April 2013 - openSUSE Users - openSUSE Mailing Lists

[opensuse] LVM: How to get the PV on which a file is located
by Meike Stone 22 Apr '13

22 Apr '13

Hello, I use LVM2 with a VG DATA. In this VG are 3 PV configured. In the VG is one LV configured. Is it possible, to find out on which physical volume a file is located? Thanks Meike -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

3 2

[opensuse] Yast firewall settings don't survive reboot
by lynn 21 Apr '13

21 Apr '13

12.3 zypper up'd today Hi I have disabled firewall using Yast however, each time I reboot, the firewall is always started. I have to go back into Yast and Disable/stop it each boot. What can I do to make the Yast settings 'stick'? Thanks, L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

9 16

[opensuse] systemctl disable nscd
by lynn 21 Apr '13

21 Apr '13

12.3 OK, I give up! nscd is running on a default install, it doesn't appear as a service in yast. I've just done 30 minutes on google on systemd and systemctl. nada. How do I disable nscd at boot time? Just the syntax. If I can get it for this, i may be able to get a few more systemctl commands. Promise I'll not ask any more. L x -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 5

[opensuse] Can't boot with all the memory
by Ciro Iriarte 21 Apr '13

21 Apr '13

Hi, I'm trying to install opensuse 11.2 on a machine running dual Opteron processors with 32GB (kfsn4-dre/sas) and the kernel hangs without any info after scanning disks. I can see that with other distros also, it can boot the installer and even complete installation with mem=4096M but the system won't boot without that. Any ideas of what can be the issue?. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com -- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 7

[opensuse] What Is Release Schedule Of openSUSE ?
by Jesse Palser 19 Apr '13

19 Apr '13

Hi, Running openSUSE 12.3 64Bit KDE and love it. What is release schedule of openSUSE ? (read somewhere it was 8 months, but not sure) In the past I've run Kubuntu but I am happy with openSUSE. Thanks! Jesse -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 7

[opensuse] Compose keys for Unicode?
by Thomas Taylor 19 Apr '13

19 Apr '13

How may a Unicode character be entered using the "compose" keys? The character I want to use is a Greek Capitol Ohmega (Ω) but I haven't found that combination. I have several that I use frequently such as "compose S S" to produce ß or "compose m u" for µ but haven't found the Omega combination. Thanks, Tom -- "We could certainly slow the aging process down if it had to work its way through Congress". - Will Rogers -- Tom Taylor - retired penguin - KG7CFC AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata2 openSUSE 12.2-x86_64 openSUSE 12.3-x86_64 KDE 4.7.2, FF 7.0 KDE 4.10.00, FF 19.0 claws-mail 3.9.1 registered linux user 263467 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQEcBAEBAgAGBQJRWnjBAAoJEHjxEe80vkwITlwIAPb2aBryi1pBNtlTTL87E1cB +71yW5BbhS26IBkqy5o+u/KUdJGEQZ3kFcNn+7IFcTlhUMfmbz17GiVP60g2e9gW D91lvWyTH7CA+1pKoHAMtjK+U6KC9uclnWRObYPHHJjDyLdJBoRDD6r8SYn4fdiD dFRoV9tYhTRJYu170py6DybQ98qHnOe4uOO9Occdv34wXNcylPU4MOaUrFaFIqEF QyUwaQCzkUreLewUb65O/2FkyHZCsYIC+P7rDhTkNOHywb14urwZ7AfQ964dxLj4 Cnnc6LgI4+MFJeB8oxwyCWDC0Jx+DjuF4rhg981aRnqCZYa5HryDAQLD2BkYCZs= =nzdf -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

7 16

[opensuse] Need recommendations ..........
by Duaine Hechler 19 Apr '13

19 Apr '13

for programs to perform maintenance on a postgres database that has "criteria / constraint" links between tables. I'm trying to delete records in the Quasar pg database but it has restriction links between tables and records. TIA, Duaine -- Duaine Hechler Piano, Player Piano, Pump Organ - Tuning, Servicing & Rebuilding (314) 838-5587 /dahechler(a)att.net /www.hechlerpianoandorgan.com Home & Business user of Linux - 13 years -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 1

Re: [opensuse] 12.3 power off issue with multicore?
by Cristian Rodríguez 19 Apr '13

19 Apr '13

On 04/18/2013 02:43 AM, Toshi Esumi wrote: > On Thu, 2013-04-18 at 01:15 -0300, Cristian Rodríguez wrote: > >> Ok, what happends when you issue "poweroff" in the command line as root >> ? does the system turns off ? >> > "poweroff" ends up with the same result. Restarted. > > Toshi > Ok, - has the motherboard manufacturer released any BIOS updates that you have not installed ? - try kernel_head : zypper ar -f -r http://download.opensuse.org/repositories/Kernel:/HEAD/standard/Kernel:HEAD… zypper dup --from Kernel_HEAD - if nothing of that helps, fill a bug report against the kernel. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 4

[opensuse] Allowing multiple protocols in SuSEfirewall2
by James Knott 18 Apr '13

18 Apr '13

I am trying to configure the firewall in 12.3 to allow more than one IPv6 protocol. If I use the example (with the correct address) listed in the file SuSEfirewall2: fd76:9dbb:91a3:1::/64,fd76:9dbb:91a3:4::/64,tcp,ssh" # allow ssh from one IPv6 network to another This works well and the port scan shows port 22 open as expected. However, I'd like to also be able to pass imaps on port 993. Is there any way I can get this to work with more than one protocol. If I add tcp, imaps or just imaps to the line, the IPv6 rule won't load. It also doesn't work if I create separate lines for both ssh and imaps. BTW, I'm using this as part of a FW_FORWARD statement, as this allows access to my network. Any ideas? tnx jk -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

