100
[ 1073.488213] * bssid = 00:00:00:00:00:00
[ 1073.488221] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.488228] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.488240] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0463, 48 bytes at 99[3]:4
[ 1073.489432] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.489469] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0464, 4 bytes at 100[4]:4
[ 1073.489498] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0d
[ 1073.489543] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.489578] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0f
[ 1073.489585] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x05
[ 1073.489593] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x07
[ 1073.489601] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x09
[ 1073.489608] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0b
[ 1073.489616] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 27 dsp  98 rate code 0x01
[ 1073.489623] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 111 rate code 0x03
[ 1073.489631] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x0a
[ 1073.489639] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x14
[ 1073.489646] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x37
[ 1073.489654] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x6e
[ 1073.489661] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.489668] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.489677] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0465, 56 bytes at 101[5]:4
[ 1073.489795] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.489818] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.489827] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.489835] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.489841] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.489850] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0466, 68 bytes at 102[6]:4
[ 1073.489948] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.489966] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.489973] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.489980] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.489987] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.489994] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.490004] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.490010] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.490020] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0467, 56 bytes at 103[7]:4
[ 1073.490105] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.490121] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.490128] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.490138] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0468, 56 bytes at 104[8]:4
[ 1073.490222] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.490239] ieee80211 phy0: U iwl_mac_config TX Power old=15 new=16
[ 1073.490248] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0d
[ 1073.490256] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0f
[ 1073.490263] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x05
[ 1073.490271] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x07
[ 1073.490278] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x09
[ 1073.490286] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 59 dsp 118 rate code 0x0b
[ 1073.490293] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 27 dsp  98 rate code 0x01
[ 1073.490300] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 111 rate code 0x03
[ 1073.490308] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x0a
[ 1073.490315] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x14
[ 1073.490323] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x37
[ 1073.490330] ieee80211 phy0: U iwl3945_send_tx_power ch 100:0 rf 115 dsp 104 rate code 0x6e
[ 1073.490337] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.490343] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.490353] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0469, 56 bytes at 105[9]:4
[ 1073.490524] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.490541] ieee80211 phy0: U iwl_mac_config leave
[ 1073.612187] ieee80211 phy0: U iwl_mac_config enter to channel 104 changed 0x40
[ 1073.612201] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 104 [1]
[ 1073.612214] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.612217] * without RXON_FILTER_ASSOC_MSK
[ 1073.612219] * channel = 104
[ 1073.612221] * bssid = 00:00:00:00:00:00
[ 1073.612229] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.612236] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.612248] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x046A, 48 bytes at 106[10]:4
[ 1073.613458] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.613495] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x046B, 4 bytes at 107[11]:4
[ 1073.613526] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x0d
[ 1073.613571] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.613581] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x0f
[ 1073.613589] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x05
[ 1073.613597] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x07
[ 1073.613604] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x09
[ 1073.613612] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 59 dsp 118 rate code 0x0b
[ 1073.613619] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 27 dsp  98 rate code 0x01
[ 1073.613627] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 111 rate code 0x03
[ 1073.613634] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x0a
[ 1073.613642] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x14
[ 1073.613650] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x37
[ 1073.613658] ieee80211 phy0: U iwl3945_send_tx_power ch 104:0 rf 115 dsp 104 rate code 0x6e
[ 1073.613665] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.613672] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.613681] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x046C, 56 bytes at 108[12]:4
[ 1073.613796] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.613842] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.613851] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.613858] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.613865] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.613874] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x046D, 68 bytes at 109[13]:4
[ 1073.613972] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.613989] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.613996] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.614003] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.614010] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.614017] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.614027] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.614033] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.614043] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x046E, 56 bytes at 110[14]:4
[ 1073.614128] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.614144] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.614151] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.614160] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x046F, 56 bytes at 111[15]:4
[ 1073.614243] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.614260] ieee80211 phy0: U iwl_mac_config leave
[ 1073.736162] ieee80211 phy0: U iwl_mac_config enter to channel 108 changed 0x40
