August 2003 - openSUSE Users - openSUSE Mailing Lists

Empty messages
by Mike 01 Sep '03

01 Sep '03

I'm using K-mail and the other day I recieved an e-mail that seemed to be nothing but a header. I was reading the SuSE-E list today and found the same thing agian. I was able to read the message by having the sender try my other address which used pine. This is the header from the list ---------------------------------------------------- from the list ------- Return-Path: <suse-linux-e-return-157802-******************.ca(a)suse.com> Received: from lists.suse.com ([217.9.113.69]) by tomts25-srv.bellnexxia.net (InterMail vM.5.01.06.04 201-253-122-130-104-20030726) with SMTP id <20030830223501.HBDV15001.tomts25-srv.bellnexxia.net(a)lists.suse.com> for <*******(a)sympatico.ca>; Sat, 30 Aug 2003 18:35:01 -0400 Received: (qmail 27547 invoked by alias); 30 Aug 2003 22:34:44 -0000 Mailing-List: contact suse-linux-e-help(a)suse.com; run by ezmlm Precedence: bulk list-help: <mailto:suse-linux-e-help@suse.com> list-unsubscribe: <mailto:suse-linux-e-unsubscribe-*******=sympatico.ca@suse.com> list-post: <mailto:suse-linux-e@suse.com> X-MIME-Notice: attachments may have been removed from this message X-Mailinglist: suse-linux-e X-Message-Number-for-archive: 157802 Delivered-To: mailing list suse-linux-e(a)suse.com Received: (qmail 27533 invoked from network); 30 Aug 2003 22:34:43 -0000 From: **** ***** <*****(a)****.**> Organization: B P Mowing To: suse-linux-e(a)suse.com Date: Sat, 30 Aug 2003 11:51:23 -1100 User-Agent: KMail/1.5.1 References: <200308292219.45452.******(a)niue.nu> <200308301057.26799.******(a)niue.nu> <3F511CD3.1030005(a)a**********.de> In-Reply-To: <3F511CD3.1030005(a)a**********.de> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200308301151.23413.******(a)niue.nu> X-Spam-Processed: niue.nu, Sat, 30 Aug 2003 11:34:13 -1100 (not: message from valid local sender) Status: R X-Status: N ---------------------------------------------------- from the list ------- The original post looked like this: ================================================= original e-mail ====== Return-Path: <jim(a)********.com> Received: from ********.com ([24.91.87.29]) by tomts6-srv.bellnexxia.net (InterMail vM.5.01.06.04 201-253-122-130-104-20030726) with ESMTP id <20030829131809.YUFR24609.tomts6-srv.bellnexxia.net(a)********.com> for <*******(a)sympatico.ca>; Fri, 29 Aug 2003 09:18:09 -0400 Received: from asa (authenticated user jim(a)********.com) by ********.com (MDaemon.PRO.v6.8.4.R) with ESMTP id 11-md50000000028.tmp for: 18:06 -0400 Message-ID: <002701c36e2f$fa8a1ee0$1301090a(a)xpace.net> From: "Jim *******" <jim(a)********.com> To: <*******(a)sympatico.ca> References: <200306291045.23982.*******(a)sympatico.ca> <200308122233.58706.*******(a)sympatico.ca> <01b901c36d03$22467c40$1701090a(a)xpace.net> <200308282311.59573.*******(a)sympatico.ca> Subject: Re: [oclug] computer gear garage sale Date: Fri, 29 Aug 2003 09:18:03 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 X-Authenticated-Sender: jim(a)********.com X-Spam-Processed: ********.com, Fri, 29 Aug 2003 09:18:06 -0400 (not: message from valid local sender) Status: R X-Status: N ================================================= original e-mail ====== Any ideas?

2 1

spammers to the suse list
by Doug McGarrett 01 Sep '03

01 Sep '03

I have to think that you're getting your spam from somewhere else. I don't get any. (So far, and I've been on the list for years.) I don't open unknown attachments, and frankly, I usually use Windows and Eudora.) I also, in Windows, use a pop-up killer. I use Netscape as a browser, and I don't go to porn sites. I normally go only to reference sites, or places that sell what I want to buy, like computer parts, clothes, etc. And Google. That's where I find the other sites. I will go back and use more Linux when I get the ambition to make a new machine. It's just too slow on this old 160 MHz machine. (So is Windows.) If I got a batch of spam to this list, I guess I would get off it. I hate spam, and I especially hate porn spam. I might even change my internet supplier, if it got ridiculous. --doug, wa2say

