April 2012 - openSUSE Users - openSUSE Mailing Lists

[opensuse] Android print solution?
by David C. Rankin 15 Jul '13

15 Jul '13

Guys, With the iphone we were able to configure good print function via CUPS/Avahi, is there anything similar that can be done with an Android tablet? Looking, it doesn't appear that there is any basic print capability provided by Android (3.2 Honeycomb). I would like to print to by openSuSE server in the same manner I do from iOS. Anybody found a good solution? I have found PrintBot, but that isn't a solution because it cannot be used legally where confidentiality is required. (data is transferred to a 3rd party server before printing). I need to find a direct print solution. What says the braintrust? -- David C. Rankin, J.D.,P.E. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

8 15

[opensuse] Still wanting to upgrade to 12.1 ..............
by Duaine Hechler 13 Aug '12

13 Aug '12

with the following conditions fixed. I would like to here from persons that have had these problems fixed. - Can't get my MB sound card to work (Intel ICH7) consistent. - alsasound will not stay "yes" in the system service levels. - rcalsasound or alsactl reports (alsa) "inactive" - and - can't get it active. - Can't get my display to stay at 1024x768 - Can't get rid of the "Nepomuk Indexing Disabled) popups TIA, Duaine -- Duaine Hechler Piano, Player Piano, Pump Organ Tuning, Servicing& Rebuilding Reed Organ Society Member Florissant, MO 63034 (314) 838-5587 dahechler(a)att.net www.hechlerpianoandorgan.com -- Home& Business user of Linux - 11 years -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

14 82

[opensuse] virtualbox in 11.4 with kde3
by kanenas＠hawaii.rr.com 14 Jul '12

14 Jul '12

ok, been playing w. 11.4, but i have installed kde-3:) .(just some personal issues with widgets and plasmoids, please don't attack:)) the only problem so far is virtual box, it fails to start. rerunning setup does reconfigure it, still it fails to open an x window. any pointers? thanks, d. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse+help(a)opensuse.org

6 7

[opensuse] OpenSuSE 12.1: connect-debounce error
by Peter Maffter 13 Jul '12

13 Jul '12

I am still testing my new machine. First I had problems with the fake raid of my AsrockZ68 Extreme4 Gen3: OpenSuSE 11.4 was not able to handle this in RAID1 mode. I switched to OpenSuSE 11.3 which worked. But I still wanted a new version of SuSE so I tried 12.1 a few days ago. There was a huge problem with Systemd and RAID mechanism which gave me the impression that this part is far too immature to be used. This view of mine is confirmed by the many problems of systemd that can be read on the internet. I switched back to SysV initialization instead of Systemd. SysV works now. But both initialization methods show an error: "<3>[ 4.722529] hub 1-1:1.0: connect-debounce failed, port 1 disabled" This was not shown when booting SuSE 11.3 so I wonder why SuSE 12.1 fills up the logfile with that message: "... Feb 10 10:07:53 linux-wc9i kernel: [ 246.401407] hub 1-1:1.0: connect-debounce failed, port 1 disabled Feb 10 10:07:55 linux-wc9i kernel: [ 248.441347] hub 1-1:1.0: connect-debounce failed, port 1 disabled Feb 10 10:07:57 linux-wc9i kernel: [ 250.489279] hub 1-1:1.0: connect-debounce failed, port 1 disabled Feb 10 10:07:59 linux-wc9i kernel: [ 252.537238] hub 1-1:1.0: connect-debounce failed, port 1 disabled Feb 10 10:08:01 linux-wc9i kernel: [ 254.585179] hub 1-1:1.0: connect-debounce failed, port 1 disabled Feb 10 10:08:03 linux-wc9i kernel: [ 256.633113] hub 1-1:1.0: connect-debounce failed, port 1 disabled Feb 10 10:08:05 linux-wc9i kernel: [ 258.677047] hub 1-1:1.0: connect-debounce failed, port 1 disabled Feb 10 10:08:07 linux-wc9i kernel: [ 260.724980] hub 1-1:1.0: connect-debounce failed, port 1 disabled ..." :-( All USB ports seem to work and accept e.g. USB sticks. USB ports are ok as far as I can see. No hardware was changed between 11.3 and 12.1. Luckily I have the boot.msg from 11.3 and there are differences when detecting USB: SuSE 12.1: <6>[ 2.110478] hub 1-0:1.0: 2 ports detected ... <6>[ 2.130475] hub 2-0:1.0: 2 ports detected .... <6>[ 2.555082] hub 1-1:1.0: 6 ports detected <===this one shows the debounce later on ... <6>[ 2.799073] hub 2-1:1.0: 8 ports detected .. <6>[ 6.116515] hub 3-0:1.0: 2 ports detected ... <6>[ 6.116672] hub 4-0:1.0: 2 ports detected ... <6>[ 6.117044] hub 5-0:1.0: 2 ports detected ... <6>[ 6.117148] hub 6-0:1.0: 2 ports detected SuSE 11.3 detects USB different and showed no error: <6>[ 1.066475] hub 1-0:1.0: 2 ports detected ... <6>[ 1.080467] hub 2-0:1.0: 2 ports detected ... <6>[ 1.459873] hub 1-1:1.0: 6 ports detected ... <6>[ 1.678075] hub 2-1:1.0: 8 ports detected ... <6>[ 4.443160] hub 3-0:1.0: 4 ports detected ... <6>[ 4.443582] hub 4-0:1.0: 4 ports detected Is there a bug in the USB detection of SuSE 12.1? How can I correct this? -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

