Hello:
I have been unable to find the package "hardsuse" that is supposed to
contain the script "harden_suse" in series "sec". I have looked on both
the 7.1 and 7.2 cds, and on the SuSE ftp site (for 7.1). Can anybody
tell me where else they might be?
Also, is sftp, in package OpenSsh with 7.2, available in 7.1? I cannot
find it there. (I want to get my new 7.2 installation up and running
before I upgrade my 7.1 installation, but need to transfer files between
the two machines securely.)
Thanks in advance,
George
--
George H. Griffin Powered by SuSE Linux 7.1, kernel 2.4.2
"Always believe your observations, not your theories
(no matter how near they may be to your heart) if the
two are in conflict!" John Gribbin
Hello i am a user of redhat linux waiting for the suse linux 7.1 iso image
to be available so that i could get it ..
i was thinking what are the benifits i will have when i install suse on my
workstation ?
*º¤., ¸¸,.¤º*¨¨¨*¤Allah Hafiz*º¤., ¸¸,.¤º*¨¨*¤
*º¤., ¸¸,.¤º*¨¨¨*Faisal Gillani *º¤., ¸¸,.¤º*¨¨*¤
*º¤., ¸¸,.¤º*¨¨¨*¤Allah Hafiz*º¤., ¸¸,.¤º*¨¨*¤
*º¤., ¸¸,.¤º*¨¨¨*Faisal Gillani *º¤., ¸¸,.¤º*¨¨*¤
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Hey i am a user of redhat linux but have heard so much about suse wana check
it out the new 7.1 version
any idea where i can find its ISO image
thanks
a lot
*º¤., ¸¸,.¤º*¨¨¨*¤Allah Hafiz*º¤., ¸¸,.¤º*¨¨*¤
*º¤., ¸¸,.¤º*¨¨¨*Faisal Gillani *º¤., ¸¸,.¤º*¨¨*¤
Hello all readers,
I have a epson stylus color 440 printer.
I can print ok in Black but not in color any help appreciated.
I'm using Suse 6.2
Peter
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Can I put disk quotas in a file system that has ben configured with reiserfs ?
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Can I put disk quotas in a file system that has ben
configured with reiserfs ?</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV></BODY>
Hi,
Slightly off topic, but does anybody know of widely used naming
conventions used for shell scripting? Oracle uses the optimal
flexible architecture, which describes variables both within sql
and for naming sql scripts, but I have not found anything
similar for unix/linux. If anyone could point to a resource, I'd
be most appreciative.
Cheers,
GC
--
Gregory Conron
gconron(a)hfx.andara.com - email
(902) 443-4562 - voicemail
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
==========================================================================
What follows is a complete history of the problems I've had over the last
2 days, as accurately as I can remember them. The Aiee messages have been
clipped from /var/log/warn, and the Oops screen dump has been faithfully
copied down to the last digit. /var/log/boot.msg is included at the end.
==========================================================================
Hello all,
Can someone please help me work this out. I believe I have a hardware
problem, either in memory or the CPU, but am not sure which. If someone
more experienced at diagnosing this type of problem on Linux can give the
following a once over, I'd be very grateful.
This is a brand new system, 1 week old. It has an AMD Athlon 550Mhz CPU,
128MB of memory, two UDMA66 disks (8GB for /boot, swap, / and 20GB 7200rpm
for other data) and two 3Com 3C905B-TX network cards. The system is
intended to be an internet server for my home network. It's running SuSE
6.3 (2.2.13 kernel).
The first indication something was amiss was a system freeze up during the
SuSE install. It just stopped in the middle of installing the contents of
CD1. I could get nothing from the install screen, but was able to change
virtual consoles to look at the install log. Something in the install had
falled over with a Segmentation fault. Restarting the install again seemed
to go through ok.
The next think I spotted was these strange errors appearing in /var/log/warn.