3 2

SuSE 8.2 and cluster
by Stefan Parvu 01 Sep '03

01 Sep '03

Hi, Any info, docs about how to setup a SuSE cluster based on 8.2 or 8.1 ? Is there any mailing list within SuSE regarding this subject ? Under Yast2 there is no Cluster Selection to easy see what software comes for cluster solution. Maybe a good tip for SuSE to add a cluster solution under Yast2 ! Many thanks stefan

3 2

Scripting
by Michael Satterwhite 01 Sep '03

01 Sep '03

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This is probably either very simple or impossible. If I have a script (Perl, Python, whatever), is it possible to execute an external command (say, tar - -vt) and pipe the output from stdout into the script I'm currently running? I don't see the syntax to do it, but I figured the gurus here would no for sure. tia - ---Michael -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.2-rc1-SuSE (GNU/Linux) iD8DBQE/Ul0jjeziQOokQnARAgjEAJkBo7TqT5hChrGoE74gessxCnFtcQCdG3AJ yKa8kZlYic+LwtZhr0HRwqU= =8JAS -----END PGP SIGNATURE-----

3 2

Re: [SLE] HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP
by hgonzale＠cantv.net 31 Aug '03

31 Aug '03

----------- Mensaje Original -------------- De: Maura Edeweiss Monville [memonvil(a)artsci.wustl.edu] Para: suse-linux-e(a)suse.com [suse-linux-e(a)suse.com] Cc: Asunto: [SLE] HELPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPP Fecha: 31/08/2003 17:10:02 Mensaje: I'm running SuSE 8.2 on a Pentiun 4 PC I tried to install X-CD-Roast .... this is the result when I try to run it .... How can I save my s/w ????? linux:/home/maumon # xcdroast ** WARNING **: No /usr/X11R6/bin/cdrecord installed ** WARNING **: (Invalid lib-directory? Check -l option) linux:/home/maumon # maura you need to install first the cdrocord program. A lot of X CD writers are front end for cdreord. Install it

1 0

Just installed and having problems ...]
by Thinker 31 Aug '03

31 Aug '03

I posted this on the apt4rpm-suse list earlier but I haven't received a response yet. Can someone please help me here ? I just installed apt-0.5.5cnc6-rb3.i386.rpm on my SuSE 8.2 box. Once I had it installed I executed apt-get update to update the database and then I executed apt-get upgrade. This gave me a listing ... '232 packages upgraded, 0 newly installed, 0 removed and 44 not upgraded'. I said yes to continue and everything seemed to be going well until 'Executing RPM (-Uvh)..." came up. Now it appears that I have something like 30 plus file conflicts and the message 'E: Sub-process /bin/rpm returned an error code (250) So .. questions.. 1. How can I show the output of what I am seeing as an error, in case anyone wants to see exactly what I am seeing? 2. How do I resolve these conflicts? 3. What is Error 250 and where can I go to find out more about errors and problem solving with apt? 4. The site (http://linux01.gwdg.de/apt4rpm/apt4suse.html) states that apt works best on clean systems. How do I get my system to such a state? Do I really have to reinstall? Thanks for your help. -=Thinker

6 14

netgear ma101 usb adapter
by jack malone 31 Aug '03

31 Aug '03

I'm trying to get this wireless usb adapter installed an working in suse 8.2. I plugged it into usb port on back of computer it the computer seemed to lock up. so i rebooted with it plugged into usb port an it locked up during booting process. had to reboot with it not plugged in to get going agin. I have an tyan mother board with dual cpu ( S2466N-4M ). Can anyone give me info on getting this working or had this problem know the solution. thanks jack