[ 1073.736176] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 108 [1]
[ 1073.736190] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.736192] * without RXON_FILTER_ASSOC_MSK
[ 1073.736195] * channel = 108
[ 1073.736197] * bssid = 00:00:00:00:00:00
[ 1073.736204] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.736211] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.736223] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0470, 48 bytes at 112[16]:4
[ 1073.737406] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.737445] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0471, 4 bytes at 113[17]:4
[ 1073.737475] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x0d
[ 1073.737520] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.737529] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x0f
[ 1073.737537] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x05
[ 1073.737545] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x07
[ 1073.737553] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x09
[ 1073.737560] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 59 dsp 118 rate code 0x0b
[ 1073.737568] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 27 dsp  98 rate code 0x01
[ 1073.737575] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 111 rate code 0x03
[ 1073.737583] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x0a
[ 1073.737590] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x14
[ 1073.737598] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x37
[ 1073.737606] ieee80211 phy0: U iwl3945_send_tx_power ch 108:0 rf 115 dsp 104 rate code 0x6e
[ 1073.737613] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.737620] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.737629] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0472, 56 bytes at 114[18]:4
[ 1073.737742] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.737764] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.737773] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.737781] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.737787] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.737796] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0473, 68 bytes at 115[19]:4
[ 1073.737893] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.737911] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.737917] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.737925] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.737933] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.737940] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.737949] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.737956] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.737965] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0474, 56 bytes at 116[20]:4
[ 1073.738050] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.738090] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.738097] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.738106] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0475, 56 bytes at 117[21]:4
[ 1073.738189] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.738206] ieee80211 phy0: U iwl_mac_config leave
[ 1073.860146] ieee80211 phy0: U iwl_mac_config enter to channel 112 changed 0x40
[ 1073.860161] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 112 [1]
[ 1073.860174] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.860177] * without RXON_FILTER_ASSOC_MSK
[ 1073.860179] * channel = 112
[ 1073.860181] * bssid = 00:00:00:00:00:00
[ 1073.860189] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.860196] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.860208] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0476, 48 bytes at 118[22]:4
[ 1073.861384] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.861423] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0477, 4 bytes at 119[23]:4
[ 1073.861452] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x0d
[ 1073.861497] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.861507] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x0f
[ 1073.861515] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x05
[ 1073.861523] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x07
[ 1073.861530] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x09
[ 1073.861537] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 59 dsp 118 rate code 0x0b
[ 1073.861545] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 27 dsp  98 rate code 0x01
[ 1073.861552] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 111 rate code 0x03
[ 1073.861560] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x0a
[ 1073.861567] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x14
[ 1073.861575] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x37
[ 1073.861583] ieee80211 phy0: U iwl3945_send_tx_power ch 112:0 rf 115 dsp 104 rate code 0x6e
[ 1073.861590] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.861597] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.861606] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0478, 56 bytes at 120[24]:4
[ 1073.861717] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.861739] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.861748] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.861756] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.861762] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.861772] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0479, 68 bytes at 121[25]:4
[ 1073.861859] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.862293] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.862300] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.862308] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.862316] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.862323] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.862334] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.862341] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.862351] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x047A, 56 bytes at 122[26]:4
[ 1073.862450] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.862477] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.862483] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.862493] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x047B, 56 bytes at 123[27]:4
[ 1073.862578] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.862597] ieee80211 phy0: U iwl_mac_config leave
[ 1073.984178] ieee80211 phy0: U iwl_mac_config enter to channel 116 changed 0x40
[ 1073.984192] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 116 [1]
[ 1073.984205] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1073.984208] * without RXON_FILTER_ASSOC_MSK
[ 1073.984210] * channel = 116
[ 1073.984213] * bssid = 00:00:00:00:00:00
[ 1073.984220] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1073.984227] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1073.984239] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x047C, 48 bytes at 124[28]:4
[ 1073.985432] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1073.985494] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x047D, 4 bytes at 125[29]:4
[ 1073.985524] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x0d
[ 1073.985569] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1073.985579] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x0f
[ 1073.985587] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x05
[ 1073.985594] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x07
[ 1073.985602] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x09