I've put the last two days worth together below:
kernel: iput: Aieee, semaphore in use inode 03:03/360840, count=0
kernel: iput: Aieee, atomic write semaphore in use inode 03:03/360840, count=0
kernel: iput: Aieee, semaphore in use inode 03:03/228759, count=0
kernel: iput: Aieee, atomic write semaphore in use inode 03:03/228759, count=0
kernel: iput: Aieee, semaphore in use inode 03:03/555542, count=0
kernel: iput: Aieee, atomic write semaphore in use inode 03:03/555542, count=0
What am I looking at here? Are these semaphore's Thread resources, or system
V semaphores? What does this message mean?
I've also been getting quite a number of these messages too:
modprobe: modprobe: Can't locate module char-major-15
During this time I noticed more strange Segmentation faults. A couple of
times while SuSEConfig runs various scripts after commiting changes made
in Yast (a really odd place to segfault). But the worst was while trying
to build my own kernel for the first time. I was trying to clean up some
stuff (like RAID, etc) and include support for the various firewall
options. make menuconfig ran ok, but 'make depend' got about about half
way through and then started to Segmentation fault processing various files.
I couldn't continue. I have another system here, my older PC that I'd just
upgraded from SuSE 6.1 to 6.3, so I NFS mounted the kernel source tree and
copied it over to a new directory, remade the linux softlink and this time
the kernel built ok.
At this point I tried experimenting with ip_forward and ipchains. I couldn't
get it to work. What struck me as odd is that I could ping the public
network interface card, from a PC on the the private network, even when a
cat'ing the /proc ip_forward file clearly showed ip_forwarding to be
turned off in the kernel (i.e. it returned 0). I can't believe that is
correct.
Anyway, I gave up on this for a while (too tired with it) and switch to
setting up squid for proxy http access. This worked ok.
Then, this evening, as I was preparing to configure sendmail for the first
time, I fired up Yast from a telnet session and it Segmenation faulted.
On the second attempt it hung the session. I tried to run a ps(1) to
find the pid from a local kvt and that also hung. So I switched to
a virtual console and tried logging in, that hung also. Back in X-windows
I tried a shutdown -r, that segfaulted, so did reboot. By this point I
was VERY worried. I had no choice but to power-cycle.
After forcing a reboot the system crashed while fsck'ing hdb2, an 18GB
partition. This is the first time it's ever had to fsck all system partitions
contiguously before as they are usually in a clean state. It crashed with
the following Oops message:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 03ff3000, %cr3 = 03ff3000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0120409>]
EFLAGS: 00010006
eax: c1efffc0 ebx: c1efffc0 ecx: 00000000 edx: c1fbd660
esi: 00000000 edi: c40ef740 ebp: 00000282 esp: c2a8bc9c
ds: 0018 es: 0018 ss: 0018
Process fsck.ext2 (pid: 17, process nr: 10, stackpage=c2a8b000)
Stack: 00000000 00000400 c01266b9 c40ef740 00000003 c1fbd660 00000000 c0126746
00000000 00000400 00000400 c2147000 00000342 c2a8bcdc c2a8bcdc c2a8a000
c2a8a000 00000000 c01272b5 c2147000 00000400 00000000 00000000 00000400
Call Trace: [<c01266b9>] [<c0126746>] [<c01272b5>] [c01260ea>] [<c0126296>] [<c0129a81>] [<c01cbfa7>] 1cc6a2>] [<c01d38fc>] [<c01cf97e>] [<c01d37ac>]
[<c01247f5>] [<c01249ae>] [<c010900c>]
Code: 8b 01 89 03 85 c0 74 2b 8b 73 04 85 f6 75 10 89 19 89 c8 2b
In the short time I've had the system it's not done this before. What I
believe has caused it is that I've changed the pattern of memory usage for
the system. In setting up squid I gave it 16MB of memory cache to play
with. It's now running into more serious trouble than it was before.
