October 2018 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Leap 15 fails to boot after kernel update today
by David C. Rankin 26 Oct '18

26 Oct '18

All, Last line is Mounted filesystem with ordered data mode Opts: null and the boot hangs. Any ideas? Note, booting prior kernel works just fine, so it is something specific to new -19 kernel that came out in the past day or two. This is running in virtualbox. All prior kernel updates have been just fine. This one completed fine, but as soon as it got to the point of invoking wayland, it just locks. Using Yast to remove the latest kernel solves the problem. Booting with the -16 kernel works great. -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 11

[opensuse] "No ReCAPTCHA response provided" error message
by don fisher 26 Oct '18

26 Oct '18

I tried to join a mailing list and received "No ReCAPTCHA response provided" message. How does one get Thunderbird, or Firefox to return the desired response? I assume it is Thunderbird, since it is a mailing list. Never hit this one before. Don -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

10 35

[opensuse] Filesystem Hierachy - Correct Mount Location
by Paul Groves 26 Oct '18

26 Oct '18

Hi All, I have a single 1TB disk on a server at the moment mounted at root (/). I have run out of space so I have installed a 4TB hard disk along side the existing one. I will name this new disk media so it will be /mount-location/media I am trying to work out the correct location to mount this disk. It will contain data to be server to the network e.g. music and videos. So data will not change often. I though /mnt but that is apparently for temporarily mounted filesystems. perhaps either /var or /srv Where would best practice indicate I should mount this disk? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

11 25

[opensuse] orca ate my CPU and typing speed
by ken 25 Oct '18

25 Oct '18

Since updating the kernel earlier this week, my keyboard has been really slow. I mean I could type faster than the characters would appear onscreen. This happened everywhere, in web pages, in emacs, even at a shell prompt in a terminal window. So finally today I checked some things and found (using "top") that "orca" was using 100% of a CPU (this laptop has 8 CPUs). "orca" was first a child process of "gkrellm" the first time I looked in "ps"; but when I looked (again in "ps") just a couple minutes later, "orca" was a child process of some "de-dup" process. That wasn't the entire name of the "de-dup" process, but only what of it I can remember. So I killed the "orca" process. I haven't noticed anything changing in the functioning of my system... except that my keyboard is now back up to speed; the characters appear onscreen as I type them, as they should. So I can say, "it's fixed." But I was wondering if anyone else has seen this problem. And what the heck is "orca" for...? why do I even need it? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10

[opensuse] IPv6 RDNSS not working 15.0
by James Knott 25 Oct '18

25 Oct '18

I just tried an experiment by turning off the DHCP server on my firewall. This means that DNS info can only be obtained by RDNSS in the router advertisement. With OpenSUSE, while I get an address and domain name, I do not get a DNS server address. With the same computer, running Windows 10, I get a DNS server and host name lookup works fine. RDNSS also works on my Android tablet. Why not on OpenSUSE? Wireshark shows RDNSS is providing the relevant info. tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 6

[opensuse] Strange SCSI problem
by Paul Groves 25 Oct '18

25 Oct '18

Hi all. anyone come across this before? I have the following devices connected to the internal SCSI bus: Adaptec ASC-29320ALP U320 SCSI card. (Termination is on). HP Storageworks Ultrium 448 HP Sotrageworks Ultrium 1760 Built-in Terminator on cable When the server boots the Adaptec BIOS comes up first and scans the SCSI IDs. The problem is, whichever tape drive is the first ID on the SCSI bus. The scanning for IDs gets stuck on this drive for a while, about 2-3 minutes and the tray that takes the tape into the drive goes click click click for about a minute with the drives Ready LED flashing. Eventually it stops flashing and clicking and the SCSI card continues to scan IDs without a problem. When it gets to the second tape drive and so on it doesn't make it go click click flash and wait for ages. If I swap the SCSI ID jumpers over the problem also swaps. As I said it is whatever the lowest SCSI ID number is. Any clue what this might be? When the server boots the tape drives both work fine. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Asus M5A97 EvoR2 and logitech keyboard/mouse wirless with Leap 15. No wake up of USB HID after suspend to disc.
by stakanov 24 Oct '18

