From felixvr@ctv.es Mon Apr 17 13:14:28 2000
From: felixvr@ctv.es
To: users@lists.opensuse.org
Subject: [SLE] Advansys SCSI card & SUSE 6.3
Date: Mon, 17 Apr 2000 15:14:28 +0200
Message-ID: <003501bfa86e$dcd6d940$237c243e@skandia>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============2865498647041065857=="
--===============2865498647041065857==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: quoted-printable
Hi, excuse my poor english.
My problem is that i can not install suse 6.3 because the installation don=C5=
=BDt recognise my SCSI card (an Advansys Ultra Wide, where i have a PLEXTOR 4=
0X & a YAMAHA 6416). I have the Spanish version, and in the manual tells that=
i can use the param: linux advansys=3D0x123 (My SCSI card have the 0xD400 =
i/o address) and i use linux advansys=3D0xD400, but the kernel don=C5=BDt de=
tects any scsi ports or cards, and when the yast2 program have to read the CD=
, tells me that i don=C5=BDt have the CD.
With de 2nd CD (YAST1) i use the drivers options and i select advansys, don=
=C5=BDt put anything in the command line, i push enter and the program detect=
s my SCSI card, my YAMAHA, but not detects the Plextor and moreover the prg. =
hangs (i have to restart the computer).
with Corel linux and Redhat i don=C5=BD=C5=BDt have any problem to detect the=
card and the cd=C5=BDs.
My configuration: Advansys UWide SCSI card (ID7)
YAMAHA 6416 (ID 3)
PLEXTOR 40x (ID 4) with termination ----> i use =
to start the boot cd and install.
In the manual tell that i can create a boot disk with a scsi kernel, that hav=
e to be in the disks dir (using the setup program) or in the suse\images dir.=
But there are not any scsi kernel in these dirs, thought the manual tells th=
at have to be a scsi0x.ikr file.....
thanks you.
Hi, excuse my poor english.
My problem is that i can not install suse 6.3 because the=
=20
installation don=C5=BDt recognise my SCSI card (an Advansys Ultra Wide, where=
i have=20
a PLEXTOR 40X & a YAMAHA 6416). I have the Spanish version, and in the=20
manual tells that i can use the param: linux advansys=3D0x123 (My SCSI=20
card have the 0xD400 i/o address) and i use linux advansys=3D0xD400, but the=
=20
kernel don=C5=BDt detects any scsi ports or cards, and when the yast2 program=
have to=20
read the CD, tells me that i don=C5=BDt have the CD.
With de 2nd CD (YAST1) i use the drivers options and i se=
lect=20
advansys, don=C5=BDt put anything in the command line, i push enter and the p=
rogram=20
detects my SCSI card, my YAMAHA, but not detects the Plextor and moreover the=
=20
prg. hangs (i have to restart the computer).
with Corel linux and Redhat i don=C5=BD=C5=BDt have any p=
roblem to=20
detect the card and the cd=C5=BDs.
My configuration: Advansys UWide SCSI=20
card (ID7)
=20
=20
YAMAHA 6416 (ID 3)
=20
=20
PLEXTOR 40x (ID 4) with termination ----> i use to=20
start the boot cd and install.
In the manual tell that i can create a boot disk with a s=
csi=20
kernel, that have to be in the disks dir (using the setup program) or in the =
suse\images dir. But there are not any scsi kernel in these dirs, thought the=
=20
manual tells that have to be a scsi0x.ikr file.....
thanks you.
--===============2865498647041065857==--
From gaf@gaf.ne.mediaone.net Tue Apr 18 11:03:04 2000
From: gaf@gaf.ne.mediaone.net
To: users@lists.opensuse.org
Subject: Re: [SLE] Advansys SCSI card & SUSE 6.3
Date: Tue, 18 Apr 2000 07:03:04 -0400
Message-ID: <200004181103.HAA02989@gaf.ne.mediaone.net>
In-Reply-To: <003501bfa86e$dcd6d940$237c243e@skandia>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============1961088495353382498=="
--===============1961088495353382498==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: quoted-printable
I have an Advansys SCSI card with a Plextor 8/20 CD-R and an Iomega JAZ. I=20
have not been able to get my system to boot from the CD (after selecting=20
SCSI on the CMOS setup), but it has no problem with the CD after booting=20
the boot diskette. Have you tried loading the Advansys module from the=20
modules diskette?
"Felix" wrote:
> My problem is that i can not install suse 6.3 because the installation =3D
> don=3DB4t recognise my SCSI card (an Advansys Ultra Wide, where i have a =3D
> PLEXTOR 40X & a YAMAHA 6416). I have the Spanish version, and in the =3D
> manual tells that i can use the param: linux advansys=3D3D0x123 (My SCSI =
=3D
> card have the 0xD400 i/o address) and i use linux advansys=3D3D0xD400, =3D
> but the kernel don=3DB4t detects any scsi ports or cards, and when the =3D
> yast2 program have to read the CD, tells me that i don=3DB4t have the CD.
--=20
Jerry Feldman
Boston Linux and Unix user group
http://www.blu.org
--=20
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com =
=20
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
--===============1961088495353382498==--