In my experience, random segfaults like this occur due to one of three causes:
1) a portion of memory is bad.
2) a CPU or CPU cache is bad
3) bad blocks in swap cause corruption when swapped out pages are read in
again.
I'm not swapping at the moment so it's got to be one of the first two.
Thing is, how to I tell? I'm used to dealing with Tru64 Alpha systems,
where the binary event log traps and logs CPU Exceptions and bad memory
reads/writes. Here, I'm blind. My gut tells me it's memory, but I can't
confirm it.
Is there anything I can do other than start taking bits back to the PC
supplier?
Regards,
John
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hello,
I'd like to know how can I reply a mail automaticaly.
For example, if I am out of the office, all of e-mail that I receive
are replied with a e-mail that say that I'm out of the office. Can I do
it with sendmail?
Thank you very much.
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
VERY IMPORTANT: THESE BINARIES ARE CREATED FROM THE CVS AND MAY NOT BE
IDENTICAL TO THE BETA THAT WAS RELEASED. THESE ARE NOT OFFICIAL KDE
BINARIES.
This will be the last build until June.
ALSO, THE PACKAGES HAVE MOVED TO A NEW SERVER THANKS TO MANDRAKE. PLEASE
CHECK THE LINKS BELOW.
A new version of the KDE ALPHA binaries are available
at us.mandrakesoft.com. Please read the README file in the
same directory. Just in case you missed it "READ THE README" prior to
doing anything! If you need help installing please go to www.kde.org and
look for directions.
These binaries are built from CVS as of 18 May
2000 at 12:00am Eastern Standard Time (-0500).
Please bring all install questions to the un-official
kde-alpha list at kde-alpha-request(a)nebsllc.com.
Qt version 2.1.0 has been released. These binaries where built with the
release package. You can get the released version used to build this code at
any Mandrake mirror, or you can get it elsewhere.
When you upgrade plese consider copying your old /opt/kde2 to an
/opt/kde2.old directory and then installing. This way you have something
to go back to.
These files are available via ftp from:
ftp://us.mandrakesoft.com/pub/kde
or via http at:
http://us.mandrakesoft.com/~molnarc (follow links for kde2 Alpha
binaries)
You will also be able to find these at (after a few days):
http://www.htw-dresden.de/~s2697
The installs have been tested by me on a Mandrake 7.1
machine. They have also been reported to work on all
other distributions.
The rpm's are built with Mandrake 7.0. If you are not running the
most recent version of rpm, I would suggest
an upgrade. You will need to do a --force and a --nodeps on the rpm
installs.
If you are running prior Alpha's I highly recommend you
update. There are a lot of fixes and some structural
changes in the packages.
You will also find Source tar.gz's in the same
directory.
--
--------------------------------------------------------
Christopher Molnar,RHCE
New England Business Services, LLC
Mandrake Software
Aetna, Inc.
Hartford, CT USA
(860)956-9408
molnarc(a)nebsllc.com
molnarc(a)mandrakesoft.com
molnarc(a)aetna.com
"It said uses Windows 95 or better, so I loaded Linux!"
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
Hi everybody.
There is an NT router in our network with the IP
10.10.10.1. That is also the DNS server.
I'm using a linux box with the IP 10.10.10.80.
programs like netscape are working well when proxy
configurations are given. But all other programs
(including ping, traceroute, every beautiful utility
of linux networking you can think of) is not working.
I'm constantly getting the error "Host not found."
The contents of /etc/resolv.conf is the following:
/* comments ... */
search jetpa.com.tr
nameserver 10.10.10.1
Question is, how can I do a configuration so my
normal network programs can work?
Thank you.
--
To unsubscribe send e-mail to suse-linux-e-unsubscribe(a)suse.com
For additional commands send e-mail to suse-linux-e-help(a)suse.com
Also check the FAQ at http://www.suse.com/Support/Doku/FAQ/
