February 2016 - openSUSE Users - openSUSE Mailing Lists

Adding fonts?
by Tracer Bullet 22 Aug '16

22 Aug '16

Hi all, Reading some mails on the GIMP mail list, I ran across the procedure to install some more fonts for not only Gimp, but the system and StarOffice to use also. Well, I installed the fonts, went to the shell and issued the command xset fp+ <font directory> and then the rehash command and all fonts are there! Ok, that went well, but each time I restart the system, I have to do it all over again? Is there a way to make it permanent and read the new fonts like it does the ones the system installs or is that a no-no? end of line Tracer Shell commands: xset fp+ <new font directory> xset fp rehash -- ---KMail 1.2--- SuSE Linux v7.2--- Registered Linux User #225206 /tracerb(a)sprintmail.com/ *Magic Page Products* *Team Amiga* http://home.sprintmail.com/~tracerb

3 2

[opensuse] Where is my log message when use with `logger' command
by Billy.Zheng 17 Jun '16

17 Jun '16

>From logger command man: >> logger - a shell command interface to the syslog(3) system log module So, I want to use this command to write log to syslog. following is a test: $: echo 'some special log output' |logger but, i could not found anything about my log in /var/log/. thanks. -- Geek, Rubyist, Emacser Homepage: http://zw963.github.io -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

20 251

[opensuse] network setup in leap 42.1
by Istvan Gabor 16 Jun '16

16 Jun '16

Hello: In openSUSE 13.2 the traditional network setup (ifup in yast) was removed and wicd (??) was introduced which I didn't like when I tried. Along with ifup kinternet/qinternet and related packages, eg smpppd (SuSE Meta PPP Daemon, the back-end for kinternet) have been removed too. I am curious how network manager independent network setup occurs in leap 42.1? Does it have kinternet on something similar? Thanks, Istvan -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 14

[opensuse] Does 13.2+ work with shorewall properly yet? Read about wicked/systemd woes
by cagsm 06 Jun '16

06 Jun '16

Good day, I am trying to find out of shorewall is supposed to work with 13.2 properly, as I read about systemd stuff being in the midst of creation and wicked and sort of that things that make it problematic to run something different from susefirewall2. Thanks for helping. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 20

[opensuse] I can not filter out some systemd messages in syslog
by Carlos E. R. 17 May '16

17 May '16

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have this in "/etc/rsyslog.conf": if ($programname == 'named' or $syslogtag == '[named]:') \ then -/var/log/named & stop ... if ($msg contains 'Started Session' and $msg contains 'of user') \ then -/var/log/systemdpurged & stop # # the rest in one file # *.*;mail.none;news.none -/var/log/messages I get the expected entries in "/var/log/systemdpurged": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Started Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Started Session 94 of user news. But I'm also getting them in "/var/log/messages": <3.6> 2014-03-01 16:30:01 Telcontar systemd 1 - - Starting Session 93 of user cer. <3.6> 2014-03-01 16:33:01 Telcontar systemd 1 - - Starting Session 94 of user news. And they should not be there. So the "stop" line for those systemd entries is not acting. However, it works for other sections, like the "named" section shown above, and others I do not show for clarity. Are systemd entries special? - -- Cheers Carlos E. R. (from 13.1 x86_64 "Bottle" at Telcontar) -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iEYEARECAAYFAlMSADcACgkQtTMYHG2NR9WCgwCdEgnb+Apy47tcjI31Dv5brA9X +TMAoIt87JaGgMoP5Zf11OZM0XevIjif =uI81 -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] USB3 drive not recognized
by Koenraad Lelong 14 Mar '16

14 Mar '16

Hi, I recently purchased a Seagate STDT4000200 Backup Plus Desktop drive. When I boot the laptop with the drive connected, all is fine (AFAICT). But when I boot the laptop without the drive and plug it in later, the drive is not recognized. More, when I shutdown the laptop with the drive plugged in, the laptop does not shutdown fully. Any suggestions where to look for clues ? cat /proc/partitions gives nothing for the drive when plugged in later. journalctl -f is silent when plugging in the drive. Thanks, Koenraad -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 6

[opensuse] thunderbird can't start theme font changer
by buhorojo 11 Mar '16

11 Mar '16

42.1 In tb I installed: Theme Font & Size Changer It doesn't show. I looked under the tools menu. Does anyone have it working? Thanks -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 4

[opensuse] iscsi config screwed up by lio_dump ?
by Per Jessen 08 Mar '16

08 Mar '16

I guess there are not many takers for these questions - anyway: I used targetcli to create/edit my configuration, looked good and I had an initiator connect and run some IO. Then I rebooted the LIO target server and ended up with a partial config being dumped to /etc/target/lio_setup.sh. AFAICT, my saved config in /etc/target/scsi_target.lio is fine, but how do I convert/load that? It looks like json. The targetcli man page on Leap mentions the "clearconfig" command, and the man page on http://linux.die.net also has a "restoreconfig" and "sessions". None of these work in my version of targetcli. I guess it is backlevel? -- Per Jessen, Zürich (5.5°C) http://www.dns24.ch/ - free dynamic DNS, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] Leap42 - which iscsi target to chose?
by Per Jessen 08 Mar '16

08 Mar '16

Andrei Borzenkov wrote: > 07.02.2016 22:20, Per Jessen пишет: >> On 13.1 and earlier, I have installed 'iscsitarget' (ietd), but >> that's not available in Leap 42.1 ? I can't see another iscsi server >> either - can someone point me in the right direction? ISTR >> something about ietd being deprecated in favour of lio, but I can't >> find that either. > > I'm not sure about deprecation, but as far as I understand LIO is > kernel based, so only configuration tools exist. Yes I see that now, thanks. We've been using iscsitarget (http://iscsitarget.sourceforge.net/) for a couple of years, but as I am setting up a new set of storage servers, I wanted to see what else is out there. With 'deprecated' I meant in open/SUSE where we clearly favour LIO/tcm. Hannes Reinecke is active in LIO development, I think. It would also appear that IET/iscsitarget is falling behind featurewise. I found this comparison table, but I can't tell how un/biased it is: http://scst.sourceforge.net/comparison.html It seems that SCST is an IET fork, which appeals to me as we already have IET running. Then I came across a very recent thread on linux-scsi about a proposed LIO/SCST merger, but the LIO and SCST guys don't seem overly friendly to one another. https://www.mail-archive.com/linux-scsi@vger.kernel.org/msg46756.html >From having googled a good few hours, I feel only minimally better informed, but for some reason I tend toward SCST. Both LIO and SCST seem to be backed/sponsored/supported by corporate entities - Datera and Sandisk respectively? This article describes exactly what I intend to build, but neglects to make a recommendation wrt which iscsi target implementation: http://www.nnc3.com/mags/LJ_1994-2014/LJ/217/11275.html Would anyone else care to add their opinions? -- Per Jessen, Zürich (4.3°C) http://www.dns24.ch/ - your free DNS host, made in Switzerland. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 2

[opensuse] leap 42.1 - missing an iscsi target/server?
by Per Jessen 08 Mar '16

08 Mar '16

On 13.1 and earlier, I have installed 'iscsitarget' (ietd), but that's not available in Leap 42.1 ? I can't see another iscsi server either - can someone point me in the right direction? ISTR something about ietd being deprecated in favour of lio, but I can't find that either. There is: lio-mibs - Linux-iSCSI.org Target Userspace utils lio-utils - Linux-iSCSI.org Target Userspace utils yast2-iscsi-lio-server - Configuration of iSCSI LIO target I will also be trying out iscsiuio. but that's only for bnx2 devices afaict. /Per -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 10