January 2008 - openSUSE Users (русский)

[opensuse-ru] KDE4
by Alexander Varchenko 25 Jan '08

25 Jan '08

C 18 января выложен КДЕ4, кто ставил? Какие проблемы, где грабли :) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

1 0

[opensuse-ru] Русский язык в консоли
by Dmitry 17 Jan '08

17 Jan '08

Доброе время суток, All. Недавно ко мне человек обратился с интересной проблемой : у него в консоли OpenSuse 10.3 не работал русский язык. Суть проблемы заключалась в том же, что и у меня когда-то в OpenSuse 10.1. А именно : В /etc/sysconfig/keyboard KEYTABLE не равнялся ru-utf.map.gz (емнип, стояло ru1.map.gz) и данный файл (ru-utf.map.gz) в кеймапах kbd отсутствовал. По тестам ни один из присутствующих не подходил для utf8. Описание уже показывает как я этот недостаток решал. Но с выхода OpenSuse 10.1 до OpenSuse 10.3 прошло достаточно много времени, почему проблема еще существует? -- WBR, Dmitri. N��r��y隊Z)z{.��칻�&ޢ��v+b�v�r��jwlzf��^�ˬz��i��

2 1

[opensuse-ru] Webpin: Package Search from the Web or from
by "Сергей А. Андросов " 17 Jan '08

17 Jan '08

Webpin - это просто бомба, а не очередное приложение :) Интересно только, можно ли в CLI версии получить прямые ссылки на все найденые пакеты. (-u даёт только на репозитарий) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

1 0

[opensuse-ru] Проблема с видео...
by zwey+ 13 Jan '08

13 Jan '08

Проблема с воспроизведением фильмов. При включении фильма экран как бы затянут зеленой "пеленой", в каком бы проигрывателе я бы не включал его, кафейн или мплеер. Раньше стоял 3D рабочий стол Compiz fUsion и было все нормально, но потом все эти эффекты малость поднадоели я и переключил все на обычный рабочий стол, после этого и появилась эта проблема. Если включаю 3D рабочий стол то все нормально, выключаю опять нет никакой картинки. OpenSuSE 10.3 32x битная. Все ставил с сайта opensuse.org методом в один клик. Не знаю даже в какую сторону копать.... -- С уважением zwey+ e-mail:hell11net@mail.ru Jabber ID: zwey(a)jabber.ru http://hell11.net --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

1 0

[opensuse-ru] Откуда можно обновить yast?
by Ганьков Андрей 12 Jan '08

12 Jan '08

Есть проблема, некоторые окна в графическом ясте под gnome, реально глючат, хотел сообщить об этих ошибках на баг трекер, но нашёл там уже созданные, баги с проблемами как у меня. При этом, самое интересное что большинство из них значатся как исправленные. Подождал месяц может больше, но обновления так и не появились, не через стандартное обновление(установка патчей) и так же в репозиториях не появились более новые версии пакетов Yast-а. Подскажите пожалуйста где собственно эти исправления, как их можно установить и где найти? Или я что то опять неправильно понял. У меня похоже времен релиза 10.3 yast так не разу и не обновился. -- Gankov Andrey Mail:gankov.andrey@inbox.ru ICQ: 230-684-976 Jabber:gankov@jabber.ru Tel: +7-911-914-01-91 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

2 1

[opensuse-ru] openSUSE 11
by Litkevich Yuriy 08 Jan '08

08 Jan '08

Видели последний вариант YaST'а? http://en.opensuse.org/YaST/Development/New_Control_Center/YaST_System_Navi… Мне такой нравится :) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

2 1

Re: [opensuse-ru] Вопрос к знатокам Desktop effect
by Ганьков Андрей 07 Jan '08

07 Jan '08

Aleksandr V. Popov пишет: > Привет Андрей! > > >>> Всех с праздником! >>> >>> Люди помогите кто чем может :) >>> >>> Поставил 10.3 версию на своем новом Айсер 6292 ноуте (с Х3100 от Интел >>> на борту) а он мне шапки окон не показывает (смотрите скриншот во >>> вложении) :( >>> Эффекты просто летают только шапки пропали... >>> >>> В чем проблемма? >>> >>> Заранее благодарен! >>> >>> С уважением, >>> Александр Попов >>> >>> >> ссылка >> По этой ссылке находится описание решения твоей проблемы, если есть >> проблемы с английским обращайся, переведём. >> > > Помощь с переводом не требуется, больше наверное с тем что делать > дальше: вот запустил эту комманду все класно. Но выгрузив тот терминал > все возращается (естественно). Долго искал кудаж его прописать на > загрузку. Потом опять обратился по ссылке - вычитал что нужно запустить > ccsm но ничего это не помогло :( > > Может я что-то не то делаю? > > Заранее спасибо за помощь! > > С уважением, > Александр Попов > > > > Попробуй более простой метод, запусти compiz fusion icon, если он установлен, и там в меню попробуй поиграться с windows декораторами и windows менеджерами, у после переключения чего то из этого все заработало. -- Gankov Andrey Mail:gankov.andrey@inbox.ru ICQ: 230-684-976 Jabber:gankov@jabber.ru Tel: +7-911-914-01-91 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