2 1

[SLE] adsl
by Peter Bradley 31 Aug '03

31 Aug '03

My previous post was a mess, so this is a cleaned up version (and an apology): Finally managed to install the drivers following the instructions above, but I now get the following message when I try start-adsl: I'm sorry, I didn't find your ADSL modem! Tips: check that you are running this program as root and your device is seen by your OS Linux users : check /proc/bus/usb/devices BSD users : check your ugen and usb entries in /dev using channel 2 Using interface ppp0 Connect: ppp0 <--> /dev/pts/2 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] SIOCADDRT: No such device sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] LCP: timeout sending Config-Requests Connection terminated. Waiting for 1 child processes... script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942 Terminating on signal 15. Waiting for 1 child processes... script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942 Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1 (pid 1942) terminated with signal 15 I checked /proc/bus/usb/devices, and it says: T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.04 S: Manufacturer=Linux 2.4.20-4GB ehci-hcd S: Product=PCI device 1039:7002 (Silicon Integrated Systems [SiS]) S: SerialNumber=00:03.3 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms Since this means nothing to me, I tried (on advice) lsusb and lsmod, which give: lsusb output Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 lsmod output Module Size Used by Not tainted snd-pcm-oss 45888 0 (autoclean) snd-mixer-oss 13560 1 (autoclean) [snd-pcm-oss] videodev 5600 0 (autoclean) isa-pnp 29672 0 (unused) usbserial 18460 0 (autoclean) (unused) parport_pc 25800 1 (autoclean) lp 6240 0 (autoclean) parport 22440 1 (autoclean) [parport_pc lp] ipv6 134388 -1 (autoclean) snd-intel8x0 19204 1 snd-pcm 62912 0 [snd-pcm-oss snd-intel8x0] snd-timer 11904 0 [snd-pcm] snd-ac97-codec 31152 0 [snd-intel8x0] snd-mpu401-uart 3360 0 [snd-intel8x0] snd-rawmidi 13824 0 [snd-mpu401-uart] snd-seq-device 4000 0 [snd-rawmidi] snd 35940 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3396 0 [snd] ipt_TOS 984 9 (autoclean) ipt_LOG 3288 1 (autoclean) ipt_state 568 10 (autoclean) st 27956 0 (autoclean) (unused) sr_mod 12600 0 (autoclean) sg 25852 0 (autoclean) mousedev 4148 0 (unused) joydev 5632 0 (unused) evdev 4032 0 (unused) input 3104 0 [mousedev joydev evdev] usb-ohci 18760 0 (unused) ehci-hcd 16012 0 (unused) usbcore 57836 1 [usbserial usb-ohci ehci-hcd] raw1394 14516 0 (unused) pppoatm 2408 0 (unused) ppp_generic 16476 0 (autoclean) [pppoatm] slhc 4624 0 (autoclean) [ppp_generic] ohci1394 16180 0 (unused) ieee1394 32880 0 [raw1394 ohci1394] af_packet 12392 1 (autoclean) sis900 12588 1 ipt_REJECT 2904 3 (autoclean) iptable_mangle 2072 1 (autoclean) iptable_filter 1644 1 (autoclean) ip_nat_ftp 2736 0 (unused) iptable_nat 15470 1 [ip_nat_ftp] ip_conntrack_ftp 3664 1 ip_conntrack 16380 3 [ipt_state ip_nat_ftp iptable_nat ip_conntrack_ftp] ip_tables 11040 9 [ipt_TOS ipt_LOG ipt_state ipt_REJECT iptable_mangle iptable_filter iptable_nat] ide-scsi 9296 0 ide-cd 29404 0 cdrom 28192 0 [sr_mod ide-cd] nls_iso8859-1 2812 1 (autoclean) ntfs 75244 1 (autoclean) reiserfs 200532 1 Anyone got any ideas what I might try next? Sorry to have to rely so completely on you all, but I just have no idea about these things and SuSE support say they can't help. Apologies again. Cheers Peter Check the headers for your unsubscription address For additional commands send e-mail to suse-linux-e-help(a)suse.com Also check the archives at http://lists.suse.com Please read the FAQs: suse-linux-e-faq(a)suse.com