24 Oct '18

I have since leap 15 the following problem: The computer goes to sleep, after it is possible only to wake it up with the power button. Fair enough, that is expected. Then, they plasma desktop comes up, but the mouse and the keyboard have any functionality. I tried everything, included to by a ps/2 to usb adapter and try the ps2 support. Nothing. Prior to leap 15, it was straightforward, you would wake up the system that way and all worked like charm. As the system is AMD, I tried also the workaround with amd_iommu=on and immo=soft in boot parameters. No difference, once the system did suspend to disc, no way to get usb support back. I therefore think this is either kde related or kernel related. What did change in Leap 15 in the way it handles usb that makes logitech hardware unusable after a wake up? Thank you for all suggestion. _________________________________________________________________ ________________________________________________________ Ihre E-Mail-Postf�cher sicher & zentral an einem Ort. Jetzt wechseln und alte E-Mail-Adresse mitnehmen! https://www.eclipso.de -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 7

[opensuse] Intel 82574L NIC Problem
by Paul Groves 24 Oct '18

24 Oct '18

Hi all, I am having a major problem on one of my systems with a network controller. The system has the Intel DQ77MK motherboard. This board has dual NICs. The first NIC, an Intel 82574LM works fine and is called eno1 The second NIC, an intel 82574L is the problem. The second NIC is called rename3, or sometimes rename2 / rename6 or rename7 etc.. It keeps changing. Whenever I try to apply any configuration to this NIC it changes name again, therefore I have no network connection. So I change the name in the config and the NIC changes name again. I have never seen a NIC called rename before. What is this trickery?!?!? The system is running ubuntu 18.04. Now I have probably confused you by posting on the OpenSUSE list, but the fact is I have posted on the Ubuntu forum and it has been 4 days and I have had no reply what so ever. It is still Linux after all, so hopefully one of you might be able to assist? Ubuntu 18.04 uses netplan to manage the network configuration. I intend to set up an bond in balance-rr mode as I have done on another system without issue. How can I go about diagnosing this? This is the first time I have every had a NIC not work in any linux distro (apart from broadcom wifi drives cough cough..) so I have literally no in-depth knowledge of networking in linux. so basically... HELP! lol First things I checked: Output of lspci: paul@s34:~$ lspci | grep net 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 03:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection Output of ifconfig: paul@s34:~$ ifconfig -a eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.164 netmask 255.255.255.0 broadcast 192.168.0.255 inet6 fe80::7e05:7ff:fe0f:11c4 prefixlen 64 scopeid 0x20<link> ether 7c:05:07:0f:11:c4 txqueuelen 1000 (Ethernet) RX packets 1049 bytes 106842 (106.8 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 315 bytes 44842 (44.8 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 20 memory 0xf7f00000-f7f20000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 178 bytes 12392 (12.3 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 178 bytes 12392 (12.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 rename9: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 7c:05:07:0f:11:c5 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 18 memory 0xf7e00000-f7e20000 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 28

[opensuse] How to open this broadcast in firewald?
by Carlos E. R. 24 Oct '18

24 Oct '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I get these messages in the firewall log: <0.4> 2018-10-21 22:16:14 Legolas kernel - - - [ 5112.933551] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 <0.4> 2018-10-21 22:16:29 Legolas kernel - - - [ 5128.151646] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 <0.4> 2018-10-21 22:16:44 Legolas kernel - - - [ 5143.203427] FINAL_REJECT: IN=wlan1 OUT= MAC=01:00:5e:00:00:01:f8:8e:85:64:78:f2:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 I understand it is a broadcast from the router, probably trying to find information about the local network. How do I tell the firewalld to accept them? I have no idea. - -- Cheers Carlos E. R. (from 15.0 x86_64 at Legolas) -----BEGIN PGP SIGNATURE----- iHoEARECADoWIQQZEb51mJKK1KpcU/W1MxgcbY1H1QUCW8zfPhwccm9iaW4ubGlz dGFzQHRlbGVmb25pY2EubmV0AAoJELUzGBxtjUfVMoYAnj9WVi0rsqWIbGH+z2An 1xWnZfyhAJ93dOlm5AV+2Ovq3hr8tdJ5z9iXbQ== =S8Mz -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 45

