El día 31 de diciembre de 2013, 12:57, Flako
El día 31 de diciembre de 2013, 9:41, Maxi
escribió: Tengo un hdd fujitsu de una notebook que falló y no arrancó mas, creia
mm, depende de porque 'no arrancó mas,' :), (depende del tipo de falla.)
Envíanos la salida del comando: smartctl -a /dev/sda (permite analizar la salud del disco)
Supongo que el disco es leíble porque estas instalando un SO, suponiendo esto lo que podes hacer es forzar que el disco reasigne los sectores dañados.., esto lo haces con:
badblocks -wsv -o badblock_sda.log /dev/sda;
en badblock_sda.log tenes los sectores defectuosos
luego deberias hacer los test smart smartctl -t short /dev/sda smartctl -t long /dev/sda smartctl -t offline /dev/sda smartctl -a /dev/sda
En análisis de fallas por smart es mas arte que ciencia por lo que es dificll explicar que mirar.. busca varios buenos tutoriales y envíanos las salidas de los comandos. Seria ideal si podes poner el disco en otra notebook, puede darse el caso que la falla sea producida por falla en la alimentación del disco.
Saludos. -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org
le pase el smartctl y parecemas muerto que vivo, pero lo loco es que le instale os13.1 y arranca de lo mas bien. Entiendo Carlos lo que me dices pero entre tenerla tirada y podes usarla ara navegar sobra. igual sabe que en que condiciones se la lleva. cuando dices poner ceros es con dd? ------------------------------------------------------------------------------------------- smartctl 6.0 2012-10-10 r3643 [i686-linux-3.5.6-pmagic] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Fujitsu MHZ BH Device Model: FUJITSU MHZ2320BH G2 Serial Number: K618T8C37647 LU WWN Device Id: 5 00000e 0433da2b4 Firmware Version: 8909 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 3f SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Tue Dec 31 10:39:57 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 1298) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 184) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 246501 2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 56557568 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1650 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0 (2000 0) 7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 718 8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 1563 10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 770 182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 253 253 097 Pre-fail Always - 0 185 Unknown_Attribute 0x0010 253 253 000 Old_age Offline - 0 186 Unknown_Attribute 0x0032 253 253 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 493921239040 188 Command_Timeout 0x0032 100 001 000 Old_age Always - 68720568707 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 044 022 000 Old_age Always - 56 (1 8 56 31 0) 191 G-Sense_Error_Rate 0x0032 253 253 000 Old_age Always - 16580608 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3538998 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 12290 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 537 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 (0 6923) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 21152 203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 3728058088825 240 Head_Flying_Hours 0x003e 200 198 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 3 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 occurred at disk power-on lifetime: 1549 hours (64 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 01 00 00 00 e0 00 00:32:16.991 READ DMA EXT 25 00 01 00 00 00 e0 00 00:32:16.991 READ DMA EXT 25 00 01 00 00 00 e0 00 00:32:16.991 READ DMA EXT 25 00 01 00 00 00 e0 00 00:31:28.515 READ DMA EXT b0 da 00 00 4f c2 00 00 00:31:23.830 SMART RETURN STATUS Error 2 occurred at disk power-on lifetime: 1549 hours (64 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 a0 60 00 00 40 Error: ICRC, ABRT 160 sectors at LBA = 0x00000060 = 96 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 00 00 00 40 00 00:00:14.475 READ DMA EXT b0 da 00 00 4f c2 00 00 00:00:09.801 SMART RETURN STATUS ef 03 45 00 00 00 00 00 00:00:08.249 SET FEATURES [Set transfer mode] ef 03 45 00 00 00 00 00 00:00:08.197 SET FEATURES [Set transfer mode] ec 00 01 00 00 00 00 00 00:00:08.195 IDENTIFY DEVICE Error 1 occurred at disk power-on lifetime: 1548 hours (64 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 e0 20 00 00 40 Error: ICRC, ABRT 224 sectors at LBA = 0x00000020 = 32 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 00 00 00 40 00 00:01:49.027 READ DMA EXT b0 da 00 00 4f c2 00 00 00:01:42.486 SMART RETURN STATUS ef 03 45 00 00 00 00 00 00:01:40.894 SET FEATURES [Set transfer mode] ef 03 45 00 00 00 00 00 00:01:40.842 SET FEATURES [Set transfer mode] ec 00 01 00 00 00 00 00 00:01:40.840 IDENTIFY DEVICE SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 80% 1552 - # 2 Short offline Completed without error 00% 359 - # 3 Short offline Completed without error 00% 337 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ------------------------------------------------------------------------------------------- -- El que pregunta aprende, y el que contesta aprende a responder. No a la obsolecencia programada: http://www.rtve.es/noticias/20110104/productos-consumo-duran-cada-vez-menos/... Linux User #495070 http://domonetic.com/blog -- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org