2 5

[opensuse] Problem with acroread 9.4.7-3.7.1 and libpango
by Peter Maffter 24 Jun '12

24 Jun '12

Hello, I tried to install acroread 9.4.7-3.7.1 on my OpenSuSE 12.1 64Bit and get the following error message: "nothing provides libpango-1.0.so.0 needed by acroread..." See here: http://www.imagebanana.com/view/qfa95ncy/acroreadlibpangoproblem.png libpango is installed but as libpango-1_0-0 Does the underscore make a problem here? How can I install acroread on my OpenSuSE 12.1 64bit? Thanks in advance. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

6 14

[opensuse] Problem upgrade OpenSuSE 11.3 to 12.1
by claudioml＠mediaservice.net 25 May '12

25 May '12

Hello all, I have a problem with an upgrade, from OpenSuSE 11.3 to 12.1. On the old version of the distro, the hard disk devices are listed as /dev/cciss/etc., into the new release are listed as /dev/sd[x]. The problem is the upgrade don't see the older partition (Install from DVD), and don't see any SuSE to Upgrade. What can be the right manner to solve this situation, and upgrade to OpenSuSE 12.1 without re-installing all? Cordially, Claudio Prono. -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 7

[opensuse] inittab Faxgetty
by Steven 24 May '12

24 May '12

I have upgraded my Hylafax server to 12.1. Installed Hylafax works fine. But i can't get the faxgetty to work in the /etc/inittab file. I have tried : mo:2345:respawn:/usr/lib/fax/faxgetty /dev/ttyS0 mo:35:respawn:/usr/lib/fax/faxgetty /dev/ttyS0 and even: mo:35:respawn:/usr/lib/fax/faxgetty ttyS0 mo:2345:respawn:/usr/lib/fax/faxgetty ttyS0 modem will not respawn after after reboot. If i run: usr/lib/faxgetty -D ttyS0 Modem works fine until I reboot. Then I tried: I created a file /etc/systemd/system/faxgetty-ttyS0.service [Unit] Description=HylaFAX faxgetty for ttyS0 [Service] User=root Group=root Restart=always RestartSec=30 ExecStart=/usr/lib/fax/faxgetty /dev/ttyS0 [Install] WantedBy=multi-user.target Then in terminal I issued 'systemctl start faxgetty-ttyS0.service' Modem starts respawns great. Reboot and modem still dead. Any help would very appreciated. Steven -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

5 12

[opensuse] Upgrading the BIOS
by Basil Chupin 18 May '12

18 May '12

Yesterday I picked up from the store all the bits from which to create a new magical computer - which I will be so doing in the next 12 hours or so. There is an upgrade available to the BIOS on the motherboard - which the installation instructions suggest be done. However, the darn upgrade file is an *.exe file. I have "unarched" this file and it contains a *bat, an *exe and the actual BIOS upgrade file. I have never applied a BIOS upgrade while using Linux, and the last time I did apply a BIOS upgrade was some 9 years ago under XP. The question therefore is: how do I apply this BIOS upgrade when I install openSUSE (12.1)? Thanks for any hints/comments. BC -- A lie gets halfway around the world before the truth has a chance to get its pants on. Sir Winston Churchill -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

16 23

[opensuse] Brother MFC-J6710dw compatibility?
by Thomas Taylor 09 May '12

09 May '12

Hi All ;) Have any of you used a Brother MFC-J6710dw with linux? Have there been any problems with recognition/setup? This is a fairly new printer and I couldn't find it on the HCL so am asking here. Thanks, Tom -- Tom Taylor - retired penguin AMD Phenom II x4 955 -- 4GB RAM -- 2x1.5TB sata3 openSUSE 12.1x86_64 openSUSE 12.2x86_64 KDE 4.6.00, FF 7.0 KDE 4.7.2, FF 10.0 claws-mail 3.8.0 registered linux user 263467 linxt-At-comcast-DoT-net -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

4 12

[opensuse] Video ideas?
by James Hatridge 03 May '12

03 May '12

Hi all, I want to do a slideshow with a voiceover and some titles. What I'm thinking is show a German stamp and I explain what it is, ie who is on it etc. Then upload it to youtube so that my customers know what the new stamps are. Can someone suggest a good program to do this with? Thanks! JIM -- Check out my stamp & postcard collection! Yankee GO HOME! Anti-US Propaganda on stamps, postcards, envelopes, and labels http://yankeegohome.18-t.com/ Check out my online Delcampe store http://www.delcampe.net/stores/warthogbulletin -- To unsubscribe, e-mail: opensuse+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse+owner(a)opensuse.org

15 28