June 2016 - openSUSE Users - openSUSE Mailing Lists

[opensuse] 4K QFHD laptop experience?
by Lew Wolfgang 01 Jul '16

01 Jul '16

Hi Folks, I have a customer who says they need a 17-inch 4K QFHD (3840x2160) laptop. Defer for a minute discussion that this is a wise choice in the first place, does anyone have any experience with Leap working on a 4K display? It would probably have an Nvidia Geforce GTX 98M frame buffer. It would also have 64-GB of RAM. Thanks, Lew -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 5

[opensuse] Encryption in a VM?
by Greg Freemyer 01 Jul '16

01 Jul '16

I'm about to setup a new virtual box VM. I see VB has the ability to encrypt the VM in full, or I can use LUKS to do it at the openSUSE level. I don't want to do both due to paying double the performance hit. Does anyone know the pros / cons of using VB to encrypt vs LUKS? Can both achieve DOD level security? If I go with LUKS, it will be a first for me. Is there a simple write-up of how to do that via the Yast Installer? Thanks Greg -- Greg Freemyer www.IntelligentAvatar.net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 19

[opensuse] KDE4 scribus properties and kcalc windows at the same time
by Istvan Gabor 01 Jul '16

01 Jul '16

Hello: This occurs in openSUSE 13.1 with KDE4. I use scribus and it's properties window. When I start kcalc, the properties window of scribus disappears, get inactivated in the panel task bar. If I activate it clicking it in the panel task bar, kcalc becomes inactivated. I cannot have both in activated mode. How can I fix this? I have to enter into kcalc values I read from scribus properties window. Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 3

[opensuse] Software Updater config question.
by ianseeks 01 Jul '16

01 Jul '16

Hi Is there a way to tell it to check just on login? It only seems to have Daily, weekly or monthly. It does appear to have a time during the day it checks as when i use the login i'm using now, it never checks until later in the day. But with some of the other logins i use later in the day, the updater seems to check as soon as i login. Is it configured to check after 12 noon or something? Regards Ian -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] how to get back the KDE desktop effects?
by Daniel Bauer 01 Jul '16

01 Jul '16

Since today the desktop effects of my KDE don't work anymore, with these stif windows i absolutely have the windows-feling... The effects are checked in the setting, they simply don't work. Wher can I look? What can that be? Please help, thanks! Daniel -- Daniel Bauer photographer Basel Barcelona http://www.daniel-bauer.com room in Barcelona: https://www.airbnb.es/rooms/2416137 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Leap 42.1 Soundcard(s) stopped working.
by Bob Williams 30 Jun '16

30 Jun '16

Problem #1 This is a new machine, built about 3 months ago. The motherboard is an ASUS H170M-E with 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31) built-in sound. Operating system is openSUSE Leap 42.1, fully patched, with KDE5 and pulseaudio. Until a week or so ago, the sound was working OK. I went away, and on my return, it's stopped working. Yast sees the card, configures it as card 0 using the snd_hda_intel driver, but there is no output from test sound or volume settings. I noticed a boot message which says: [2.547611] snd_hda_intel 0000:00:1f.3: no codecs found! What has happened to the codecs, and how can I reinstall them? Problem #2 Because of Problem #1, I added an ASUS Xonar D1 PCI sound card, which had worked in my previous machine, also running openSUSE Leap 42.1, KDE5 and pulseaudio. Yast can see this card, but cannot set it up. The message is: An error occurred during installation of Virtuoso 100 (Xonar D1). The kernel module snd_virtuoso for sound support could not be loaded. This can be caused by incorrect module parameters, including invalid IO or IRQ parameters. I would appreciate a solution to either Problem #1 or #2, if anyone can point me in the right direction. Bob -- Bob Williams System: Linux 4.1.20-11-default Distro: openSUSE 42.1 (x86_64) Desktop: KDE Frameworks: 5.21.0, Qt: 5.5.1 and Plasma:

1 0

Re: [opensuse] leap42.1 - alt-tab not working drives me up the wall
by stakanov＠freenet.de 30 Jun '16

30 Jun '16

-----Ursprüngliche Nachricht----- > Von: Per Jessen > Gesendet: Do. 30.06.2016 17:08 > An: opensuse(a)opensuse.org > Betreff: [opensuse] leap42.1 - alt-tab not working drives me up the wall > > I've more or less made it a habit to work on Leap42.1 for at least 2 > hours a week. For testing (also my patience). Does anyone have an > issue with alt-tab only "sort of" working? Sometimes it is ignored, > sometimes I have to try three times. > > > -- > Per Jessen, Zürich (24.0°C) >http://www.hostsuisse.com/ - dedicated server rental in Switzerland. > > -- > To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org > To contact the owner, e-mail: opensuse+owner(a)opensuse.org > > > > -----Ursprüngliche Nachricht Ende----- I tried this here on my lenovo laptop with Leap 42.1 standard edition. I guess there are two first things you can do as here that works perfectly (at least if your aim is to open a kind of sidebar with which you can conveniently change between open applications. a) you may create a fresh user (if this is a migration) b) you may try another keyboard or set precisely the keyboard you use in kde (provided you are using KDE). c) check if you have attributed in another application that shortcut. I personally would go for a non well working key of the keyboard or for a problem with the cable see the usb hub you are using. So: "works for me" here. Maybe you should share a tiny bit more information about you set-up? I forgot if this is a very recent install, check if the indexing is still running as that can give for the first day some curious issues with the resources (freezing / hopping cursors, non reactive keyboard. So you could try to just switch it off to see if it is this and in case leave it one night working, then problems are over (had this on one machine with an enormous number of small files). --- Mail & Cloud Made in Germany mit 3 GB Speicher! https://email.freenet.de/mail/Uebersicht?epid=e9900000450 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

