Hallo Liste, hat jemand eine Idee wie ich eine Minolta Dimage 7Hi über USB an Linux 8.2 anbinden kann ? Das USB Device wird wohl erkannt aber kann nicht eingebunden werden, reicht ein Eintrag unter /etc/hotplug/usb/usbcam.usermap ? Und wenn ja wie müsste der lauten? Beim Anschließen erhalte ich folgendes Log : Aug 20 10:47:11 workplace kernel: hub.c: new USB device 00:07.4-2, assigned address 8 Aug 20 10:47:11 workplace kernel: usb.c: error getting string descriptor 0 (error=-110) Aug 20 10:47:12 workplace kernel: WARNING: USB Mass Storage data integrity not assured Aug 20 10:47:12 workplace kernel: USB Mass Storage device found at 8 Aug 20 10:47:12 workplace /sbin/hotplug[7141]: /sbin/hotplug usb Aug 20 10:47:12 workplace /sbin/hotplug[7141]: HOME=/ Aug 20 10:47:12 workplace /sbin/hotplug[7141]: PATH=/bin:/sbin:/usr/sbin:/usr/bin Aug 20 10:47:12 workplace /sbin/hotplug[7141]: ACTION=add Aug 20 10:47:12 workplace /sbin/hotplug[7141]: INTERFACE=8/6/80 Aug 20 10:47:12 workplace /sbin/hotplug[7141]: DEVFS=/proc/bus/usb Aug 20 10:47:12 workplace /sbin/hotplug[7141]: DEVICE=/proc/bus/usb/001/008 Aug 20 10:47:12 workplace /sbin/hotplug[7141]: PRODUCT=686/400f/1 Aug 20 10:47:12 workplace /sbin/hotplug[7141]: TYPE=0/0/0 Aug 20 10:47:12 workplace /sbin/hotplug[7141]: LOCAL_USBLOCK usblock-1061369232-_proc_bus_usb_001_008.lock sleeps 3 Aug 20 10:47:15 workplace /sbin/hotplug[7141]: invoke /etc/hotplug/usb.agent Aug 20 10:47:16 workplace /etc/hotplug/usb.agent[7158]: Setup usb-storage from modules.usbmap for USB product 686/400f/1 Aug 20 10:47:16 workplace /etc/hotplug/usb.agent[7158]: BeepInfo: TYPE=usb ACTION=add DRIVERS=usb-storage DEVICE=/proc/bus/usb/001/008 Aug 20 10:47:16 workplace kernel: Device not ready. Make sure there is a disc in the drive. Aug 20 10:47:17 workplace kernel: sda : READ CAPACITY failed. Aug 20 10:47:17 workplace kernel: sda : status = 0, message = 00, host = 7, driver = 00 Aug 20 10:47:17 workplace kernel: sda : sense not available. Aug 20 10:47:17 workplace kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Aug 20 10:47:17 workplace kernel: sda: test WP failed, assume Write Enabled Aug 20 10:47:17 workplace kernel: sda:SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 70000 Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:17 workplace kernel: SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 70000 Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 1 Aug 20 10:47:17 workplace kernel: SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 70000 Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 2 Aug 20 10:47:17 workplace kernel: SCSI disk error : host 1 channel 0 id 0 lun 0 return code = 70000 Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 3 Aug 20 10:47:17 workplace kernel: usb.c: USB disconnect on device 00:07.4-2 address 8 Aug 20 10:47:17 workplace kernel: Device 08:00 not ready. Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 4 Aug 20 10:47:17 workplace kernel: Device 08:00 not ready. Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:17 workplace kernel: Device 08:00 not ready. Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 2097144 Aug 20 10:47:17 workplace kernel: Device 08:00 not ready. Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 2097144 Aug 20 10:47:17 workplace kernel: Device 08:00 not ready. Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:17 workplace kernel: Device 08:00 not ready. Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:17 workplace kernel: unable to read partition table Aug 20 10:47:17 workplace kernel: Device not ready. Make sure there is a disc in the drive. Aug 20 10:47:17 workplace kernel: Device 08:00 not ready. Aug 20 10:47:17 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:17 workplace kernel: Device not ready. Make sure there is a disc in the drive. Aug 20 10:47:18 workplace /sbin/hotplug[7187]: /sbin/hotplug usb Aug 20 10:47:18 workplace /sbin/hotplug[7187]: HOME=/ Aug 20 10:47:18 workplace /sbin/hotplug[7187]: PATH=/bin:/sbin:/usr/sbin:/usr/bin Aug 20 10:47:18 workplace /sbin/hotplug[7187]: ACTION=remove Aug 20 10:47:18 workplace /sbin/hotplug[7187]: INTERFACE=8/6/80 Aug 20 10:47:18 workplace /sbin/hotplug[7187]: DEVFS=/proc/bus/usb Aug 20 10:47:18 workplace /sbin/hotplug[7187]: DEVICE=/proc/bus/usb/001/008 Aug 20 10:47:18 workplace /sbin/hotplug[7187]: PRODUCT=686/400f/1 Aug 20 10:47:18 workplace /sbin/hotplug[7187]: TYPE=0/0/0 Aug 20 10:47:18 workplace /sbin/hotplug[7187]: LOCAL_USBLOCK usblock-1061369238-_proc_bus_usb_001_008.lock sleeps 6 Aug 20 10:47:19 workplace /etc/hotplug/usb.agent[7158]: Can't ignore signal CHLD, forcing to default. Aug 20 10:47:19 workplace /etc/hotplug/usb.agent[7158]: Wrote remover script '/var/run/hotplug/usb-remover-8%6%80%686%400f%1%0%0%0' with following content: Aug 20 10:47:19 workplace /etc/hotplug/usb.agent[7158]: remover script: COUNT=1 Aug 20 10:47:19 workplace /etc/hotplug/usb.agent[7158]: remover script: /usr/sbin/checkhotmounts Aug 20 10:47:19 workplace /etc/hotplug/usb.agent[7158]: remover script: test $COUNT -gt 1 && exit Aug 20 10:47:25 workplace /sbin/hotplug[7187]: invoke /etc/hotplug/usb.agent Aug 20 10:47:25 workplace kernel: Device not ready. Make sure there is a disc in the drive. Aug 20 10:47:26 workplace kernel: Device not ready. Make sure there is a disc in the drive. Aug 20 10:47:26 workplace kernel: sda : READ CAPACITY failed. Aug 20 10:47:26 workplace kernel: sda : status = 1, message = 00, host = 0, driver = 08 Aug 20 10:47:26 workplace kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70 2 Aug 20 10:47:26 workplace kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 Aug 20 10:47:26 workplace kernel: sda : block size assumed to be 512 bytes, disk size 1GB. Aug 20 10:47:26 workplace kernel: sda: I/O error: dev 08:00, sector 0 Aug 20 10:47:26 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:26 workplace kernel: I/O error: dev 08:00, sector 2097144 Aug 20 10:47:26 workplace kernel: I/O error: dev 08:00, sector 2097144 Aug 20 10:47:26 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:26 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:26 workplace kernel: unable to read partition table Aug 20 10:47:26 workplace kernel: Device not ready. Make sure there is a disc in the drive. Aug 20 10:47:26 workplace kernel: I/O error: dev 08:00, sector 0 Aug 20 10:47:26 workplace kernel: Device not ready. Make sure there is a disc in the drive. Aug 20 10:47:27 workplace /etc/hotplug/usb.agent[7211]: Execute remover script '/var/run/hotplug/usb-remover-8%6%80%686%400f%1%0%0%0' Gruss Stefan