1 1

[opensuse] Broken perl?
by Bob Williams 18 Apr '13

18 Apr '13

Hi, For years I have run a weekly perl script that checks the integrity of some files (md5checksum comparisons), and then mails me a reassuring message. Today I got the following error message: *** Error in `/usr/bin/perl': double free or corruption (!prev): 0x000000000209fdd0 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x7abf6)[0x7f35724efbf6] /lib64/libc.so.6(+0x7b973)[0x7f35724f0973] /usr/bin/perl(Perl_av_extend+0x1ed)[0x49ce5d] /usr/bin/perl(Perl_stack_grow+0x22)[0x4d2d72] /usr/bin/perl(Perl_pp_gv+0x24)[0x49f654] /usr/bin/perl(Perl_runops_standard+0x16)[0x49ee16] /usr/bin/perl(perl_run+0x402)[0x43cbb2] /usr/bin/perl(main+0x11b)[0x41ec5b] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f3572496a15] /usr/bin/perl[0x41ec95] ======= Memory map: ======== 00400000-00571000 r-xp 00000000 08:07 10853 /usr/bin/perl 00770000-00771000 r--p 00170000 08:07 10853 /usr/bin/perl 00771000-00776000 rw-p 00171000 08:07 10853 /usr/bin/perl 017cf000-0245d000 rw-p 00000000 00:00 0 [heap] 7f3572058000-7f357206d000 r-xp 00000000 08:07 785018 /lib64/libgcc_s.so.1 7f357206d000-7f357226c000 ---p 00015000 08:07 785018 /lib64/libgcc_s.so.1 7f357226c000-7f357226d000 r--p 00014000 08:07 785018 /lib64/libgcc_s.so.1 7f357226d000-7f357226e000 rw-p 00015000 08:07 785018 /lib64/libgcc_s.so.1 7f357226e000-7f3572274000 r-xp 00000000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572274000-7f3572473000 ---p 00006000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572473000-7f3572474000 r--p 00005000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572474000-7f3572475000 rw-p 00006000 08:07 1839943 /usr/lib/perl5/5.16.2/x86_64-linux-thread-multi/auto/File/Glob/Glob.so 7f3572475000-7f3572618000 r-xp 00000000 08:07 784908 /lib64/libc-2.17.so 7f3572618000-7f3572818000 ---p 001a3000 08:07 784908 /lib64/libc-2.17.so 7f3572818000-7f357281c000 r--p 001a3000 08:07 784908 /lib64/libc-2.17.so 7f357281c000-7f357281e000 rw-p 001a7000 08:07 784908 /lib64/libc-2.17.so 7f357281e000-7f3572822000 rw-p 00000000 00:00 0 7f3572822000-7f3572839000 r-xp 00000000 08:07 784934 /lib64/libpthread-2.17.so 7f3572839000-7f3572a38000 ---p 00017000 08:07 784934 /lib64/libpthread-2.17.so 7f3572a38000-7f3572a39000 r--p 00016000 08:07 784934 /lib64/libpthread-2.17.so 7f3572a39000-7f3572a3a000 rw-p 00017000 08:07 784934 /lib64/libpthread-2.17.so 7f3572a3a000-7f3572a3e000 rw-p 00000000 00:00 0 7f3572a3e000-7f3572a4a000 r-xp 00000000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572a4a000-7f3572c4a000 ---p 0000c000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572c4a000-7f3572c4b000 r--p 0000c000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572c4b000-7f3572c4c000 rw-p 0000d000 08:07 784912 /lib64/libcrypt-2.17.so 7f3572c4c000-7f3572c7a000 rw-p 00000000 00:00 0 7f3572c7a000-7f3572c7d000 r-xp 00000000 08:07 784914 /lib64/libdl-2.17.so 7f3572c7d000-7f3572e7c000 ---p 00003000 08:07 784914 /lib64/libdl-2.17.so 7f3572e7c000-7f3572e7d000 r--p 00002000 08:07 784914 /lib64/libdl-2.17.so 7f3572e7d000-7f3572e7e000 rw-p 00003000 08:07 784914 /lib64/libdl-2.17.so 7f3572e7e000-7f3572f7b000 r-xp 00000000 08:07 784916 /lib64/libm-2.17.so 7f3572f7b000-7f357317a000 ---p 000fd000 08:07 784916 /lib64/libm-2.17.so 7f357317a000-7f357317b000 r--p 000fc000 08:07 784916 /lib64/libm-2.17.so 7f357317b000-7f357317c000 rw-p 000fd000 08:07 784916 /lib64/libm-2.17.so 7f357317c000-7f357319d000 r-xp 00000000 08:07 784901 /lib64/ld-2.17.so 7f3573379000-7f357337d000 rw-p 00000000 00:00 0 7f357339b000-7f357339d000 rw-p 00000000 00:00 0 7f357339d000-7f357339e000 r--p 00021000 08:07 784901 /lib64/ld-2.17.so 7f357339e000-7f357339f000 rw-p 00022000 08:07 784901 /lib64/ld-2.17.so 7f357339f000-7f35733a0000 rw-p 00000000 00:00 0 7ffff3607000-7ffff3628000 rw-p 00000000 00:00 0 [stack] 7ffff371c000-7ffff371d000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] The script hasn't changed, so it must be due to a recent 'upgrade' to perl. /lib64/libc.so.6 is a symlink to libc-2.17.so which is also in /lib64/ Where should I start trying to solve this problem? Bob -- Bob Williams System: Linux 3.7.10-1.1-desktop Distro: openSUSE 12.3 (x86_64) with KDE Development Platform: 4.10.1 "release 545" Uptime: 06:00am up 1 day 16:20, 3 users, load average: 0.24, 0.14, 0.14 -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 8