1 0

[opensuse-ru] openSUSE 10.3: alsa-1.0.15 не компилируется из исходников
by Igor Kondrashkin 06 Jan '08

06 Jan '08

С Новым годом, уважаемые коллеги! Есть проблема. Пытаюсь запустить hsfmodem на своём ноутбуке Dell; разлоченный драйвер HDAшного модема лежит на делловском сайте. Ставится из .rpm пересборкой при установленном alsa-1.0.15 (на штатном 1.0.14, по общему мнению, работать не должен), предварительно надо отключить snd-hda-intel (несколько по-варварски, но делается). Скачал драйверы, компилирую точно по инструкции с alsa-project. Операционка openSUSE 10.3 32-разрядная. Вот протокол. ======================================================================================== dhcppc0:/usr/src/alsa # bunzip2 alsa-driver-1.0.15.tar.bz2 dhcppc0:/usr/src/alsa # tar -xf alsa-driver-1.0.15.tar dhcppc0:/usr/src/alsa # cd alsa-driver-1.0.15/ dhcppc0:/usr/src/alsa/alsa-driver-1.0.15 # ./configure --with-cards=hda-intel --with-sequencer=yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for ranlib... ranlib checking for a BSD-compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking whether time.h and sys/time.h may both be included... yes checking whether gcc needs -traditional... no checking for current directory... /usr/src/alsa/alsa-driver-1.0.15 checking cross compile... checking for directory with kernel source... /lib/modules/2.6.22.13-0.3-default/source checking for directory with kernel build... /lib/modules/2.6.22.13-0.3-default/build checking for kernel linux/version.h... yes checking for kernel linux/autoconf.h... yes checking for kernel version... 2.6.22.13-0.3-default checking for GCC version... Kernel compiler: Used compiler: gcc (GCC) 4.2.1 (SUSE Linux) *** NO PREDEFINED KERNEL COMPILER IS DETECTED *** Assuming the same compiler is used with the current system compiler. *** Please make sure that the same compiler version was used for building kernel. checking for built-in ALSA... no checking for existing ALSA module... yes checking for Red Hat kernel... auto checking for Red Hat kernel... no checking for SUSE kernel... auto checking for SUSE kernel... yes checking for CONFIG_EXPERIMENTAL... yes checking for kernel linux/config.h... yes checking to modify of kernel linux/kmod.h... no checking for kernel linux/utsrelease.h... yes checking for kernel linux/compiler.h... yes checking for kernel linux/pm.h... yes checking for kernel linux/spinlock.h... yes checking for kernel linux/irq.h... yes checking for kernel linux/threads.h... yes checking for kernel linux/rwsem.h... yes checking for kernel linux/gameport.h... yes checking for kernel media/v4l2-dev.h... yes checking for kernel linux/devfs_fs_kernel.h... no Creating a dummy <linux/devfs_fs_kernel.h>... checking for kernel linux/highmem.h... yes checking for kernel linux/workqueue.h... yes checking for kernel linux/dma-mapping.h... yes checking for kernel asm/hw_irq.h... yes checking for kernel linux/device.h... yes checking for kernel linux/platform_device.h... yes checking for kernel linux/isa.h... yes checking for kernel linux/jiffies.h... yes checking for kernel linux/compat.h... yes checking for kernel linux/log2.h... yes checking for kernel linux/adb.h... yes checking for kernel linux/cuda.h... yes checking for kernel linux/pmu.h... yes checking for kernel linux/moduleparam.h... yes checking for kernel linux/syscalls.h... yes checking for kernel linux/firmware.h... yes checking for kernel linux/err.h... yes checking for kernel linux/bitmap.h... yes checking for kernel linux/mutex.h... yes checking for kernel linux/latency.h... yes checking for kernel linux/kthread.h... yes checking for kernel asm/irq_regs.h... yes checking for kernel module symbol versions... yes checking for has ioport support... yes checking for PCI support in kernel... yes checking for I2C driver in kernel... module checking for I2C_POWERMAC in kernel... unknown checking for firmware loader... module checking for input subsystem in kernel... yes checking for directory to store kernel modules... /lib/modules/2.6.22.13-0.3-default/kernel/sound checking for verbose procfs... on checking for verbose printk... on checking for debug level... none checking for ISA support in kernel... yes checking for processor type... i586 checking for i386 machine type... default checking for ISA DMA API... yes checking for SMP... yes checking for Video device support in kernel... yes checking for ISA PnP driver in kernel... yes checking for PnP driver in kernel... yes checking for Kernel ISA-PnP support... yes checking for strlcpy... yes checking for snprintf... yes checking for vsnprintf... yes checking for scnprintf... yes checking for sscanf... yes checking for vmalloc_to_page... no checking for old kmod... no checking for PDE... no checking for pci_set_consistent_dma_mask... no checking for pci_dev_present... no checking for msleep... yes checking for msleep_interrupt... yes checking for msecs_to_jiffies... no checking for tty->count is the atomic type... no checking for video_get_drvdata... no checking for V4L1 layer... yes checking for io_remap_pfn_range... no checking for new io_remap_page_range... no checking for kcalloc... no checking for kstrdup... yes checking for kzalloc... no checking for create_workqueue with flags... no checking for saved_config_space in pci_dev... no checking for register_sound_special_device... no checking for driver version... 