[opensuse] continous access on/spinning up of floppy drive
by Paul Neuwirth 23 Oct '18

23 Oct '18

This is an OpenPGP/MIME signed message (RFC2440, RFC3156). --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: text/plain; charset="utf-8" Content-Disposition: inline; filename="message.txt" Content-Transfer-Encoding: quoted-printable Hello group, I have on several machines this problem: they are continously trying to=20 access the floppy drives. Two drives already defective, due to the=20 mechanic stress. dmesg shows following continously: [1537682.559487] sd 0:0:3:0: [sdc] Read Capacity(10) failed: Result:=20 hostbyte=3DDID_OK driverbyte=3DDRIVER_SENSE [1537682.559496] sd 0:0:3:0: [sdc] Sense Key : Not Ready [current] [1537682.559498] sd 0:0:3:0: [sdc] Add. Sense: Logical unit not ready,=20 cause not reportable [1537682.656688] sd 0:0:3:0: [sdc] Spinning up disk... [1537683.668046]=20 ............................................................................= ..................not=20 responding... [1537783.093938] sd 0:0:3:0: [sdc] Spinning up disk... [1537784.104049]=20 ............................................................................= ..................not=20 responding... this can't be the wanted behaviour for any removable storage devices? Any Hints? Thank you and have a nice weekend --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_= Content-Type: application/pgp-signature Content-Disposition: attachment; filename="signature.asc" -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 Comment: Topal (http://freshmeat.net/projects/topal) iQIcBAEBAgAGBQJaLS66AAoJEIiaa+Y8YDPuZSUP/itt7+QHjNCwX6Wi352+lANf whjep7nBWy6Q0bS2PO/ymWDGiodFkO/AvM+MIitdK4cAm1HCBbMZjKsZYLD3e1LR ZnskqO66VG58TU6lVB1jEXWKlp6OKeb6Ar24SR0YxB4F+ZcbSwZI5w62JEBsozhV X4imcBdO+ztJFSW/hFLeV4WrfrplcTufyL6nw+5TtImrVs62uEg20LYjA//OxlHJ NmXM07A48uVBijRUmMsqeyRMevoKjKop2iICZgKyvTnRtRqx0jbzVeqj+aLqnbaq ncdBnBr7Vr9S86TVGHjIDHPN8Ws8dnufk1GwRTQR+Aj4z58g2r88j/u6o7csTFla vINP3ClCp6MRVbVbEqIYOIvG8NDIVTiwQwXk3CeCf+Be71JbDUMjV9GwVl+X9ksC oNBwwFi+mhHQGJOuX/54HGUEn3lJ1ixQzLimuXTgWmdsb1WoWuG+lNO13NhU+ZVn /IKpcqVjkXikQi9hrmZTUutmrFjJ1QusjnPJQDuBLYB0E/lMWjTpUNmRGw71hrDb uccAYc3sQP6zMuUfEgPWewhMmuTwn1LoQdqYrZ0p1+1z/+w5cB3DOB4JILmbKBUH QUYaDhefxPL1oRBtOxoDAdABJLAfgfKdEE0+g0u6HA67Atioe3HP8MWonrKgs3FC pvU9BHc2k0ASHh7HEsRx =uYfb -----END PGP SIGNATURE----- --=_MIME_CONTENT_BREAK_=_ZVSGRBXMZBOOXUGBRBCHOBMGKKNVGJR_=-- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

17 75