[ 1073.985609] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 59 dsp 118 rate code 0x0b
[ 1073.985617] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 27 dsp  98 rate code 0x01
[ 1073.985624] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 111 rate code 0x03
[ 1073.985632] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x0a
[ 1073.985639] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x14
[ 1073.985647] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x37
[ 1073.985655] ieee80211 phy0: U iwl3945_send_tx_power ch 116:0 rf 115 dsp 104 rate code 0x6e
[ 1073.985661] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1073.985668] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.985678] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x047E, 56 bytes at 126[30]:4
[ 1073.985791] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1073.985813] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1073.985822] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1073.985829] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1073.985836] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.985846] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x047F, 68 bytes at 127[31]:4
[ 1073.985943] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1073.985960] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1073.985967] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1073.985974] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1073.985982] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1073.985989] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1073.985998] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.986005] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.986015] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0480, 56 bytes at 128[0]:4
[ 1073.986099] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.986115] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1073.986122] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.986131] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0481, 56 bytes at 129[1]:4
[ 1073.986214] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1073.986231] ieee80211 phy0: U iwl_mac_config leave
[ 1074.108179] ieee80211 phy0: U iwl_mac_config enter to channel 120 changed 0x40
[ 1074.108192] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 120 [1]
[ 1074.108205] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.108208] * without RXON_FILTER_ASSOC_MSK
[ 1074.108210] * channel = 120
[ 1074.108213] * bssid = 00:00:00:00:00:00
[ 1074.108220] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.108227] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.108239] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0482, 48 bytes at 130[2]:4
[ 1074.109419] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.109457] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0483, 4 bytes at 131[3]:4
[ 1074.109487] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x0d
[ 1074.109533] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.109542] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x0f
[ 1074.109550] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x05
[ 1074.109558] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x07
[ 1074.109565] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x09
[ 1074.109573] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 123 dsp  92 rate code 0x0b
[ 1074.109581] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 59 dsp  96 rate code 0x01
[ 1074.109588] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x03
[ 1074.109597] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x0a
[ 1074.109605] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x14
[ 1074.109613] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x37
[ 1074.109620] ieee80211 phy0: U iwl3945_send_tx_power ch 120:0 rf 27 dsp  92 rate code 0x6e
[ 1074.109627] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.109634] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.109643] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0484, 56 bytes at 132[4]:4
[ 1074.109755] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.109800] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.109809] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.109817] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.109823] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.109833] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0485, 68 bytes at 133[5]:4
[ 1074.109929] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.109947] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.109953] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.109960] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.109968] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.109975] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.109985] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.109991] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.110001] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0486, 56 bytes at 134[6]:4
[ 1074.110084] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.110100] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.110107] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.110116] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0487, 56 bytes at 135[7]:4
[ 1074.110200] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.110216] ieee80211 phy0: U iwl_mac_config leave
[ 1074.232078] ieee80211 phy0: U iwl_mac_config enter to channel 124 changed 0x40
[ 1074.232090] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 124 [1]
[ 1074.232101] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.232103] * without RXON_FILTER_ASSOC_MSK
[ 1074.232105] * channel = 124
[ 1074.232106] * bssid = 00:00:00:00:00:00
[ 1074.232113] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.232117] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.232126] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0488, 48 bytes at 136[8]:4
[ 1074.233245] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.234369] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0489, 4 bytes at 137[9]:4
[ 1074.234391] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x0d
[ 1074.234397] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x0f
[ 1074.234402] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x05
[ 1074.234408] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x07
[ 1074.234413] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x09
[ 1074.234418] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 123 dsp  92 rate code 0x0b
[ 1074.234424] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 59 dsp  96 rate code 0x01
[ 1074.234429] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x03
[ 1074.234434] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x0a
[ 1074.234439] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x14
[ 1074.234445] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.234452] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x37
[ 1074.234458] ieee80211 phy0: U iwl3945_send_tx_power ch 124:0 rf 27 dsp  92 rate code 0x6e
[ 1074.234462] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.234467] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.234474] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x048A, 56 bytes at 138[10]:4
