Bonjour !
Regarde par ici :
http://www.alionet.org/index.php?showtopic=20938
quelqu'un a déjà eu le problème et l'a réglé apparemment !
Il faudrait donc lancer la commande :
sudo /usr/sbin/install_bcm43xx_firmware
er redémarrer.
L'avais-tu fait ?
Guillaume
Selon "Michel G. Maria-Sube"
Bonjour,
Depuis que j'ai mis à jour ma version 10.2 de Suse en 11.0, je contate que ma configuration reseau sans-fil ne marche plus du tout; avec la 10.2 j'utilisais ndiswrapper qui me creait l'interface eth0.
A present, quand je fais ifconfig -a j'ai la réponsse:
eth1 Link encap:Ethernet HWaddr 00:16:36:24:FC:51 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interruption:18
lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:72 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:4664 (4.5 Kb) TX bytes:4664 (4.5 Kb)
pan0 Link encap:Ethernet HWaddr 0E:2C:6C:66:E9:9D UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:14:A4:3C:E2:52 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wmaster0 Link encap:UNSPEC HWaddr 00-14-A4-3C-E2-52-00-00-00-00-00-00-00-00-00-00 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
je ne sais pas à quoi sert wmaster (est ce bluetooth??), ni pan0, eth1 sert pour le periperique ethernet, reste wlan0 qui est reconnu comme adresse dynamique pour le sans-fil. Mais ce qui est vraiment etrange c'est que si j'efface la configuration de cette interface sous Yast, wlan0 reste toujours presente dans la liste ifconfig -a!!
Apres cela si je reinstalle le module ndiswrapper en faisant:
ndiswrapper -i <nom-du-fichier>.inf puis:
modprobe ndiswrapper, j'obtiens: installing bcmwl5 ... forcing parameter IBSSGMode from 0 to 2 mgms1:/home/mgms # modprobe ndiswrapper mgms1:/home/mgms # lsmod|grep ndiswrapper ndiswrapper 270016 0 usbcore 188248 5 ndiswrapper,hci_usb,ehci_hcd,ohci_hcd
Ensuite, je configure l'interface wlan0 soius Yast en utisant la methode ifup et je reporte les memes parametres avec iwconfig:
ifdown wlan0 wlan0 mgms1:/home/mgms # ifup wlan0 wlan0 command 'iwconfig wlan0 nick mgms1' returned Error for wireless request "Set Nickname" (8B1C) : SET failed on device wlan0 ; Operation not supported. Starting DHCP Client Daemon on wlan0... . . . . . no IP address yet... backgrounding. interface wlan0 is not up mgms1:/home/mgms # iwconfig wlan0 rate 11 Error for wireless request "Set Bit Rate" (8B20) : SET failed on device wlan0 ; Invalid argument. mgms1:/home/mgms # iwconfig wlan0 essid Wireless mgms1:/home/mgms # iwconfig wlan0 key open mgms1:/home/mgms # iwconfig wlan0 enc s:34ze45aZ43bbP mgms1:/home/mgms # dhcpcd wlan0 err, wlan0: ioctl SIOCSIFFLAGS: No such file or directory
Et je n'arrive toujoiurs pas a e connecter Des suggestions?? merci d'avance Michel --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-fr+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-fr+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-fr+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-fr+help@opensuse.org