1.0.15 checking for sequencer support... yes checking for OSS/Free emulation... yes checking for OSS PCM plugin system inclusion... yes checking for RTC callback support in kernel... no checking for HPET support... yes checking for dynamic minor numbers... no checking for support of old API... yes checking for Procfs support... yes checking for USB support... yes checking for class_simple... no checking for old driver suspend/resume callbacks... no checking for removal of page-reservation for nopage/mmap... no checking for nested class_device... no checking for new IRQ handler... no checking for gfp_t... no checking for PnP suspend/resume... no checking for new unlocked/compat_ioctl... no checking for x86-compatible PC... no checking for High-Res timers... no checking for kernel PCMCIA checking for PCMCIA support... yes checking for PC9800 support in kernel... no checking for parallel port support... yes checking for power management... yes checking for which soundcards to compile driver for... hda-intel configure: creating ./config.status config.status: creating version config.status: creating Makefile.conf config.status: WARNING: Makefile.conf.in seems to ignore the --datarootdir setting config.status: creating snddevices config.status: creating utils/alsa-driver.spec config.status: creating utils/buildrpm config.status: creating toplevel.config config.status: creating utils/alsasound config.status: creating utils/alsasound.posix config.status: creating include/pci_ids_compat.h config.status: creating include/i2c-id_compat.h config.status: creating include/config.h config.status: creating include/config1.h config.status: creating include/version.h config.status: include/version.h is unchanged config.status: creating include/autoconf-extra.h Hacking autoconf.h... dhcppc0:/usr/src/alsa/alsa-driver-1.0.15 # make if [ ! -d include/sound -a ! -L include/sound ]; then \ ln -sf ../alsa-kernel/include include/sound ; \ fi cp -puvf include/version.h include/sound/version.h `include/version.h' -> `include/sound/version.h' make dep make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/acore' copying file alsa-kernel/core/info.c patching file info.c Hunk #8 succeeded at 535 with fuzz 2. copying file alsa-kernel/core/pcm.c patching file pcm.c copying file alsa-kernel/core/pcm_native.c patching file pcm_native.c Hunk #5 succeeded at 2842 (offset 6 lines). Hunk #6 succeeded at 2862 (offset 6 lines). Hunk #7 succeeded at 2892 (offset 6 lines). Hunk #8 succeeded at 2919 (offset 6 lines). Hunk #9 succeeded at 2935 (offset 6 lines). Hunk #10 succeeded at 2965 (offset 6 lines). Hunk #11 succeeded at 3051 (offset 6 lines). Hunk #12 succeeded at 3070 (offset 6 lines). Hunk #13 succeeded at 3089 (offset 6 lines). Hunk #14 succeeded at 3122 (offset 6 lines). Hunk #15 succeeded at 3155 (offset 6 lines). Hunk #16 succeeded at 3188 (offset 6 lines). Hunk #17 succeeded at 3217 (offset 6 lines). Hunk #18 succeeded at 3238 (offset 6 lines). Hunk #19 succeeded at 3256 (offset 6 lines). Hunk #20 succeeded at 3276 (offset 6 lines). Hunk #21 succeeded at 3288 (offset 6 lines). Hunk #22 succeeded at 3320 (offset 6 lines). Hunk #23 succeeded at 3386 (offset 6 lines). Hunk #24 succeeded at 3415 (offset 6 lines). Hunk #25 succeeded at 3456 (offset 6 lines). Hunk #26 succeeded at 3606 (offset 6 lines). copying file alsa-kernel/core/control.c patching file control.c copying file alsa-kernel/core/hwdep.c patching file hwdep.c copying file alsa-kernel/core/init.c patching file init.c Hunk #2 succeeded at 228 (offset 5 lines). Hunk #3 succeeded at 254 with fuzz 2 (offset 5 lines). copying file alsa-kernel/core/rawmidi.c patching file rawmidi.c Hunk #2 succeeded at 1289 (offset -1 lines). Hunk #3 succeeded at 1373 (offset -1 lines). copying file alsa-kernel/core/sound.c patching file sound.c copying file alsa-kernel/core/timer.c patching file timer.c Hunk #3 succeeded at 1904 (offset 9 lines). Hunk #4 succeeded at 1949 (offset 9 lines). copying file alsa-kernel/core/memalloc.c patching file memalloc.c Hunk #12 succeeded at 714 (offset -1 lines). Hunk #13 succeeded at 724 (offset -1 lines). Hunk #14 succeeded at 758 (offset -1 lines). copying file alsa-kernel/core/misc.c patching file misc.c Hunk #2 