[ 1074.234562] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.234592] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.234598] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.234603] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.234608] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.234614] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x048B, 68 bytes at 139[11]:4
[ 1074.234683] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.234708] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.234713] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.234717] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.234723] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.234727] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.234733] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.234737] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.234744] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x048C, 56 bytes at 140[12]:4
[ 1074.234809] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.234853] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.234858] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.234864] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x048D, 56 bytes at 141[13]:4
[ 1074.234929] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.234953] ieee80211 phy0: U iwl_mac_config leave
[ 1074.357048] ieee80211 phy0: U iwl_mac_config enter to channel 128 changed 0x40
[ 1074.357059] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 128 [1]
[ 1074.357069] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.357070] * without RXON_FILTER_ASSOC_MSK
[ 1074.357072] * channel = 128
[ 1074.357073] * bssid = 00:00:00:00:00:00
[ 1074.357079] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.357084] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.357092] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x048E, 48 bytes at 142[14]:4
[ 1074.358210] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.358226] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x048F, 4 bytes at 143[15]:4
[ 1074.358245] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x0d
[ 1074.358250] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x0f
[ 1074.358255] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x05
[ 1074.358297] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.358304] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x07
[ 1074.358309] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x09
[ 1074.358314] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 123 dsp  92 rate code 0x0b
[ 1074.358319] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 59 dsp  96 rate code 0x01
[ 1074.358324] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x03
[ 1074.358329] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x0a
[ 1074.358334] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x14
[ 1074.358339] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x37
[ 1074.358344] ieee80211 phy0: U iwl3945_send_tx_power ch 128:0 rf 27 dsp  92 rate code 0x6e
[ 1074.358349] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.358353] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.358360] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0490, 56 bytes at 144[16]:4
[ 1074.358460] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.358472] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.358478] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.358483] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.358487] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.358493] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0491, 68 bytes at 145[17]:4
[ 1074.358572] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.358584] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.358588] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.358593] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.358598] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.358603] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.358609] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.358613] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.358619] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0492, 56 bytes at 146[18]:4
[ 1074.358695] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.358706] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.358711] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.358717] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0493, 56 bytes at 147[19]:4
[ 1074.358793] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.358804] ieee80211 phy0: U iwl_mac_config leave
[ 1074.484046] ieee80211 phy0: U iwl_mac_config enter to channel 132 changed 0x40
[ 1074.484056] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 132 [1]
[ 1074.484066] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.484068] * without RXON_FILTER_ASSOC_MSK
[ 1074.484070] * channel = 132
[ 1074.484071] * bssid = 00:00:00:00:00:00
[ 1074.484076] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.484081] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.484089] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0494, 48 bytes at 148[20]:4
[ 1074.485192] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.485232] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x0495, 4 bytes at 149[21]:4
[ 1074.485251] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x0d
[ 1074.485257] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x0f
[ 1074.485262] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x05
[ 1074.485304] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.485310] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x07
[ 1074.485316] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x09
[ 1074.485321] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 123 dsp  92 rate code 0x0b
[ 1074.485326] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 59 dsp  96 rate code 0x01
[ 1074.485331] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x03
[ 1074.485336] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x0a
[ 1074.485341] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x14
[ 1074.485346] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x37
[ 1074.485351] ieee80211 phy0: U iwl3945_send_tx_power ch 132:0 rf 27 dsp  92 rate code 0x6e
[ 1074.485356] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.485360] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.485367] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x0496, 56 bytes at 150[22]:4
[ 1074.485465] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.485477] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.485483] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.485487] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.485492] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.485498] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x0497, 68 bytes at 151[23]:4
[ 1074.485578] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.485589] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.485594] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.485599] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.485604] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.485608] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.485614] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.485619] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.485625] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0498, 56 bytes at 152[24]:4
[ 1074.485702] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.485713] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.485717] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.485723] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x0499, 56 bytes at 153[25]:4
