August 2003 - openSUSE Users - openSUSE Mailing Lists

9.1 unuseably slow
by David Bottrill 02 Sep '04

02 Sep '04

We received a copy of 9.1 today at work and I have installed this on three machines with dissapointing results. The first machine was an IBM Thinkpad R40 with a Centino 1600 CPU. This machine worked fine and the performance was great. The second and third machines were unusable, KDE takes serveral minutes to start, attempting to start YAST for instance will take about a minute for the SU box to appear and then another minute for YAST to load. I get similar results for all applications I have tried, in all instances the system performs like a P100 with very little RAM. The machines that run slowly are both Athlon XP based machines, one being an Athlon XP 2400 with 1GB of DDR RAM on an ECS Elite motherboard. The second machine is an XP2000 with 512MB of PC3200 RAM on a PCChips motherboard. I have applied all the updates with no effect. Any ideas would be appreciated, I've had to switch back to 9.0 as the whole 9.1 experience is unuseable has anybody got any ideas? David -- David Bottrill Registered Linux user number 330730 www.bottrill.org Internet SIP Phone: 1-747-244-2699

6 8

DVD playback...
by Matthew 14 May '04

14 May '04

Good day, Yes there are legal reasons why SuSE cannot have DVD playback of those pesky movies, but what be done? Would it be too expensive for Novell/SuSE to license a codec? Seems like there is a new copyright law in Germany that has made PackMan be more cautious. No one has made a player for Linux that is 100% legal, is it due to expense? Matt

2 1

Re: [SLE] OpenOffice slow in 8.2
by H du Plooy 27 Dec '03

27 Dec '03

On Wed, 2003-05-28 at 22:19, Fred A. Miller wrote: > Uninstall it, download the latest release, and install it. 'Should fix > your problems. The release that ships with 8.2 is buggy. > > Fred Thanks Fred, that's exactly what I did, installed OOo 1.1Beta. Works smooth as silk if I stop Setiathome, but remains unusuable if seti or anything cpu intensive is running. This in itself isn't so bad, except that I didn't have this problem under 8.1 and 8.0, where I had seti runing with nice=1 all the time and OOo was working smoothly. Just trying to understand this Thanks Hans

9 13

Gnome Screensavers
by Thom Nuzum 09 Dec '03

09 Dec '03

Hi Folks, I can't seem to get any of the Screen Savers to start in Gnome, though they are all working in KDE... or are they only for KDE? They are in the Gnome menu:system Screen Savers. Thanks (i know they aren't so important)

4 5

KDE-kiosk.
by Prabu Subroto 23 Oct '03

23 Oct '03

Hi everybody.... I am using KDE 3.0.x not yet 3.1 and SuSE Linux 8.1 . I have written a web enabling database application with PHP4. The users use the application with internet browser mozilla. My boss said that his sellers may only use the internet browser for the database application. So how can I lock everything in KDE 3.0.x ? I want after the user login, the mozilla will be automatically launched. I also want if they close the mozilla than the user will be automatically kicked out (log out). Is it possible with KDE 3.0.x? Do I have to upgrade 3.1 ? Thank you very much in advance. __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com

7 13

Spamassassin question....
by James Hatridge 09 Oct '03

09 Oct '03

-----BEGIN PGP SIGNED MESSAGE----- Hi all... Ok, I really really want to stop the hot girl ads etc. So I installed Spamassassin. But now what? I don't see anyway of getting the damn thing to start working! I use KDE and Kmail, but no where does the how-to's talk about Kmail. SO, would one of you kind people out there give me a 1,2,3 list of how to get this working? Thanks JIM Jim Hatridge Linux User #88484 - -- Our country was colonized by the religious, political, economic, and criminal rejects of every country in the world. We have been carefully breeding insane, obsessive, fanatic lunatics with each other for over 400 years, resulting in the glorious strain of humanity known as "Americans". You have to expect some... peculiarities. -----BEGIN PGP SIGNATURE----- Version: 2.6.3in Charset: noconv iQCVAwUBP0H5+XvM2SsNv63DAQFG2QP/SycoLBvoE7/UZ+OLFXkgQpA/Q728YZAv jsGgqvTRwdVxfT69fPf8ixChpaSW1dfrdd37hhHxh/w6lO1VoydIHgplO0qOiIu3 yllNh5tG+zu/+TwX8imgO4K6snr6Aq65hu+8R7lrxTVpXzrC6NPcrTG+UZILYz7m J+NapJ/57TM= =SjqU -----END PGP SIGNATURE-----