succeeded at 30 (offset -1 lines). Hunk #3 succeeded at 96 (offset -1 lines). make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/acore/ioctl32' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/acore/ioctl32' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/acore/oss' copying file alsa-kernel/core/oss/mixer_oss.c patching file mixer_oss.c copying file alsa-kernel/core/oss/pcm_oss.c patching file pcm_oss.c Hunk #2 succeeded at 2590 (offset 33 lines). Hunk #3 succeeded at 2641 (offset 33 lines). Hunk #4 succeeded at 2764 (offset 33 lines). Hunk #5 succeeded at 2947 (offset 33 lines). Hunk #6 succeeded at 3074 (offset 33 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/acore/oss' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/acore/seq' copying file alsa-kernel/core/seq/seq.c patching file seq.c Hunk #1 succeeded at 57 (offset 6 lines). copying file alsa-kernel/core/seq/seq_clientmgr.c patching file seq_clientmgr.c copying file alsa-kernel/core/seq/seq_memory.c patching file seq_memory.c Hunk #3 succeeded at 248 (offset 3 lines). make[4]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/acore/seq/instr' make[4]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/acore/seq/instr' make[4]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/acore/seq/oss' copying file alsa-kernel/core/seq/oss/seq_oss.c patching file seq_oss.c make[4]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/acore/seq/oss' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/acore/seq' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/acore' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/i2c' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/i2c/l3' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/i2c/l3' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/i2c/other' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/i2c/other' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/i2c' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/drivers' copying file alsa-kernel/drivers/mts64.c patching file mts64.c Hunk #1 succeeded at 830 (offset -8 lines). Hunk #2 succeeded at 1085 (offset -8 lines). copying file alsa-kernel/drivers/portman2x4.c patching file portman2x4.c make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/mpu401' copying file alsa-kernel/drivers/mpu401/mpu401.c patching file mpu401.c make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/mpu401' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/opl3' copying file alsa-kernel/drivers/opl3/opl3_lib.c patching file opl3_lib.c Hunk #1 succeeded at 435 (offset 2 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/opl3' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/opl4' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/opl4' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/pcsp' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/pcsp' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/vx' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/drivers/vx' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/drivers' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/ad1816a' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/ad1816a' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/ad1848' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/ad1848' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/cs423x' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/cs423x' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/es1688' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/es1688' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/gus' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/gus' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/msnd' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/msnd' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/opti9xx' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/opti9xx' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/sb' copying file alsa-kernel/isa/sb/sb16_csp.c patching file sb16_csp.c Hunk #1 succeeded at 730 (offset 7 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/sb' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/isa/wavefront' copying file alsa-kernel/isa/wavefront/wavefront_fx.c patching file wavefront_fx.c copying file alsa-kernel/isa/wavefront/wavefront_synth.c patching file wavefront_synth.c make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa/wavefront' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/isa' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/synth' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/synth/emux' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/synth/emux' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/synth' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci' copying