1 0

Fw: [SLE] adsl
by Peter Bradley 31 Aug '03

31 Aug '03

> ----- Original Message ----- > From: "Jan Joosten" <jan_joosten(a)planet.nl> > To: "Peter Bradley" <apvx95(a)dsl.pipex.com>; <suse-linux-e(a)suse.com> > Sent: Thursday, August 28, 2003 8:11 PM > Subject: Re: [SLE] adsl > > > > On Wednesday 27 August 2003 18:57, Peter Bradley wrote: > > > Guys/Gals, > > > > > > I'm trying to get an Alcatel speedtouch 330 DSL modem working on a new > 8.2 > > > installation. SuSE support say they can't help. > > > > > You might try the following sites: > > http://www.xs4all.nl/~pschram/english.html > > This helped me tremendously in getting the Speedtouch 33o working with a > SUSE > > 8.1 box. > > > > I followd the instructions on: > > > > http://linux-usb.sourceforge.net/SpeedTouch/ > > > > for my SUSE 8.2 box and it works just fine for about 2 months now. > > > > > > > > The post also says to make sure the kernel supports something called > HDLC, > > > and USB. How can I tell? > > > > Most probably installed when you followed the standard SuSE installation > > > > Jan Joostne > > > > -- > > Check the headers for your unsubscription address > > For additional commands send e-mail to suse-linux-e-help(a)suse.com > > Also check the archives at http://lists.suse.com > > Please read the FAQs: suse-linux-e-faq(a)suse.com > > > > > > > > Finally managed to install the drivers following the instructions above, but > I now get the following message when I try start-adsl: > > I'm sorry, I didn't find your ADSL modem! > Tips: check that you are running this program as root and your device is > seen by your OS > Linux users : check /proc/bus/usb/devices > BSD users : check your ugen and usb entries in /dev > using channel 2 > Using interface ppp0 > Connect: ppp0 <--> /dev/pts/2 > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > SIOCADDRT: No such device > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xa4853f90>] > LCP: timeout sending Config-Requests > Connection terminated. > Waiting for 1 child processes... > script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942 > Terminating on signal 15. > Waiting for 1 child processes... > script /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1, pid 1942 > Child process /usr/local/sbin/pppoa3 -m 1 -c -vpi 0 -vci 38 -e 1 (pid 1942) > terminated with signal 15 > > I checked /proc/bus/usb/devices, and it says: > > T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 > B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 2.04 > S: Manufacturer=Linux 2.4.20-4GB ehci-hcd > S: Product=PCI device 1039:7002 (Silicon Integrated Systems [SiS]) > S: SerialNumber=00:03.3 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms > > Since this means nothing to me, I tried (on advice) lsusb and lsmod, which > give: > > lsusb output > > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 > > lsmod output > > Module Size Used by Not tainted > snd-pcm-oss 45888 0 (autoclean) > snd-mixer-oss 13560 1 (autoclean) [snd-pcm-oss] > videodev 5600 0 (autoclean) > isa-pnp 29672 0 (unused) > usbserial 18460 0 (autoclean) (unused) > parport_pc 25800 1 (autoclean) > lp 6240 0 (autoclean) > parport 22440 1 (autoclean) [parport_pc lp] > ipv6 134388 -1 (autoclean) > snd-intel8x0 19204 1 > snd-pcm 62912 0 [snd-pcm-oss snd-intel8x0] > snd-timer 11904 0 [snd-pcm] > snd-ac97-codec 31152 0 [snd-intel8x0] > snd-mpu401-uart 3360 0 [snd-intel8x0] > snd-rawmidi 13824 0 [snd-mpu401-uart] > snd-seq-device 4000 0 [snd-rawmidi] > snd 35940 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 > snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] > soundcore 3396 0 [snd] > ipt_TOS 984 9 (autoclean) > ipt_LOG 3288 1 (autoclean) > ipt_state 568 10 (autoclean) > st 27956 0 (autoclean) (unused) > sr_mod 12600 0 (autoclean) > sg 25852 0 (autoclean) > mousedev 4148 0 (unused) > joydev 5632 0 (unused) > evdev 4032 0 (unused) > input 3104 0 [mousedev joydev evdev] > usb-ohci 18760 0 (unused) > ehci-hcd 16012 0 (unused) > usbcore 57836 1 [usbserial usb-ohci ehci-hcd] > raw1394 14516 0 (unused) > pppoatm 2408 0 (unused) > ppp_generic 16476 0 (autoclean) [pppoatm] > slhc 4624 0 (autoclean) [ppp_generic] > ohci1394 16180 0 (unused) > ieee1394 32880 0 [raw1394 ohci1394] > af_packet 12392 1 (autoclean) > sis900 12588 1 > ipt_REJECT 2904 3 (autoclean) > iptable_mangle 2072 1 (autoclean) > iptable_filter 1644 1 (autoclean) > ip_nat_ftp 2736 0 (unused) > iptable_nat 15470 1 [ip_nat_ftp] > ip_conntrack_ftp 3664 1 > ip_conntrack 16380 3 [ipt_state ip_nat_ftp iptable_nat > ip_conntrack_ftp] > ip_tables 11040 9 [ipt_TOS ipt_LOG ipt_state ipt_REJECT > iptable_mangle iptable_filter iptable_nat] > ide-scsi 9296 0 > ide-cd 29404 0 > cdrom 28192 0 [sr_mod ide-cd] > nls_iso8859-1 2812 1 (autoclean) > ntfs 75244 1 (autoclean) > reiserfs 200532 1 > > Anyone got any ideas what I might try next? Sorry to have to rely so > completely on you all, but I just have no idea about these things and SuSE > support say they can't help. > > Cheers > > Peter >

1 0

suse linux 8,2 and promise 20378 controller
by josef332 31 Aug '03

31 Aug '03

Hello all. I want to try and install Suse 8.2 on the P4C800 motherboard using IDE RAID 1 on the promise controller. Anybody got any experience in doing so? Would it be feasible to make the RAID 1 array first and, then install suse 8.2 or should install linux in one disk and then mirror it? What would be the best way to go about this? I presume that I would have to load the linux Promise raid driver in the beginning of the installation. Is it included in the 8.2 kernel or would I have to use the one provided at the Asus site (but compiled for 8.1)Any special commands to pass to the kernel for a HT P4 ? Any installation tips and recommendations welcome

2 3