16 24

Re: [SLE] Laptop Wireless
by Branton Boehm 25 Sep '03

25 Sep '03

I'm reposting this, because I think that it's been pushed down far enough that people aren't seeing it. Basically, I've got my internal wireless card setup as my eth-pcmcia-0 device. Someone said something about how it should be bridged to eth1 and then I can use it. It doesn't seem to be doing that. Can anyone help? Thanks, Branton > >I'm sorry that I haven't yet got this working... I really do appreciate >your help. > > >>>>3.1) fire up yast2 >>>> configure network card as pcmcia (DHCP settings might be >>>>troublesome, use hardcoded IP, just for testing at least) >>> >>> >>>YaST2 doesn't give me the option to configure the "Harris Semiconductor" >>>(my wireless card) that it detects as PCMCIA. If I click "Configure", it >>>goes straight to the screen where you set the IP address. I can click >>>"Configure" where it says "Other (not detected)" and then I get the >>>choice of a PCMCIA device. But I don't know how to hook that up to my >>>internal wireless card. >>> >>>If someone could point me in the right direction here, I would really >>>appreciate it. (Currently, the wireless is configured as eth1 and not as >>>PCMCIA.) >> >>Thats exactly where you need to go - Others/Pcmcia - and set up config for >>IP&gateway&DNS there. >> >> >>After it got pcmcia-ethX device, it will be bridged as ethY, and on >>restart of all things it will know that you got it.. >>Basic simple test - is that after you got it all - ifconfig should >>display ethY configured (might miss IP though, if wireless gateway is >>unreachable, but rest should be there) > >I've now got a eth-pcmcia-0 device that was configued in YaST2, but I don't >see that it was bridged anywhere. Is that something that I need to do or >should it be done automatically? Here is the output of ifconfig: > ># ifconfig >eth0 Link encap:Ethernet HWaddr 00:00:E2:58:9A:5B > inet addr:192.168.1.110 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::200:e2ff:fe58:9a5b/10 Scope:Link > UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:1047 errors:0 dropped:0 overruns:0 frame:0 > TX packets:1003 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > RX bytes:403170 (393.7 Kb) TX bytes:127242 (124.2 Kb) > Interrupt:11 Base address:0x9000 Memory:81a00000-81a00038 > >lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:40 errors:0 dropped:0 overruns:0 frame:0 > TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:2608 (2.5 Kb) TX bytes:2608 (2.5 Kb) > >eth0 is my ethernet card (which is working correctly). It doesn't appear >that the internal wireless card was "bridged" like you referred to. So... >what do I do now? > >Thanks, > Branton Boehm > >_________________________________________________________________ >MSN Photos is the easiest way to share and print your photos: >http://photos.msn.com/support/worldwide.aspx > > >-- >Check the headers for your unsubscription address >For additional commands send e-mail to suse-linux-e-help(a)suse.com >Also check the archives at http://lists.suse.com >Please read the FAQs: suse-linux-e-faq(a)suse.com _________________________________________________________________ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com

4 3

nVidia
by Fred A. Miller 25 Sep '03

25 Sep '03

The latest nVidia driver that one is to install from nVidia after the kernel update just posted and installed by YOU, is NOT usable and WON'T install!! I hope SuSE is working on this, as 3D is "GONE" because of this error. Some have very slow systems now. Fred -- Planet Earth - a subsidiary of Microsoft®. We have no bugs in our software, Never!, We do have undocumented added features, that you will find amusing, at no added cost, to you, at this time.

