----- Original Message ----- From: "Cristianos Cubanos" Sent: Thursday, November 04, 2004 3:12 AM Subject: Re: [suse-linux-s] windowsxpy suse En SuSE hacer lo que quieres es muy facil e intuitivo gracias al YaST2. Primero, tienes aqui dos temas en uno solo, a saber: 1) poner la Conexión compartida 2) compartir recursos. Para el primero de ellos compartir conexiones, supongo que las dos maquinas ya se ven entre si en una red interna (si haces un ping de una cualquiera de ellas la otra responde y vicecersa) de no ser así seria el primer paso configurar la red, fijate que no te hablo de ver recursos compartidos, sino de comunicación basica para saber que la red está trabajando: [...] Ya encauzo el tema, el ordenador con suse y el ordenador con winxp no se ven en la red interna. hago ping de uno a otro y no me sale nada. es como si la red interna no exisitiera. ¿como configuro la red interna? gruacias
El Jueves, 4 de Noviembre de 2004 03:23 AM, David Galindo Méndez escribió:
[...]
Ya encauzo el tema, el ordenador con suse y el ordenador con winxp no se ven en la red interna. hago ping de uno a otro y no me sale nada. es como si la red interna no exisitiera. ¿como configuro la red interna?
gruacias
En tu correo anterior decías: "...asi que mantengo mi winxp en el primer PC, para dar servicio de Internet y de archivos compartidos al segundo pc..." así que imaginé que la red te trabajaba.. Entonces continuamos con las suposiciones, supongo que el cableado está bien y que los dos sistemas reconocen y levantan las tarjetas de red... ¿Como saberlo? 1) En SuSE como root teclea en consola: ifconfig y en la respuesta busca algo que haga mención a eth0... Si no hay mención entonces no creo que esté reconocido el Hardware... de ser así pregunta en la lista. 2) en WinXP en el emulador de DOS haz ipconfig, y mira en el resultado que esté la tarjeta de red.de no ser así, consigue los drivers o habla con Microsoft (R). También queda la opción de ver si los LED de ambas tarjetas están encendidos la gran mayoría de las Ethernet los traen... Si están activas ambas interfaces de red asignales una dirección IP estática a cada una de ellas: por ejemplo, (las escogí aleatoriamente) maquina SuSE 192.168.1.50 y maquina winXP 192.168.1.51 ¿Como se hace? 1) En SuSE el amigo YaST es la respuesta, YaST > Dispositivos de red > tarjeta de red. 2) Escoges la tarjeta de red y das en cambiar o en configurar, depende de donde te aparezca, ya que puede que aunque tu no la configuraras SuSE si lo hiciera... 3) En la configuración de la dirección de red escoges la estática (no DHCP) y das la IP que te mencioné arriba o la que escojas, y la mascara de subred la fijas a 255.255.255.0. Entras en el botón "nombre del ordenador y servidor de nombres" y ahí dentro das el nombre de tu maquina y el nombre del dominio. ejemplo: Nombre: pepe dominio: micasa, aceptar y para afuera. Después finalizar y ya... En XP, como sabes moverte ( te lo explique en el correo anterior) solo te diré que cambies en la interfaz de red el protocolo TCP/IP para que tenga la IP que te misioné más arriba, la mascara igual que la del SuSE y como gateway la IP del SuSE. Despues que hagas esto reinicia el XP y prueba hacer un ping de una maquina a la otra: desde xp: ping 192.168.1.50 desde SuSE: ping 192.168.1.51 (aquí despues de tener algunas respuestas das CTRL+C si no será interminable la lista) En ambos casos debes tener respuestas similares a esta: PING 192.168.1.50 (192.168.1.50) 56(84) bytes of data. 64 bytes from 169.254.194.191: icmp_seq=1 ttl=128 time=0.253 ms 64 bytes from 169.254.194.191: icmp_seq=2 ttl=128 time=0.238 ms 64 bytes from 169.254.194.191: icmp_seq=3 ttl=128 time=0.235 ms 64 bytes from 169.254.194.191: icmp_seq=4 ttl=128 time=0.241 ms 64 bytes from 169.254.194.191: icmp_seq=5 ttl=128 time=0.236 ms --- 169.254.194.191 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4000ms rtt min/avg/max/mdev = 0.235/0.240/0.253/0.018 ms Si las obtienes entonces continua con los pasos del correo anterior, si no revisa bien los pasos que has dado, con calma y si todo está correcto tira para acá.. Saludos, Xtiano
participants (2)
-
Cristianos Cubanos
-
David Galindo Méndez