Hallo,

ich wollte gerade bei meiner neuen 13.2 den Drucker installieren. Vorgehensweise wie schon seit 2011. (soll heissen, ich weiss wie es geht/gehen sollte ;-)). Bei 13.1 und weiter zurück hat's prima geklappt.

Allerdings wird keine Testseite gedruckt. Aus Libreoffice druckt er zwar aber mit einer (falschen) Linie die sich über drei Seiten erstreckt. Irgendwas läuft schief.

Der Drucker ist ein Epson BX525WD, Treiber (epson-inkjet-printer-workforce-635-nx625-series-1.0.1-1lsb3.2.x86_64.rpm) von Epson direkt runtergeladen. Anschluss über WLAN 192.168.1.10:9100

Der Verbindungsassi in Yast sagt, Verbindung OK. Scannen geht!

Im Moment weiß ich nicht, was schief geht. In der error_log des cups steht für den letzten Versuch für die Testseite:

E [16/Nov/2014:12:26:20 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"! E [16/Nov/2014:12:29:19 +0100] [Job 6] Job stopped due to filter errors; please consult the error_log file for details. D [16/Nov/2014:12:29:19 +0100] [Job 6] The following messages were recorded from 12:29:15 to 12:29:19 D [16/Nov/2014:12:29:19 +0100] [Job 6] Adding start banner page "none". D [16/Nov/2014:12:29:19 +0100] [Job 6] Queued on "epson" by "root". D [16/Nov/2014:12:29:19 +0100] [Job 6] Auto-typing file... D [16/Nov/2014:12:29:19 +0100] [Job 6] Request file type is application/postscript. D [16/Nov/2014:12:29:19 +0100] [Job 6] File of type application/postscript queued by "root". D [16/Nov/2014:12:29:19 +0100] [Job 6] Adding end banner page "none". D [16/Nov/2014:12:29:19 +0100] [Job 6] job-sheets=none,none D [16/Nov/2014:12:29:19 +0100] [Job 6] argv[0]="epson" D [16/Nov/2014:12:29:19 +0100] [Job 6] argv[1]="6" D [16/Nov/2014:12:29:19 +0100] [Job 6] argv[2]="root" D [16/Nov/2014:12:29:19 +0100] [Job 6] argv[3]="YaST2testprint_epson" D [16/Nov/2014:12:29:19 +0100] [Job 6] argv[4]="1" D [16/Nov/2014:12:29:19 +0100] [Job 6] argv[5]="finishings=3 number-up=1 page-label=epson:YaST2testprint@Helena job-uuid=urn:uuid:e035adb9-7b93-30fb-607c-2547d51f2771 job-originating-host-name=localhost time-at-creation=1416137355 time-at-processing=1416137355" D [16/Nov/2014:12:29:19 +0100] [Job 6] argv[6]="/var/spool/cups/d00006-001" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[1]="CUPS_DATADIR=/usr/share/cups" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[2]="CUPS_DOCROOT=/usr/share/cups/webcontent" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[6]="CUPS_SERVERROOT=/etc/cups" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[7]="CUPS_STATEDIR=/run/cups" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[8]="HOME=/var/spool/cups/tmp" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[10]="SERVER_ADMIN=root@Helena" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[11]="SOFTWARE=CUPS/1.5.4" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[12]="TMPDIR=/var/spool/cups/tmp" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[13]="USER=root" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[14]="CUPS_MAX_MESSAGE=2047" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[15]="CUPS_SERVER=/run/cups/cups.sock" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[16]="CUPS_ENCRYPTION=IfRequested" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[17]="IPP_PORT=631" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[18]="CHARSET=utf-8" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[19]="LANG=en.UTF-8" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[20]="PPD=/etc/cups/ppd/epson.ppd" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[21]="RIP_MAX_CACHE=128m" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[22]="CONTENT_TYPE=application/postscript" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[23]="DEVICE_URI=socket://192.168.1.10:9100" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[24]="PRINTER_INFO=Epson Stylus Office BX525WD" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[25]="PRINTER_LOCATION=" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[26]="PRINTER=epson" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[27]="PRINTER_STATE_REASONS=marker-supply-empty-warning" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[28]="CUPS_FILETYPE=document" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[29]="FINAL_CONTENT_TYPE=printer/epson" D [16/Nov/2014:12:29:19 +0100] [Job 6] envp[30]="AUTH_I****" D [16/Nov/2014:12:29:19 +0100] [Job 6] Started filter /usr/lib/cups/filter/pstotiff (PID 9416) D [16/Nov/2014:12:29:19 +0100] [Job 6] Started filter /usr/lib/cups/filter/imagetoraster (PID 9417) D [16/Nov/2014:12:29:19 +0100] [Job 6] Started filter /opt/epson-inkjet-printer-workforce-635-nx625-series/cups/lib/filter/epson_inkjet_printer_filter (PID 9418) D [16/Nov/2014:12:29:19 +0100] [Job 6] Started backend /usr/lib/cups/backend/socket (PID 9419) D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: +connecting-to-device D [16/Nov/2014:12:29:19 +0100] [Job 6] Looking up "192.168.1.10"... D [16/Nov/2014:12:29:19 +0100] [Job 6] imagetops - copying to temp print file "/var/spool/cups/tmp/024c9546b2663". D [16/Nov/2014:12:29:19 +0100] [Job 6] Can't open CUPS raster file.GPL Ghostscript 9.15 (2014-09-22) D [16/Nov/2014:12:29:19 +0100] [Job 6] Copyright (C) 2014 Artifex Software, Inc. All rights reserved. D [16/Nov/2014:12:29:19 +0100] [Job 6] This software comes with NO WARRANTY: see the file PUBLIC for details. D [16/Nov/2014:12:29:19 +0100] [Job 6] Loading NimbusSanL-Bold font from /usr/share/ghostscript/9.15/Resource/Font/NimbusSanL-Bold... 4246912 2728031 1646152 346945 1 done. D [16/Nov/2014:12:29:19 +0100] [Job 6] Loading NimbusSanL-Regu font from /usr/share/ghostscript/9.15/Resource/Font/NimbusSanL-Regu... 4263856 2786465 1646152 350621 1 done. D [16/Nov/2014:12:29:19 +0100] [Job 6] Loading NimbusRomNo9L-Regu font from /usr/share/ghostscript/9.15/Resource/Font/NimbusRomNo9L-Regu... 4280800 2857225 1646152 354310 1 done. D [16/Nov/2014:12:29:19 +0100] [Job 6] Page = 595x842; 8,8 to 587,834 D [16/Nov/2014:12:29:19 +0100] [Job 6] TIFF resolution = 204.000000x196.000000, units=2 D [16/Nov/2014:12:29:19 +0100] [Job 6] Stored resolution = 204x196 PPI D [16/Nov/2014:12:29:19 +0100] [Job 6] img->colorspace = 1 D [16/Nov/2014:12:29:19 +0100] [Job 6] orientation = top-left D [16/Nov/2014:12:29:19 +0100] [Job 6] photometric = 0 D [16/Nov/2014:12:29:19 +0100] [Job 6] compression = 4 D [16/Nov/2014:12:29:19 +0100] [Job 6] Before scaling: xppi=204, yppi=196, zoom=0.00 D [16/Nov/2014:12:29:19 +0100] [Job 6] Before scaling: xprint=8.0, yprint=11.5 D [16/Nov/2014:12:29:19 +0100] [Job 6] Image size is 8.5 x 11.0 inches... D [16/Nov/2014:12:29:19 +0100] [Job 6] Auto orientation... D [16/Nov/2014:12:29:19 +0100] [Job 6] xpages = 2x4.24in, ypages = 1x11.00in D [16/Nov/2014:12:29:19 +0100] [Job 6] XPosition=0, YPosition=0, Orientation=0 D [16/Nov/2014:12:29:19 +0100] [Job 6] xprint=4, yprint=11 D [16/Nov/2014:12:29:19 +0100] [Job 6] PageLeft=8, PageRight=587, PageWidth=595 D [16/Nov/2014:12:29:19 +0100] [Job 6] PageBottom=8, PageTop=834, PageLength=842 D [16/Nov/2014:12:29:19 +0100] [Job 6] left=145.18, top=816.95 D [16/Nov/2014:12:29:19 +0100] [Job 6] Printing page 1. D [16/Nov/2014:12:29:19 +0100] [Job 6] Printing page 2. D [16/Nov/2014:12:29:19 +0100] [Job 6] hrDeviceDesc="Unknown" D [16/Nov/2014:12:29:19 +0100] [Job 6] prtGeneralCurrentLocalization=1 D [16/Nov/2014:12:29:19 +0100] [Job 6] prtLocalizationCharacterSet=3 D [16/Nov/2014:12:29:19 +0100] [Job 6] prtMarkerSuppliesColorantIndex.1.1 = 1 D [16/Nov/2014:12:29:19 +0100] [Job 6] prtMarkerColorantValue.1.1 = "black" D [16/Nov/2014:12:29:19 +0100] [Job 6] prtMarkerColorantValue.1.2 = "cyan" D [16/Nov/2014:12:29:19 +0100] [Job 6] prtMarkerColorantValue.1.3 = "magenta" D [16/Nov/2014:12:29:19 +0100] [Job 6] prtMarkerColorantValue.1.4 = "yellow" D [16/Nov/2014:12:29:19 +0100] [Job 6] ATTR: marker-colors=#000000 D [16/Nov/2014:12:29:19 +0100] [Job 6] ATTR: marker-names='""' D [16/Nov/2014:12:29:19 +0100] [Job 6] ATTR: marker-types=unknown D [16/Nov/2014:12:29:19 +0100] [Job 6] ATTR: marker-levels=-1 D [16/Nov/2014:12:29:19 +0100] [Job 6] new_supply_state=0, change_state=ffff D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -developer-low-report D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -developer-empty-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -marker-supply-low-report D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -marker-supply-empty-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -opc-near-eol-report D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -opc-life-over-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -toner-low-report D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -toner-empty-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] new_state=2000, change_state=ffff D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -media-low-report D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -media-empty-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -door-open-report D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -media-jam-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -input-tray-missing-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -output-tray-missing-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -marker-supply-missing-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -output-area-almost-full-report D [16/Nov/2014:12:29:19 +0100] [Job 6] STATE: -output-area-full-warning D [16/Nov/2014:12:29:19 +0100] [Job 6] backendWaitLoop(snmp_fd=5, addr=0x7fb3d8f07e18, side_cb=0x7fb3d6ec3430) D [16/Nov/2014:12:29:19 +0100] [Job 6] End of messages D [16/Nov/2014:12:29:19 +0100] [Job 6] printer-state=3(idle) D [16/Nov/2014:12:29:19 +0100] [Job 6] printer-state-message="Printing page 2." D [16/Nov/2014:12:29:19 +0100] [Job 6] printer-state-reasons=none

Aus dem log geht hervor, dass da schon Fehler auftreten doch sind die entscheidend?

Hat jemand eine Anleitung für schrittweise Tests um rauszukriegen, was klemmt?

Gruß

Joachim