10 13

How to configure external monitor
by Per-Olof Litby 16 Sep '03

16 Sep '03

Greetings, What is the correct way to configure and use an external monitor on a laptop? In my case, I would like to use an external 1280x1024 LCD display. How should I configure the monitor and color/resolution settings in Yast2 in order for the system to be able to handle connection/disconnection of the external monitor without the X settings being messed up? Thanks ahead, -- --------------------------------------------------------------- Per-Olof Litby Phone: +46 8 631-1463 Regional Mgr - Nordic/Baltic Fax: +46 8 631-1005 Java Web Services Email: politby(a)sun.com Sun Microsystems --------------------------------------------------------------- Calendar URL below (Sun only) http://namefinder/NameFinder?nfquery=-s+23213&view=calendar --------------------------------------------------------------- I've got this great ambition to die of exhaustion rather than boredom. ---------------------------------------------------------------

2 2

Sharp Zaurus SL-5500 USB Problems
by Remi Broemeling 09 Sep '03

09 Sep '03

I am endeavouring to get my Sharp Zaurus SL-5500 to work with SuSE 8.2. I've followed the instructions at http://sdb.suselinux.hu/en/sdb/html/jreuter_zaurus_usb.html, and have also read over http://www.ruault.com/Zaurus/ethernet-over-usb-howto.html, looking for something that I have missed. I've found nothing. When I seat my Zaurus in the cradle and turn it on, I don't get any of the normal 'beep' noises that are associated with a new USB device connection, and I get this output in /var/log/messages. ----------------------------------------------------------------------- /var/log/messages ----------------------------------------------------------------------- - chop - Aug 23 01:09:33 linux kernel: hub.c: new USB device 00:07.2-1, assigned address 10 Aug 23 01:09:33 linux kernel: usb.c: USB device 10 (vend/prod 0x4dd/0x8004) is not claimed by any active driver. Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65940, burb d5b65740 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65740, burb d5b65940 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65940, burb d5b65740 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65740, burb d5b65940 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65940, burb d5b65740 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65740, burb d5b65940 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65940, burb d5b65740 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65740, burb d5b65940 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65940, burb d5b65740 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65740, burb d5b65940 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux kernel: usb-uhci.c: ENXIO 80000a80, flags 0, urb d5b65940, burb d5b65740 Aug 23 01:09:37 linux kernel: usbdevfs: USBDEVFS_CONTROL failed dev 10 rqt 128 rq 6 len 9 ret -6 Aug 23 01:09:37 linux /etc/hotplug/usb.agent[14488]: cannot get config descriptor 0, No such device or address (6) Aug 23 01:09:37 linux last message repeated 5 times Aug 23 01:09:37 linux /etc/hotplug/usb.agent[14489]: cannot get config descriptor 0, No such device or address (6) Aug 23 01:09:37 linux last message repeated 4 times - chop - ----------------------------------------------------------------------- The interface usb0 is not shown in output from 'ifconfig -a', and the usbdnet module is not loaded. Following is the output from 'lsusb -v' when the Zaurus is seated and turned on. ----------------------------------------------------------------------- `lsusb -v` [STDOUT] ----------------------------------------------------------------------- - chop UHCI Root Hub - Bus 002 Device 011: ID 04dd:8004 Sharp Corp. Zaurus SL-5000D/SL-5500 PDA Language IDs: none (invalid length string descriptor bf; len=0) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x04dd Sharp Corp. idProduct 0x8004 Zaurus SL-5000D/SL-5500 PDA bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 73 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 4 unknown descriptor type: 05 24 00 10 01 unknown descriptor type: 0d 24 0f 05 00 00 00 00 ea 05 00 00 00 unknown descriptor type: 05 24 06 00 01 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 6 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 64 bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 64 bInterval 0 Language IDs: none (invalid length string descriptor bf; len=0) - chop Texas Instruments TUSB2036 Hub - - chop IntelliMouse Explorer - - chop USB UHCI Root Hub - ----------------------------------------------------------------------- While garnering this information, STDERR received the following (as output from the lspci command): ----------------------------------------------------------------------- `lsusb -v` [STDERR] ----------------------------------------------------------------------- string descriptor 1 invalid (bf bf; len=0) string descriptor 2 invalid (bf bf; len=0) string descriptor 4 invalid (bf bf; len=0) string descriptor 6 invalid (bf bf; len=0) string descriptor 7 invalid (bf bf; len=0) string descriptor 1 invalid (bf bf; len=0) string descriptor 2 invalid (bf bf; len=0) ----------------------------------------------------------------------- I've tried various things, to apparently no avail - the error message remains static, and I can't find any mention of it in the SuSE mailing list archive except for one note that is in german... so I am hoping that someone here can help me. Various other information about my system follows, I tried to guess what would be asked of me and include as much information as I could. My kernel is the stock SuSE kernel (athlon), I did not build my own. USBDNET was already installed on the system as a part of the SuSE installation, so it was unnecessary to build my own copy of it. ----------------------------------------------------------------------- `uname -a` ----------------------------------------------------------------------- Linux linux 2.4.20-4GB-athlon #1 Wed Aug 6 18:27:52 UTC 2003 i686 unknown unknown GNU/Linux ----------------------------------------------------------------------- ----------------------------------------------------------------------- System boot log ----------------------------------------------------------------------- - cut - Aug 22 00:35:10 linux syslogd 1.4.1: restart. Aug 22 00:35:12 linux /etc/hotplug/usb.rc[850]: loaded HCD: usb-uhci Aug 22 00:35:15 linux kernel: klogd 1.4.1, log source = /proc/kmsg started. Aug 22 00:35:15 linux kernel: Inspecting /boot/System.map-2.4.20-4GB-athlon Aug 22 00:35:15 linux kernel: Loaded 20861 symbols from /boot/System.map-2.4.20-4GB-athlon. Aug 22 00:35:15 linux kernel: Symbols match kernel version 2.4.20. Aug 22 00:35:15 linux kernel: Loaded 357 symbols from 18 modules. Aug 22 00:35:15 linux kernel: PCI: Found IRQ 9 for device 00:0d.0 Aug 22 00:35:15 linux kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Aug 22 00:35:15 linux kernel: See Documentation/networking/vortex.txt Aug 22 00:35:15 linux kernel: 00:0d.0: 3Com PCI 3c905C Tornado at 0xc000. Vers LK1.1.16 Aug 22 00:35:15 linux kernel: 00:01:03:68:b2:23, IRQ 9 Aug 22 00:35:15 linux kernel: product code 465a rev 00.13 date 06-10-00 Aug 22 00:35:15 linux