file alsa-kernel/pci/ad1889.c patching file ad1889.c Hunk #1 succeeded at 53 with fuzz 2 (offset 1 line). copying file alsa-kernel/pci/atiixp.c patching file atiixp.c copying file alsa-kernel/pci/atiixp_modem.c patching file atiixp_modem.c copying file alsa-kernel/pci/bt87x.c patching file bt87x.c Hunk #1 succeeded at 847 (offset 10 lines). Hunk #2 succeeded at 1001 (offset 10 lines). copying file alsa-kernel/pci/cmipci.c patching file cmipci.c Hunk #1 succeeded at 3072 (offset 137 lines). Hunk #2 succeeded at 3367 (offset 149 lines). copying file alsa-kernel/pci/ens1370.c patching file ens1370.c Hunk #1 succeeded at 2118 (offset -32 lines). Hunk #2 succeeded at 2494 (offset -32 lines). copying file alsa-kernel/pci/fm801.c patching file fm801.c copying file alsa-kernel/pci/intel8x0.c patching file intel8x0.c Hunk #2 succeeded at 704 (offset 3 lines). Hunk #3 succeeded at 715 (offset 3 lines). Hunk #4 succeeded at 3094 (offset 83 lines). copying file alsa-kernel/pci/maestro3.c patching file maestro3.c Hunk #1 succeeded at 2748 (offset 2 lines). Hunk #2 succeeded at 2934 (offset 2 lines). copying file alsa-kernel/pci/via82xx.c patching file via82xx.c Hunk #1 succeeded at 2427 (offset -7 lines). Hunk #2 succeeded at 2437 (offset -7 lines). Hunk #3 succeeded at 2452 (offset -7 lines). Hunk #4 succeeded at 2463 (offset -7 lines). Hunk #5 succeeded at 2474 (offset -7 lines). Hunk #6 succeeded at 2557 (offset -7 lines). copying file alsa-kernel/pci/via82xx_modem.c patching file via82xx_modem.c make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ac97' copying file alsa-kernel/pci/ac97/ac97_codec.c patching file ac97_codec.c Hunk #2 succeeded at 1911 (offset 7 lines). Hunk #3 succeeded at 1923 (offset 7 lines). Hunk #4 succeeded at 1947 (offset 7 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ac97' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ali5451' copying file alsa-kernel/pci/ali5451/ali5451.c patching file ali5451.c Hunk #1 succeeded at 2209 (offset -8 lines). Hunk #2 succeeded at 2379 (offset -8 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ali5451' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/asihpi' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/asihpi' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/au88x0' copying file alsa-kernel/pci/au88x0/au88x0.c patching file au88x0.c Hunk #2 succeeded at 342 (offset 1 line). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/au88x0' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ca0106' copying file alsa-kernel/pci/ca0106/ca0106_main.c patching file ca0106_main.c Hunk #1 succeeded at 169 (offset 4 lines). Hunk #2 succeeded at 1361 (offset 44 lines). Hunk #3 succeeded at 1730 (offset 49 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ca0106' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/cmi8788' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/cmi8788' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/cs46xx' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/cs46xx' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/cs5535audio' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/cs5535audio' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/echoaudio' copying file alsa-kernel/pci/echoaudio/echoaudio.c patching file echoaudio.c Hunk #1 succeeded at 1897 (offset -29 lines). Hunk #2 succeeded at 1960 (offset -29 lines). copying file alsa-kernel/pci/echoaudio/darla20.c patching file darla20.c Hunk #2 succeeded at 107 (offset 2 lines). copying file alsa-kernel/pci/echoaudio/darla24.c patching file darla24.c Hunk #2 succeeded at 114 (offset 2 lines). copying file alsa-kernel/pci/echoaudio/echo3g.c patching file echo3g.c Hunk #2 succeeded at 128 (offset 4 lines). copying file alsa-kernel/pci/echoaudio/gina20.c patching file gina20.c Hunk #2 succeeded at 111 (offset 2 lines). copying file alsa-kernel/pci/echoaudio/gina24.c patching file gina24.c Hunk #2 succeeded at 135 (offset 6 lines). copying file alsa-kernel/pci/echoaudio/indigo.c patching file indigo.c Hunk #2 succeeded at 113 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/indigodj.c patching file indigodj.c Hunk #2 succeeded at 113 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/indigoio.c patching file indigoio.c Hunk #2 succeeded at 114 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/layla20.c patching file layla20.c Hunk #2 succeeded at 121 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/layla24.c patching file layla24.c Hunk #2 succeeded at 133 (offset 6 lines). copying file alsa-kernel/pci/echoaudio/mia.c patching file mia.c Hunk #2 succeeded at 126 (offset 3 lines). copying file alsa-kernel/pci/echoaudio/mona.c patching file mona.c Hunk #2 succeeded at 144 (offset 9 