[opensuse] I mount a disk and systemd umounts it automatically and instantly
by Carlos E. R. 30 Jun '16

30 Jun '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Telcontar:/data # mount -v /data/storage_e mount: /dev/mapper/cr_storage_e mounted on /data/storage_e. Telcontar:/data # mount | grep /data/storage_e Telcontar:/data # Telcontar:/data # systemctl status data-storage_e.mount data-storage_e.mount - /data/storage_e Loaded: loaded (/etc/fstab) Active: inactive (dead) Where: /data/storage_e What: /dev/disk/by-label/e_storage Jun 29 13:27:46 Telcontar systemd[1]: Unmounted /data/storage_e. Jun 29 13:28:56 Telcontar systemd[1]: Unit data-storage_e.mount is bound to inactive service. Stopping, too. Jun 29 13:28:56 Telcontar systemd[1]: Unmounting /data/storage_e... Jun 29 13:28:56 Telcontar systemd[1]: Unmounted /data/storage_e. Jun 29 13:29:02 Telcontar systemd[1]: Unit data-storage_e.mount is bound to inactive service. Stopping, too. Jun 29 13:29:02 Telcontar systemd[1]: Unmounting /data/storage_e... Jun 29 13:29:02 Telcontar systemd[1]: Unmounted /data/storage_e. Jun 29 13:30:06 Telcontar systemd[1]: Unit data-storage_e.mount is bound to inactive service. Stopping, too. Jun 29 13:30:06 Telcontar systemd[1]: Unmounting /data/storage_e... Jun 29 13:30:06 Telcontar systemd[1]: Unmounted /data/storage_e. Telcontar:/data # <0.5> 2016-06-29 13:30:06 Telcontar kernel - - - [1052825.043293] XFS (dm-2): Mounting V4 Filesystem <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** /proc/self/mountinfo changed <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** MOUNTED /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** CHANGING /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** UPDATING /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** EMITTING CHANGED for /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** CHANGED /sys/devices/virtual/block/dm-2 <0.6> 2016-06-29 13:30:06 Telcontar kernel - - - [1052825.139471] XFS (dm-2): Ending clean mount <3.6> 2016-06-29 13:30:06 Telcontar systemd 1 - - Unit data-storage_e.mount is bound to inactive service. Stopping, too. <3.6> 2016-06-29 13:30:06 Telcontar systemd 1 - - Unmounting /data/storage_e... <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** /proc/self/mountinfo changed <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** UNMOUNTED /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** CHANGING /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** UPDATING /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** EMITTING CHANGED for /sys/devices/virtual/block/dm-2 <1.6> 2016-06-29 13:30:06 Telcontar org.freedesktop.UDisks 1154 - - **** CHANGED /sys/devices/virtual/block/dm-2 <3.6> 2016-06-29 13:30:06 Telcontar systemd 1 - - Unmounted /data/storage_e. fstab: /dev/mapper/cr_storage_e /data/storage_e xfs nofail,relatime,noauto 1 5 How can I stop systemd from undoing what I do? I certainly want to mount that disk! - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAldzsyoACgkQtTMYHG2NR9XCaQCcCjiPuIAmOkGptfWUdjE6KwQ5 W4UAnRNbiTOpPyEd+pZGUivClZSDmGbs =KWGh -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 9

RE: [opensuse] Leap 42.1 Security quesiton on konqueror and kmail about POODLE vulnerability
by stakanov＠freenet.de 30 Jun '16

30 Jun '16

> -----Ursprüngliche Nachricht----- > Von: stakanov(a)freenet.de > Gesendet: Do. 30.06.2016 00:06 > An: opensuse , > > > -----Ursprüngliche Nachricht Ende----- This was reported as bug 987158 in bugzilla. --- Alle Postfächer an einem Ort. Jetzt wechseln und E-Mail-Adresse mitnehmen! https://email.freenet.de/mail/Uebersicht?epid=e9900000451 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0

[opensuse] Leap 42.1 Security quesiton on konqueror and kmail about POODLE vulnerability
by stakanov＠freenet.de 29 Jun '16

29 Jun '16

I was on https://www.ssllabs.com/ssltest/viewMyClient.html The site is for testing purposes. As you may notice if you go there with FF or Seamonkey no problem. If you go with Konqueror instead it turns out that the poodle vulnerability for Konqueror is still present in leap. That surprised me a lot. a) how can I deactivate the acceptance of the SSL3 protocol in Leap system wide. b) does this mean it is extremely easy to compromise TLS security of starttls in kmail? Because if this is systemwide, this will hit start TLS too or am I wrong? Should I report a bug or is the problem widely known? Thank you. --- Mail & Cloud Made in Germany mit 3 GB Speicher! https://email.freenet.de/mail/Uebersicht?epid=e9900000450 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 0