kernel: Internal config register is 1800000, transceivers 0xa. Aug 22 00:35:15 linux kernel: 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. Aug 22 00:35:15 linux kernel: MII transceiver found at address 24, status 782d. Aug 22 00:35:15 linux kernel: Enabling bus-master transmits and whole-frame receives. Aug 22 00:35:15 linux kernel: 00:0d.0: scatter/gather enabled. h/w checksums enabled Aug 22 00:35:15 linux kernel: raw1394: /dev/raw1394 device initialized Aug 22 00:35:15 linux kernel: usb.c: registered new driver usbdevfs Aug 22 00:35:15 linux kernel: usb.c: registered new driver hub Aug 22 00:35:15 linux kernel: usb-uhci.c: $Revision: 1.275 $ time 19:05:30 Aug 6 2003 Aug 22 00:35:15 linux kernel: usb-uhci.c: High bandwidth mode enabled Aug 22 00:35:15 linux kernel: PCI: Found IRQ 10 for device 00:07.3 Aug 22 00:35:15 linux kernel: PCI: Sharing IRQ 10 with 00:07.2 Aug 22 00:35:15 linux kernel: PCI: Sharing IRQ 10 with 00:10.0 Aug 22 00:35:15 linux kernel: usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 10 Aug 22 00:35:15 linux kernel: usb-uhci.c: Detected 2 ports Aug 22 00:35:15 linux kernel: usb.c: new USB bus registered, assigned bus number 1 Aug 22 00:35:15 linux kernel: hub.c: USB hub found Aug 22 00:35:15 linux kernel: hub.c: 2 ports detected Aug 22 00:35:15 linux kernel: PCI: Found IRQ 10 for device 00:07.2 Aug 22 00:35:15 linux kernel: PCI: Sharing IRQ 10 with 00:07.3 Aug 22 00:35:15 linux kernel: PCI: Sharing IRQ 10 with 00:10.0 Aug 22 00:35:15 linux kernel: usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 10 Aug 22 00:35:15 linux kernel: usb-uhci.c: Detected 2 ports Aug 22 00:35:15 linux kernel: usb.c: new USB bus registered, assigned bus number 2 Aug 22 00:35:15 linux kernel: hub.c: USB hub found Aug 22 00:35:15 linux kernel: hub.c: 2 ports detected Aug 22 00:35:15 linux kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Aug 22 00:35:15 linux kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Aug 22 00:35:15 linux kernel: hub.c: new USB device 00:07.2-1, assigned address 2 Aug 22 00:35:15 linux kernel: usb.c: USB device 2 (vend/prod 0x45e/0x1e) is not claimed by any active driver. Aug 22 00:35:15 linux kernel: hub.c: new USB device 00:07.2-2, assigned address 3 Aug 22 00:35:15 linux kernel: hub.c: USB hub found Aug 22 00:35:15 linux kernel: mice: PS/2 mouse device common for all mice Aug 22 00:35:15 linux kernel: hub.c: 4 ports detected Aug 22 00:35:16 linux kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Aug 22 00:35:16 linux kernel: sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Aug 22 00:35:16 linux kernel: Uniform CD-ROM driver Revision: 3.12 Aug 22 00:35:21 linux kernel: /dev/vmmon: Module vmmon: registered with major=10 minor=165 Aug 22 00:35:21 linux kernel: /dev/vmmon: Module vmmon: initialized Aug 22 00:35:21 linux insmod: Warning: loading /lib/modules/2.4.20-4GB-athlon/misc/vmmon.o will taint the kernel: no license Aug 22 00:35:21 linux insmod: See http://www.tux.org/lkml/#export-tainted for information about tainted modules Aug 22 00:35:21 linux insmod: Warning: loading /lib/modules/2.4.20-4GB-athlon/misc/vmmon.o will taint the kernel: forced load Aug 22 00:35:21 linux insmod: Module vmmon loaded, with warnings Aug 22 00:35:22 linux kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] Aug 22 00:35:22 linux kernel: parport_pc: Via 686A parallel port: io=0x378 Aug 22 00:35:22 linux insmod: Warning: loading /lib/modules/2.4.20-4GB-athlon/misc/vmnet.o will taint the kernel: no license Aug 22 00:35:22 linux insmod: See http://www.tux.org/lkml/#export-tainted for information about tainted modules Aug 22 00:35:22 linux