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/echoaudio' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/emu10k1' copying file alsa-kernel/pci/emu10k1/emu10k1_main.c patching file emu10k1_main.c copying file alsa-kernel/pci/emu10k1/emu10k1x.c patching file emu10k1x.c Hunk #2 succeeded at 1628 (offset -7 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/emu10k1' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/hda' copying file alsa-kernel/pci/hda/hda_codec.c patching file hda_codec.c Hunk #2 succeeded at 278 (offset 21 lines). Hunk #3 succeeded at 316 (offset 21 lines). Hunk #4 succeeded at 331 (offset 21 lines). Hunk #5 succeeded at 347 (offset 21 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/hda' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ice1712' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ice1712' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/korg1212' copying file alsa-kernel/pci/korg1212/korg1212.c patching file korg1212.c Hunk #1 succeeded at 2342 (offset -1 lines). Hunk #2 succeeded at 2503 (offset -1 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/korg1212' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/mixart' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/mixart' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/nm256' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/nm256' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/pcxhr' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/pcxhr' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/pdplus' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/pdplus' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/riptide' copying file alsa-kernel/pci/riptide/riptide.c patching file riptide.c Hunk #1 succeeded at 1279 (offset 10 lines). Hunk #2 succeeded at 2236 (offset 10 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/riptide' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/rme9652' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/rme9652' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/trident' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/trident' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/vx222' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/vx222' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ymfpci' copying file alsa-kernel/pci/ymfpci/ymfpci_main.c patching file ymfpci_main.c Hunk #2 succeeded at 2045 (offset -8 lines). Hunk #3 succeeded at 2067 (offset -8 lines). Hunk #4 succeeded at 2407 (offset -8 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci/ymfpci' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pci' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/aoa' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/codecs' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/codecs' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/core' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/core' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/fabrics' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/fabrics' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/soundbus' make[4]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/soundbus/i2sbus' make[4]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/soundbus/i2sbus' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/aoa/soundbus' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/aoa' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/soc' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/soc/at91' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/soc/at91' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/soc/codecs' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/soc/codecs' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/soc/pxa' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/soc/pxa' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/soc/s3c24xx' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/soc/s3c24xx' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/soc/sh' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/soc/sh' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/soc' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/usb' copying file alsa-kernel/usb/usbaudio.c patching file usbaudio.c Hunk #3 succeeded at 659 with fuzz 2 (offset -10 lines). Hunk #4 succeeded at 686 with fuzz 2 (offset -10 lines). Hunk #5 succeeded at 767 (offset -10 lines). Hunk #6 succeeded at 782 (offset -10 lines). Hunk #7 succeeded at 1160 (offset -10 lines). Hunk #8 succeeded at 2082 (offset 3 lines). Hunk #9 succeeded at 2101 (offset 3 lines). Hunk #10 succeeded at 2118 (offset 3 lines). Hunk #11 succeeded at 2675 (offset 13 lines). Hunk #12 succeeded at 2747 (offset 13 lines). Hunk #13 succeeded at 3035 (offset 17 lines). Hunk #14 succeeded at 3106 (offset 17 lines). Hunk #15 succeeded at 3227 (offset 69 lines). Hunk #16 succeeded at 3245 (offset 69 lines). Hunk #17 succeeded at 3259 (offset 69 lines). Hunk #18 succeeded at 3272 (offset 69 lines). Hunk #19 succeeded at 3476 (offset 77 lines). Hunk #20 succeeded at 3569 (offset 79 lines). Hunk #21 succeeded at 3706 (offset 78 lines). Hunk #22 succeeded at 3727 (offset 78 lines). Hunk #23 succeeded at 3748 (offset 78 lines). copying file alsa-kernel/usb/usbmidi.c patching file usbmidi.c Hunk #2 succeeded at 226 (offset 1 line). Hunk #3 succeeded at 250 (offset 1 line). Hunk #4 succeeded at 343 (offset 1 line). Hunk #5 succeeded at 1450 (offset 88 lines). Hunk #6 succeeded at 1798 (offset 92 lines). copying file alsa-kernel/usb/usbmixer.c patching file usbmixer.c Hunk #3 succeeded at 1725 (offset -1 lines). Hunk #4 succeeded at 1774 (offset -1 lines). Hunk #5 succeeded at 1795 (offset -1 lines). make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/usb/caiaq' copying file alsa-kernel/usb/caiaq/caiaq-audio.c patching file caiaq-audio.c copying file alsa-kernel/usb/caiaq/caiaq-device.c patching file caiaq-device.c Hunk #1 succeeded at 106 (offset 6 lines). Hunk #2 succeeded at 313 (offset 14 lines). make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/usb/caiaq' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/usb/usx2y' copying file alsa-kernel/usb/usx2y/usX2Yhwdep.c patching file usX2Yhwdep.c Hunk #3 succeeded at 63 with fuzz 2. copying file alsa-kernel/usb/usx2y/usbusx2y.c patching file usbusx2y.c copying file alsa-kernel/usb/usx2y/usbusx2yaudio.c patching file usbusx2yaudio.c Hunk #10 succeeded at 1057 (offset -1 lines). copying file alsa-kernel/usb/usx2y/usx2yhwdeppcm.c patching file usx2yhwdeppcm.c make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/usb/usx2y' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/usb' make[2]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pcmcia' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pcmcia/pdaudiocf' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pcmcia/pdaudiocf' make[3]: Entering directory `/usr/src/alsa/alsa-driver-1.0.15/pcmcia/vx' make[3]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pcmcia/vx' make[2]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15/pcmcia' make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.15' make -C /lib/modules/2.6.22.13-0.3-default/source SUBDIRS=/usr/src/alsa/alsa-driver-1.0.15 O=/lib/modules/2.6.22.13-0.3-default/build CPP="gcc -E" CC="gcc" modules make[1]: Entering directory `/usr/src/linux-2.6.22.13-0.3' CC [M] /usr/src/alsa/alsa-driver-1.0.15/acore/hwdep.o In file included from /usr/src/alsa/alsa-driver-1.0.15/include/sound/driver.h:46, from /usr/src/alsa/alsa-driver-1.0.15/acore/hwdep.c:22: /usr/src/alsa/alsa-driver-1.0.15/include/adriver.h:814: error: static declaration of ‘jiffies_to_msecs’ follows non-static declaration /usr/src/linux-2.6.22.13-0.3/include/linux/jiffies.h:264: error: previous declaration of ‘jiffies_to_msecs’ was here /usr/src/alsa/alsa-driver-1.0.15/include/adriver.h:833: error: static declaration of ‘msecs_to_jiffies’ follows non-static declaration /usr/src/linux-2.6.22.13-0.3/include/linux/jiffies.h:266: error: previous declaration of ‘msecs_to_jiffies’ was here In file included from /usr/src/alsa/alsa-driver-1.0.15/include/adriver.h:930, from /usr/src/alsa/alsa-driver-1.0.15/include/sound/driver.h:46, from /usr/src/alsa/alsa-driver-1.0.15/acore/hwdep.c:22: /usr/src/linux-2.6.22.13-0.3/include/linux/pci.h:552: error: expected identifier or ‘(’ before numeric constant In file included from /usr/src/alsa/alsa-driver-1.0.15/include/sound/driver.h:46, from /usr/src/alsa/alsa-driver-1.0.15/acore/hwdep.c:22: /usr/src/alsa/alsa-driver-1.0.15/include/adriver.h: In function ‘snd_pci_orig_save_state’: /usr/src/alsa/alsa-driver-1.0.15/include/adriver.h:1172: error: too many arguments to function ‘pci_save_state’ /usr/src/alsa/alsa-driver-1.0.15/include/adriver.h: In function ‘snd_pci_orig_restore_state’: /usr/src/alsa/alsa-driver-1.0.15/include/adriver.h:1176: error: too many arguments to function ‘pci_restore_state’ make[4]: *** [/usr/src/alsa/alsa-driver-1.0.15/acore/hwdep.o] Error 1 make[3]: *** [/usr/src/alsa/alsa-driver-1.0.15/acore] Error 2 make[2]: *** [_module_/usr/src/alsa/alsa-driver-1.0.15] Error 2 make[1]: *** [modules] Error 2 make[1]: Leaving directory `/usr/src/linux-2.6.22.13-0.3' make: *** [compile] Error 2 dhcppc0:/usr/src/alsa/alsa-driver-1.0.15 # ======================================================================================= Коллеги! Кто-нибудь с чем-нибудь подобным встречался? Если да, то не подскажете, что и где подправить, чтобы компиляция прошла? Или это баг в alsa-drivers? Заранее благодарен, И.Кондрашкин. --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