[ 1074.485799] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.485810] ieee80211 phy0: U iwl_mac_config leave
[ 1074.609055] ieee80211 phy0: U iwl_mac_config enter to channel 136 changed 0x40
[ 1074.609065] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 136 [1]
[ 1074.609075] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.609078] * without RXON_FILTER_ASSOC_MSK
[ 1074.609079] * channel = 136
[ 1074.609081] * bssid = 00:00:00:00:00:00
[ 1074.609086] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.609091] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.609100] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x049A, 48 bytes at 154[26]:4
[ 1074.610185] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.610203] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x049B, 4 bytes at 155[27]:4
[ 1074.610222] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x0d
[ 1074.610228] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x0f
[ 1074.610233] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x05
[ 1074.610274] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.610281] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x07
[ 1074.610286] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x09
[ 1074.610291] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 123 dsp  92 rate code 0x0b
[ 1074.610296] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 59 dsp  96 rate code 0x01
[ 1074.610301] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x03
[ 1074.610306] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x0a
[ 1074.610311] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x14
[ 1074.610316] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x37
[ 1074.610321] ieee80211 phy0: U iwl3945_send_tx_power ch 136:0 rf 27 dsp  92 rate code 0x6e
[ 1074.610326] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.610330] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.610337] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x049C, 56 bytes at 156[28]:4
[ 1074.610433] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.610468] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.610474] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.610478] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.610483] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.610489] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x049D, 68 bytes at 157[29]:4
[ 1074.610564] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.610575] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.610580] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.610585] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.610590] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.610595] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.610600] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.610605] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.610611] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x049E, 56 bytes at 158[30]:4
[ 1074.610682] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.610693] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.610698] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.610704] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x049F, 56 bytes at 159[31]:4
[ 1074.610776] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.610786] ieee80211 phy0: U iwl_mac_config leave
[ 1074.732049] ieee80211 phy0: U iwl_mac_config enter to channel 140 changed 0x40
[ 1074.732059] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 140 [1]
[ 1074.732070] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.732071] * without RXON_FILTER_ASSOC_MSK
[ 1074.732073] * channel = 140
[ 1074.732074] * bssid = 00:00:00:00:00:00
[ 1074.732080] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.732085] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.732093] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04A0, 48 bytes at 160[0]:4
[ 1074.733175] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.733195] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04A1, 4 bytes at 161[1]:4
[ 1074.733218] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x0d
[ 1074.733225] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x0f
[ 1074.733270] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.733276] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x05
[ 1074.733281] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x07
[ 1074.733287] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x09
[ 1074.733294] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 123 dsp  92 rate code 0x0b
[ 1074.733301] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 59 dsp  96 rate code 0x01
[ 1074.733308] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x03
[ 1074.733315] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x0a
[ 1074.733322] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x14
[ 1074.733329] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x37
[ 1074.733336] ieee80211 phy0: U iwl3945_send_tx_power ch 140:0 rf 27 dsp  92 rate code 0x6e
[ 1074.733342] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.733349] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.733357] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04A2, 56 bytes at 162[2]:4
[ 1074.733448] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.733462] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.733469] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.733475] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.733481] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.733490] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04A3, 68 bytes at 163[3]:4
[ 1074.733562] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.733575] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.733581] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.733588] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.733595] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.733602] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.733609] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.733615] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.733624] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04A4, 56 bytes at 164[4]:4
[ 1074.733691] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.733726] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.733733] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.733741] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04A5, 56 bytes at 165[5]:4
[ 1074.733808] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.733820] ieee80211 phy0: U iwl_mac_config leave
[ 1074.856049] ieee80211 phy0: U iwl_mac_config enter to channel 1 changed 0x60
[ 1074.856058] ieee80211 phy0: U iwl_set_rxon_channel Staging channel set to 1 [0]
[ 1074.856067] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.856069] * without RXON_FILTER_ASSOC_MSK
[ 1074.856071] * channel = 1
[ 1074.856072] * bssid = 00:00:00:00:00:00
[ 1074.856078] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.856082] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.856090] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04A6, 48 bytes at 166[6]:4
[ 1074.857351] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.857754] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04A7, 4 bytes at 167[7]:4
