Am Montag 31 Mai 2010 20:26:44 schrieb Lutz Thuns:
Am 31.05.2010 19:15, schrieb Al Bogner:
Hallo Lutz,
sax2 -r -m 0=nvidia
Das wundert mich auch nicht, ich habe mit sax2 nichts abgespeichert. Wozu auch? Stimmt ja weder der Treiber, noch die Auflösung.
Mich wundert das schon, denn der oben gelistete Befehl setzt genau den "nvidia"-Treiber in die xorg.conf.
dann darfst du dich nochmals wundern, warum es mit dieser Hardware davor ok war, allerdings war das 11.2-Standardinstalltion mit KDE Nvidia-RPM-Installtion Nvidia-RPM-Deinstalltion Nvidia selber kompiliert
Wie vom Vorposter schon geschrieben, probiers halt mal ohne xorg.conf,
Damit hat es geklappt, mplayer verwendet vdpau und 3D ist mir vorerst egal. Laut: http://h10010.www1.hp.com/wwpc/pscmisc/vac/us/product_pdfs/ZR24w_data_sheet_... | Frequency | 24 to 80 Hz (Horizontal); 59 to 61 Hz (Vertical) Soll ich das in der xorg.conf korrigieren? | Native resolution | 1920x1200 @ 60 Hz , 2.3 Million pixels, 16:10 aspect ratio | Resolutions supported | 1920 x 1200 @ 60Hz, 1920 x 1080 @ 60Hz, 1680 x 1050 @ 60Hz, 1600 x 1200 @60 | Hz,1440 x 900 @ 60 Hz, 1280 x 1024 @ 60 Hz, 1280 x 960 @ 60 Hz, 1024 x 768 @ | 60 Hz, 800 x 600 @ 60 Hz, 640 x 480 @ 60 Hz cat xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder58) Thu Apr 22 20:35:23 PDT 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Wenn ich über den Monitor die Auflösung abfrage, dann wird 1920x1200 angezeigt. Das ist die xorg.conf unter 11.1 (selber Rechner), die von sax2 erstellt wurde. Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 380 290 HorizSync 15-74 Identifier "Monitor[0]" ModelName "Unknown" Option "DPMS" Option "PreferredMode" "1920x1200" VendorName "Unknown" VertRefresh 50-61 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" "1900x1200" "1920x1080" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1600x900" "1280x1024" "1440x900" "1280x960" "1366x768" "1360x768" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org