3 2

[opensuse-ru] openSUSE 10.3: alsa-1.0.15 не компилируется из n
by Igor Kondrashkin 04 Jan '08

04 Jan '08

Найди школьных друзей http://r.mail.ru/cln3712/my.mail.ru/?from_commercial=14 --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-ru+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-ru+help(a)opensuse.org

1 0

[opensuse-ru] Samba 3
by Dima Spodarets 04 Jan '08

04 Jan '08

Всем привет. Настраиваю самбу, но столкнулся с проблемой медленной скорости записи с клиентских машин на файловый сервер где стоит самба. С файлового сервера на клиенты скорость ~ 1-2 мбит\с С клиентов на файловый сервер ~ 12 мбит\с Конфиг: # Defining domain name, hostname #################################################### [global] passwd chat = "Changing password for*\nNew password*" %n\n "*Retype new password*" %n\n" obey pam restrictions = yes preserve case = yes delete user from group script = /usr/sbin/smbldap-groupmod -x %g %u time server = Yes #nt acl support = yes netbios name = PDC ldap passwd sync = Yes printing = cups idmap domains = DM logon script = logon.bat dos charset = CP866 debug level = 10 idmap config dm:range = 10000 - 50000 security = user short preserve case = yes add machine script = /usr/sbin/smbldap-useradd -w %u dont descend = /proc,/dev,/etc,/lib,/lost+found,/initrd delete user script = /usr/sbin/smbldap-userdel %u log file = /var/log/samba/%m.log guest account = nobody ldap user suffix = ou=Users idmap alloc config:ldap_url = ldap://localhost/ socket options = SO_KEEPALIVE TCP_NODELAY IPTOS_LOWDELAY SO_SNDBUF=262144 SO_RCVBUF=262144 delete group script = /usr/sbin/smbldap-groupdel %g idmap config dm:default = yes domain master = Yes passdb backend = ldapsam:ldap://127.0.0.1 case sensitive = no ldap suffix = dc=dm,dc=local idmap config dm:backend = ldap set primary group script = /usr/sbin/smbldap-usermod -g %g %u pam password change = No domain logons = Yes idmap alloc config:ldap_user_dn = cn=Administrator,dc=dm,dc=local display charset = KOI8-R name resolve order = wins bcast hosts enable privileges = yes #posix locking = yes #strict locking = no idmap config dm:ldap_user_dn = cn=root,ou=Users,dc=dm,dc=local show add printer wizard = yes passwd program = /usr/sbin/smbldap-passwd -u %u local master = Yes idmap alloc config:ldap_base_dn = ou=Idmap,dc=dm,dc=local workgroup = DM os level = 255 ldap admin dn = cn=Administrator,dc=dm,dc=local printcap name = cups getwd cache = yes log level = 256 idmap alloc backend = ldap add group script = /usr/sbin/smbldap-groupadd -p %g idmap config dm:ldap_url = ldap://localhost/ add user to group script = /usr/sbin/smbldap-groupmod -m %g %u mangling method = hash2 logon drive = H: username map = /etc/samba/smbusers map to guest = Bad User encrypt passwords = yes logon home = \\%L\%U keepalive = 10 wins support = true ldap group suffix = ou=Groups ldap machine suffix = ou=Computers server string = SuSE DC password server = localhost idmap alloc config:range = 10000 - 50000 logon path = \\%L\Profiles\%U add user script = /usr/sbin/smbldap-useradd -m %u idmap config dm:ldap_base_dn = ou=Idmap,dc=dm,dc=local unix charset = KOI8-R # Path to IDEALX scripts #################################################### # Specifying ldapsam backend database #################################################### # Specifying printing subsystem #################################################### # Various other directives ( man smb.conf ) #################################################### #obey pam restrictions = Yes # OpenLDAP stuff is defined here ################################################### #map acl inherit = Yes #ldap ssl = no # Defining logging facility #################################################### # Defining printers #################################################### [printers] comment = All Printers path = /var/spool/samba read only = Yes guest ok = Yes printable = Yes browseable = No # Defining printers #################################################### [print$] path = /var/lib/samba/drivers/ guest ok = No browseable = Yes read only = Yes valid users = @"Print Operators" write list = @"Print Operators" create mask = 0664 directory mask = 0775 # Defining network logon service #################################################### [netlogon] comment = NLService path = /var/lib/samba/netlogon browseable = No read only = yes [homes] comment = Home Directories browsable = no read only = no writeable = yes create mask = 0600 directory mask = 0700 # Defining profile share ( for roaming profiles ) #################################################### [profiles] profile acls = yes csc policy = disable browseable = no writeable = yes path = /var/lib/samba/profiles create mask = 0600 directory mask = 0700 comment = Roaming Profiles public = yes [test] writeable = yes write list = @"Domain Users",@"Domain Admins" path = /srv/samba/test [1cbase] writeable = yes path = /srv/samba/1cbase read only = no writeable = yes create mask = 0777 directory mask = 0777 [firms] writeable = yes path = /srv/samba/firms write list = @"Domain Users",@"Domain Admins" create mask = 0777 directory mask = 0777 Кто что может посоветовать для увеличения скорости передачи данных? -- С уважением, Дмитрий Сподарец

1 0