Also ich bin ganz nüchtern und trolle nicht rum ;-) Verschiedene Programme meinen es sind _2_ CD-Laufwerke eingebaut, es ist aber _1_ vorhanden. Ich hänge 1 kleines Bild mit 2,8KB daran, damit man es sieht. hwinfo --cdrom 13: IDE 02.0: 10602 CD-ROM [Created at block.222] UDI: /org/freedesktop/Hal/devices/storage_model_LTN403 Unique ID: 90A1.kLkLOxQnNoC Parent ID: +6Nb.L6YUholkGT8 SysFS ID: /block/hdc SysFS BusID: 1.0 SysFS Device Link: /devices/pci0000:00/0000:00:04.1/ide1/1.0 Hardware Class: cdrom Model: "LTN403" Device: "LTN403" Revision: "DU22" Serial ID: "" Driver: "PIIX_IDE", "ide-cdrom" Driver Modules: "piix", "ide_cd" Device File: /dev/hdc Device Files: /dev/hdc, /dev/disk/by-path/pci-0000:00:04.1-ide-1:0, /dev/cdrom Device Number: block 22:0 Size: 0 sectors a 512 bytes Drive status: no medium Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #4 (IDE interface) Drive Speed: 40 14: IDE 03.0: 10602 CD-ROM (CD-RW) [Created at block.222] UDI: /org/freedesktop/Hal/devices/storage_model_SAMSUNG_CD_R/RW_SW_408B Unique ID: cBQ5.iOhFYJz8ar6 Parent ID: +6Nb.L6YUholkGT8 SysFS ID: /block/hdd SysFS BusID: 1.1 SysFS Device Link: /devices/pci0000:00/0000:00:04.1/ide1/1.1 Hardware Class: cdrom Model: "SAMSUNG CD-R/RW SW-408B" Vendor: "SAMSUNG" Device: "CD-R/RW SW-408B" Revision: "BS04" Serial ID: "" Driver: "PIIX_IDE", "ide-cdrom" Driver Modules: "piix", "ide_cd" Device File: /dev/hdd Device Files: /dev/hdd, /dev/disk/by-path/pci-0000:00:04.1-ide-1:1, /dev/cdrecorder Device Number: block 22:64 Features: CD-R, CD-RW Size: 0 sectors a 512 bytes Drive status: no medium Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #4 (IDE interface) Drive Speed: 32 als root: # mount /dev/hdc /mnt mount: blockorientiertes Gerät /dev/hdc ist schreibgeschützt, wird eingehängt im Nur-Lese-Modus ls /mnt/ 01101009 autorun.exe autorun.inf cdinfo # mount /dev/hdd /mnt mount: Kein Medium gefunden No na, wüßte ja auch nicht, wo ich das Medium reinstecken soll. In hdc ist die Daten-CD noch immer vorhanden. Woher kommt die Info von /dev/hdd? Das gibt es _physikalisch_ sicher nicht. wodim -scanbus dev=ATAPI 0,0,0 0) 'LITEON ' 'CD-ROM LTN403 ' 'DU22' Removable CD-ROM 0,1,0 1) 'SAMSUNG ' 'CD-R/RW SW-408B ' 'BS04' Removable CD-ROM /opt/schily/bin/cdrecord -scanbus dev=ATA Cdrecord-ProDVD-Clone 2.01.01a23 (i686-pc-linux-gnu) Copyright (C) 1995-2006 ... 1001,0,0 100100) 'LITEON ' 'CD-ROM LTN403 ' 'DU22' Removable CD-ROM 1001,1,0 100101) 'SAMSUNG ' 'CD-R/RW SW-408B ' 'BS04' Removable CD-ROM So, jetzt missbrauche ich mal hdparm: hdparm -viITt /dev/hdc /dev/hdc: IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=LTN403, FwRev=DU22, SerialNo= Config={ SpinMotCtl Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no * signifies the current active mode ATAPI CD-ROM, with removable media Model Number: LTN403 Serial Number: Firmware Revision: DU22 Standards: Used: ATAPI for CD-ROMs, SFF-8020i, r2.5 Supported: CD-ROM ATAPI-1 Configuration: DRQ response: <=10ms with INTRQ Packet size: 12 bytes Capabilities: LBA, IORDY(can be disabled) DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Timing cached reads: 182 MB in 2.01 seconds = 90.53 MB/sec Timing buffered disk reads: 10 MB in 3.16 seconds = 3.17 MB/sec Ok, das ist klar, aber das: hdparm -viITt /dev/hdd /dev/hdd: IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=SAMSUNG CD-R/RW SW-408B, FwRev=BS04, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 *mdma1 mdma2 AdvancedPM=no * signifies the current active mode ATAPI CD-ROM, with removable media Model Number: SAMSUNG CD-R/RW SW-408B Serial Number: Firmware Revision: BS04 Standards: Likely used CD-ROM ATAPI-1 Configuration: DRQ response: 50us. Packet size: 12 bytes Capabilities: LBA, IORDY(can be disabled) DMA: sdma0 sdma1 sdma2 mdma0 *mdma1 mdma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns read() failed: Input/output error Timing buffered disk reads: read() failed: Input/output error smartctl -a /dev/hdc smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: LTN403 Serial Number: [No Information Found] Firmware Version: DU22 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Feb 24 11:58:01 2007 CET Ok, aber das wieder: martctl -a /dev/hdd smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: SAMSUNG CD-R/RW SW-408B Serial Number: [No Information Found] Firmware Version: BS04 Device is: In smartctl database [for details use: -P show] ATA Version is: 1 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Feb 24 11:58:31 2007 CET Ich bin schon gespannt, was ihr dazu meint. Ich könnte mir theoretisch noch vorstellen, dass hinter der Blende ein weiteres Laufwerk verbaut ist, aber wer macht so was? Es ist zur Zeit eher problematisch, den Rechner abzuschließen und zu öffnen, da er gerade als Reserve-Gateway dient, während ein Rechner umgebaut wird. Al (etwas verwirrt)