[ 1074.857775] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1074.857780] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1074.857785] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1074.857827] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.857834] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1074.857838] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1074.857843] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1074.857847] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1074.857851] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1074.857856] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1074.857861] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1074.857865] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1074.857870] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1074.857874] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.857878] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.857884] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04A8, 56 bytes at 168[8]:4
[ 1074.857974] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.857986] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.857992] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.857996] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.858000] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.858005] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04A9, 68 bytes at 169[9]:4
[ 1074.858485] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.858609] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.858614] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.858619] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.858624] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.858629] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.858634] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.858639] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.858646] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04AA, 56 bytes at 170[10]:4
[ 1074.858713] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.858933] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.858938] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.858945] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04AB, 56 bytes at 171[11]:4
[ 1074.859015] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.859197] ieee80211 phy0: U iwl_mac_config TX Power old=16 new=15
[ 1074.859203] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1074.859208] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1074.859214] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1074.859219] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1074.859224] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1074.859229] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1074.859234] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1074.859239] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1074.859244] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1074.859249] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1074.859254] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1074.859260] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1074.859264] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.859269] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.859275] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04AC, 56 bytes at 172[12]:4
[ 1074.859371] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.859384] ieee80211 phy0: U iwl_mac_config leave
[ 1074.859390] ieee80211 phy0: U iwl_configure_filter Enter: changed: 0x10, total: 0x80000000
[ 1074.859401] ieee80211 phy0: U iwl_mac_config enter to channel 1 changed 0x100
[ 1074.859406] ieee80211 phy0: U iwl_power_sleep_cam_cmd Sleep command for CAM
[ 1074.859413] ieee80211 phy0: U iwl3945_commit_rxon Sending RXON
[ 1074.859414] * without RXON_FILTER_ASSOC_MSK
[ 1074.859416] * channel = 1
[ 1074.859417] * bssid = 00:00:00:00:00:00
[ 1074.859421] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RXON
[ 1074.859425] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RXON 
[ 1074.859432] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x04AD, 48 bytes at 173[13]:4
[ 1074.859659] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RXON 
[ 1074.862172] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_REMOVE_ALL_STA (#1a), seq: 0x04AE, 4 bytes at 174[14]:4
[ 1074.862194] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0d
[ 1074.862199] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0f
[ 1074.862205] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x05
[ 1074.862250] ieee80211 phy0: I iwl_generic_cmd_callback back from REPLY_REMOVE_ALL_STA (0x00000000)
[ 1074.862257] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x07
[ 1074.862263] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x09
[ 1074.862268] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x0b
[ 1074.862273] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 147 dsp  91 rate code 0x01
[ 1074.862278] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 235 dsp 121 rate code 0x03
[ 1074.862283] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x0a
[ 1074.862288] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x14
[ 1074.862293] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x37
[ 1074.862298] ieee80211 phy0: U iwl3945_send_tx_power ch 1:1 rf 203 dsp  96 rate code 0x6e
[ 1074.862303] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_TX_PWR_TABLE_CMD
[ 1074.862308] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.862314] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_TX_PWR_TABLE_CMD (#97), seq: 0x04AF, 56 bytes at 175[15]:4
[ 1074.862402] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_TX_PWR_TABLE_CMD 
[ 1074.864196] ieee80211 phy0: U iwl3945_add_bcast_station Adding broadcast station to station table
[ 1074.864204] ieee80211 phy0: U iwl_add_station Add STA to driver ID 24: ff:ff:ff:ff:ff:ff
[ 1074.864209] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_ADD_STA
[ 1074.864214] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.864221] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_ADD_STA (#18), seq: 0x04B0, 68 bytes at 176[16]:4
[ 1074.864292] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_ADD_STA 
[ 1074.864303] ieee80211 phy0: U iwl_process_add_sta_resp Processing response for adding station 24
[ 1074.864307] ieee80211 phy0: U iwl_process_add_sta_resp REPLY_ADD_STA PASSED
[ 1074.864312] ieee80211 phy0: U iwl_sta_ucode_activate Added STA id 24 addr ff:ff:ff:ff:ff:ff to uCode
[ 1074.864317] ieee80211 phy0: U iwl_process_add_sta_resp Added station id 24 addr ff:ff:ff:ff:ff:ff
[ 1074.864322] ieee80211 phy0: U iwl_process_add_sta_resp Added station according to cmd buffer ff:ff:ff:ff:ff:ff
[ 1074.864328] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.864333] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.864339] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04B1, 56 bytes at 177[17]:4
[ 1074.864406] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.864415] ieee80211 phy0: U iwl_send_cmd_sync Attempting to send sync command REPLY_RATE_SCALE
[ 1074.864419] ieee80211 phy0: U iwl_send_cmd_sync Setting HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.864425] ieee80211 phy0: U iwl_enqueue_hcmd Sending command REPLY_RATE_SCALE (#47), seq: 0x04B2, 56 bytes at 178[18]:4
[ 1074.864489] ieee80211 phy0: I iwl_tx_cmd_complete Clearing HCMD_ACTIVE for command REPLY_RATE_SCALE 
[ 1074.864499] ieee80211 phy0: U iwl_mac_config leave
[ 1110.508135] ieee80211 phy0: U iwl3945_hw_reg_txpower_get_temperature Temperature: 143
[ 1110.508145] ieee80211 phy0: U is_temp_calib_needed Getting cooler, delta -1,
[ 1110.508151] ieee80211 phy0: U is_temp_calib_needed Timed thermal calib not needed