El jue., 7 mar. 2019 a las 19:49, Carlos E. R.
(
On 07/03/2019 22.52, Juan Erbes wrote:
Hola gente!
Tengo un disco duro de 2 TB, con 2 particiones, una de 40 GB (demasiado chica) que uso como raiz con Tumbleweed y otra de aproximadamente 1.8 TB que utilizo como /home.
En algunas oportunidades tarda en arrancar cuando lo detecta la bios y como tiene alrededor de 6 años de uso (no continuo), con 5526 horas de uso estaba viendo de reemplazarlo y compré ayer otro disco de 2 TB, http://products.wdc.com/library/SpecSheet/ENG/2879-701338.pdf
Pero que la garantía de Western Digital expiró en el año 2016 y el vendedor local me da solamente 6 meses de garantía. Aparentemente se trata de un stock fabricado para Dell, que no fueron utilizados y salieron ahora al mercado con la garantia del vendedor: https://www.amazon.com/Dell-2G4HM-2TB-WD2003FYYS-18W0B0/dp/B007NIE1F2
Este es el resultado de smartctl -a /dev/sdb
Está mal el valor de Spin_Up_Time?
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 71 3 Spin_Up_Time 0x0007 128 128 024 Pre-fail Always - 295 (Average 295)
Es imposible de saber, salvo que tengas datos del fabricante.
Mira a las columnas "VALUE WORST THRESH". El "valor" es lo que tiene ahora, y cuando empeora baja. Se considera malo cuando llega a "THRESH", que es 24... luego está muy bien. Y nunca ha bajado de 128.
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.20.12-1-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA200
Tengo que reformatear el texto para leerlo bien.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 71 3 Spin_Up_Time 0x0007 128 128 024 Pre-fail Always - 295 (Average 295) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2425 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 5526
No es nuevo. 5526 horas. Luego este es tu disco en uso.
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2255 192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 2425 193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 2425 194 Temperature_Celsius 0x0002 139 139 000 Old_age Always - 43 (Min/Max 11/47) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1 No Errors Logged
Se me dió por realizar el test con el otro disco, y a pesar de ser más nuevo, parece estar peor:
smartctl -a /dev/sda smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.20.12-1-default] (SUSE RPM) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-60WN4A0 Serial Number: WD-WCC6Y1CPU7TZ LU WWN Device Id: 5 0014ee 2b9522480 Firmware Version: 01.01A01 User Capacity: 1.000.204.886.016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Mar 7 18:40:53 2019 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
Tengo que reformatear el texto para leerlo bien.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 174 168 021 Pre-fail Always - 2291 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1021 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2429
El disco no es nuevo, tiene 2429 horas de uso.
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1021 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 097 000 Old_age Always - 6 188 Command_Timeout 0x0032 100 001 000 Old_age Always - 25770197364 190 Airflow_Temperature_Cel 0x0022 059 056 040 Old_age Always - 41 (Min/Max 29/41) 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 175 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1979 194 Temperature_Celsius 0x0022 102 099 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
cero, bien.
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 183 000 Old_age Always - 446 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
¿Consejos?
Que no es nuevo... Es de segunda mano.
Los 2 son usados, el de 2 TB Toshiba, es mucho mas viejo que el Western digital de 1 TB, que lo cambié hace un par de años. El "nuevo", es un WD RE4 Enterprise que viene con la etiqueta Dell (como el aviso de Amazon) y su garantía caducó en el año 2016 (año de fabricación 2011), que el vendedor local vende como "sin uso".
Hazle el test largo, a ver.
Por ahora, veré si conecto el disco "nuevo" para ver que realmente me de cero horas de uso.
No se pueden resetear los valores, que yo sepa. Afortunadamente.
No funciona el disco "nuevo". Resultado de dmesg: [ 249.396252] ata5: softreset failed (device not ready) [ 249.396258] ata5: limiting SATA link speed to 1.5 Gbps [ 254.568136] ata5: softreset failed (device not ready) [ 254.568159] ata5: reset failed, giving up [ 264.584028] ata5: softreset failed (device not ready) [ 274.607886] ata5: softreset failed (device not ready) [ 286.063718] ata5: link is slow to respond, please be patient (ready=0) [ 309.619366] ata5: softreset failed (device not ready) [ 309.619373] ata5: limiting SATA link speed to 1.5 Gbps [ 314.827281] ata5: softreset failed (device not ready) [ 314.827287] ata5: reset failed, giving up [ 324.839141] ata5: softreset failed (device not ready) [ 334.898994] ata5: softreset failed (device not ready) [ 345.866828] ata5: link is slow to respond, please be patient (ready=0) [ 369.954451] ata5: softreset failed (device not ready) [ 369.954458] ata5: limiting SATA link speed to 1.5 Gbps [ 375.170365] ata5: softreset failed (device not ready) [ 375.170370] ata5: reset failed, giving up [ 385.230214] ata5: softreset failed (device not ready) [ 390.950142] ata5: SATA link down (SStatus 0 SControl 300) 5.500 horas de uso para el disco que uso para /home (Toshiba), creo que todavía no es mucho. Por más que sea la versión WD RE4 Enterprise, si no tiene garantía del fabricante, y el primero que pruebo no funciona, creo que va a ser mejor que lo devuelva y recupero mi dinero. El vendedor me decía que eran nuevos, sin uso, y que al formatearlos les daba cero horas de uso. http://products.wdc.com/library/SpecSheet/ENG/2879-701338.pdf Si bien es cierto el WD RE4 Enterprise tiene 1.2 million hours MTBF contra 300.000 el Toshiba, con 5.500 horas, todavía está muy lejos de las 300.000 especificadas: https://www.geektopia.es/es/product/toshiba/dt01aca200/ Por otro lado, el Western Digital que tengo de 1 TB, con la mitad de uso del Toshiba, tiene mas errores que este último: 188 Command_Timeout 0x0032 100 001 000 Old_age Always - 25770197364 199 UDMA_CRC_Error_Count 0x0032 200 183 000 Old_age Always - 446 Gracias! -- USA LINUX OPENSUSE QUE ES SOFTWARE LIBRE, NO NECESITAS PIRATEAR NADA Y NI TE VAS A PREOCUPAR MAS POR LOS VIRUS Y SPYWARES: http://www.opensuse.org/es/ Puedes visitar mi blog en: http://jerbes.blogspot.com.ar/ -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org