insmod: Warning: loading /lib/modules/2.4.20-4GB-athlon/misc/vmnet.o will taint the kernel: forced load Aug 22 00:35:22 linux insmod: Module vmnet loaded, with warnings Aug 22 00:35:22 linux kernel: /dev/vmnet: open called by PID 1163 (vmnet-bridge) Aug 22 00:35:22 linux kernel: /dev/vmnet: hub 0 does not exist, allocating memory. Aug 22 00:35:22 linux kernel: /dev/vmnet: port on hub 0 successfully opened Aug 22 00:35:22 linux kernel: bridge-eth0: up Aug 22 00:35:22 linux kernel: bridge-eth0: attached Aug 22 00:35:22 linux kernel: usb.c: registered new driver hiddev Aug 22 00:35:22 linux kernel: usb.c: registered new driver hid Aug 22 00:35:22 linux kernel: /dev/vmnet: open called by PID 1195 (vmnet-natd) Aug 22 00:35:22 linux kernel: /dev/vmnet: hub 8 does not exist, allocating memory. Aug 22 00:35:22 linux kernel: /dev/vmnet: port on hub 8 successfully opened Aug 22 00:35:23 linux kernel: usb-uhci.c: interrupt, status 3, frame# 297 Aug 22 00:35:23 linux kernel: input0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb2:2.0 Aug 22 00:35:23 linux kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech(a)suse.cz> Aug 22 00:35:23 linux kernel: hid-core.c: USB HID support drivers Aug 22 00:35:23 linux insmod: Using /lib/modules/2.4.20-4GB-athlon/kernel/drivers/usb/hid.o Aug 22 00:35:23 linux insmod: Symbol version prefix '' Aug 22 00:35:23 linux insmod: Using /lib/modules/2.4.20-4GB-athlon/kernel/drivers/input/keybdev.o Aug 22 00:35:24 linux kernel: PCI: Found IRQ 11 for device 00:0c.0 Aug 22 00:35:28 linux kernel: IPv6 v0.8 for NET4.0 Aug 22 00:35:28 linux kernel: IPv6 over IPv4 tunneling driver Aug 22 00:35:28 linux sshd[1701]: Server listening on :: port 22. Aug 22 00:35:28 linux kernel: Got silent jpeg. Aug 22 00:35:29 linux kernel: Got silent jpeg. Aug 22 00:35:32 linux kernel: /dev/vmnet: open called by PID 1986 (vmnet-netifup) Aug 22 00:35:32 linux kernel: /dev/vmnet: port on hub 8 successfully opened Aug 22 00:35:32 linux vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0 Aug 22 00:35:32 linux vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. Aug 22 00:35:32 linux vmnet-dhcpd: All rights reserved. Aug 22 00:35:32 linux vmnet-dhcpd: Aug 22 00:35:32 linux vmnet-dhcpd: Please contribute if you find this software useful. Aug 22 00:35:32 linux vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html Aug 22 00:35:32 linux vmnet-dhcpd: Aug 22 00:35:32 linux vmnet-dhcpd: Configured subnet: 172.16.222.0 Aug 22 00:35:32 linux vmnet-dhcpd: Setting vmnet-dhcp IP address: 172.16.222.254 Aug 22 00:35:32 linux kernel: /dev/vmnet: open called by PID 2014 (vmnet-dhcpd) Aug 22 00:35:32 linux kernel: /dev/vmnet: port on hub 8 successfully opened Aug 22 00:35:32 linux vmnet-dhcpd: Recving on VNet/vmnet8/172.16.222.0 Aug 22 00:35:32 linux vmnet-dhcpd: Sending on VNet/vmnet8/172.16.222.0 Aug 22 00:35:34 linux /usr/sbin/cron[2075]: (CRON) STARTUP (fork ok) Aug 22 00:35:36 linux /etc/hotplug/net.agent[1751]: No HW description found ... exiting Aug 22 00:35:38 linux kernel: isapnp: Scanning for PnP cards... Aug 22 00:35:38 linux kernel: isapnp: No Plug & Play device found Aug 22 00:35:38 linux kernel: eth0: no IPv6 routers present Aug 22 00:35:40 linux /etc/hotplug/net.agent[1994]: No HW description found ... exiting Aug 22 00:35:42 linux kernel: vmnet8: no IPv6 routers present Aug 22 00:35:48 linux kernel: Linux video capture interface: v1.00 - cut - KDM starts, boot process continues, etc. - ----------------------------------------------------------------------- If you need any other information, please ask. Any help that could be provided would be very much appreciated. Thanks!

3 2