Naja, was soll ich sagen... Nach den Änderungen in der /etc/sysconfig/kernel wird die Schrift in der Tat kleiner und damit das Ganze auch übersichtlicher, nicht schlecht. Beim Start von X Windows (startx) wird aber immernoch der Bildschirm schwarz, und Nichts geht mehr (außer der Netzwerk-Zugriff von außen halt). Das Einzige was neu ist ist nun ein "_"-Zeichen oben links auf dem Bildschirm, das aber nicht blinkt. Leider... Viele Grüße Klaus Anbei nochmal die Xorg.0.log: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux btpbx6 2.6.31-41-desktop #1 SMP PREEMPT 2009-09-14 21:34:43 +0200 x86_64 Build Date: 15 September 2009 12:47:42AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 18 15:31:38 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "Device[0]" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (**) Option "ZapWarning" "on" (**) Option "AllowMouseOpenFail" "on" (**) Option "AIGLX" "off" (**) Option "AutoAddDevices" "on" (**) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/truetype/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, built-ins (**) Input device list set to "/dev/gpmdata,/dev/input/mice" (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" (**) Extension "Composite" is enabled (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0x3f7c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2a42:10cf:1458 rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:2a43:10cf:1458 rev 7, Mem @ 0xf2400000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules//extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (**) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules//extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules//extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib64/xorg/modules//drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.8.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D, IGDNG_M (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset" (II) intel(0): Output VGA1 has no monitor section (II) intel(0): Output LVDS1 has no monitor section (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 (II) intel(0): Output DVI1 has no monitor section (II) intel(0): Output DP1 has no monitor section (II) intel(0): Output DVI2 has no monitor section (II) intel(0): Output DP2 has no monitor section (II) intel(0): Output DP3 has no monitor section (II) intel(0): Output VGA1 disconnected (II) intel(0): Output LVDS1 connected (II) intel(0): Output DVI1 disconnected (II) intel(0): Output DP1 disconnected (II) intel(0): Output DVI2 disconnected (II) intel(0): Output DP2 disconnected (II) intel(0): Output DP3 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS1 using initial mode 1280x800 (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) intel(0): [DRI2] Setup complete (**) intel(0): Kernel mode setting active, disabling FBC. (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): No memory allocations (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm (II) config/hal: Adding input device PS/2 Generic Mouse (II) LoadModule: "evdev" (II) Loading /usr/lib64/xorg/modules//input/evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.2.5 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) PS/2 Generic Mouse: always reports core events (**) PS/2 Generic Mouse: Device: "/dev/input/event1" (II) PS/2 Generic Mouse: Found 3 mouse buttons (II) PS/2 Generic Mouse: Found x and y relative axes (II) PS/2 Generic Mouse: Configuring as mouse (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5 (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE) (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Generic Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Generic Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Generic Mouse: (accel) set acceleration profile 0 (II) PS/2 Generic Mouse: initialized for relative axes. (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (II) LoadModule: "synaptics" (II) Loading /usr/lib64/xorg/modules//input/synaptics_drv.so (II) Module synaptics: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) Synaptics touchpad driver version 1.1.3 (**) Option "Device" "/dev/input/event2" (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 (II) SynPS/2 Synaptics TouchPad: buttons: left right middle (**) Option "SHMConfig" "on" (**) Option "HorizScrollDelta" "0" (--) SynPS/2 Synaptics TouchPad: touchpad found (**) SynPS/2 Synaptics TouchPad: always reports core events (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found (II) config/hal: Adding input device AT Translated Set 2 keyboard (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Fujitsu FUJ02B1 (**) Fujitsu FUJ02B1: always reports core events (**) Fujitsu FUJ02B1: Device: "/dev/input/event8" (II) Fujitsu FUJ02B1: Found keys (II) Fujitsu FUJ02B1: Configuring as keyboard (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Video Bus (**) Video Bus: always reports core events (**) Video Bus: Device: "/dev/input/event3" (II) Video Bus: Found keys (II) Video Bus: Configuring as keyboard (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) config/hal: Adding input device Fujitsu FUJ02E3 (**) Fujitsu FUJ02E3: always reports core events (**) Fujitsu FUJ02E3: Device: "/dev/input/event9" (II) Fujitsu FUJ02E3: Found keys (II) Fujitsu FUJ02E3: Configuring as keyboard (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-D378AD8F86E560F712A83EE36E4E5E92C595B9BD.xkm (II) PS/2 Generic Mouse: Close (II) UnloadModule: "evdev" (II) UnloadModule: "synaptics" (II) AT Translated Set 2 keyboard: Close (II) UnloadModule: "evdev" (II) Fujitsu FUJ02B1: Close (II) UnloadModule: "evdev" (II) Video Bus: Close (II) UnloadModule: "evdev" (II) Fujitsu FUJ02E3: Close (II) UnloadModule: "evdev" (II) Open ACPI successful (/var/run/acpid.socket) (II) APM registered successfully (II) intel(0): [DRI2] Setup complete (**) intel(0): Kernel mode setting active, disabling FBC. (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. Backtrace: 0: X(xorg_backtrace+0x2d) [0x53873d] 1: X(xf86SigHandler+0x8d) [0x4c0e00] 2: /lib64/libc.so.6 [0x7f51b10af6e0] 3: /usr/lib64/libdrm_intel.so.1(drm_intel_bo_alloc+0x3) [0x7f51afacc993] 4: /usr/lib64/xorg/modules//drivers/intel_drv.so(i830_allocate_memory+0x326) [0x7f51afd0bc36] 5: /usr/lib64/xorg/modules//drivers/intel_drv.so(i830_allocate_2d_memory+0xb4) [0x7f51afd0c594] 6: /usr/lib64/xorg/modules//drivers/intel_drv.so [0x7f51afd01827] 7: /usr/lib64/xorg/modules//drivers/intel_drv.so [0x7f51afd06390] 8: X(AddScreen+0x365) [0x433ce5] 9: X(InitOutput+0x1352) [0x48a68d] 10: X(main+0x281) [0x432f02] 11: /lib64/libc.so.6(__libc_start_main+0xe6) [0x7f51b109b586] 12: X [0x432b79] Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. Manfred Tremmel schrieb:
Am Freitag, 18. September 2009 schrieb Klaus Becker:
nachdem ich das AIGLX ausgeschaltet habe kommt der Fehler im log nicht mehr vor.
Ok.
Wenn ich die Kernel Parameter "i915.modeset=0" oder "vga=normal" nutze kommt wieder der Fehler: "(EE) intel(0): Failed to initialize kernel memory manager" im log vor.
Ansonsten tut sich leider garnichts.
Dann kommen wir an KMS wohl sowieso nicht vorbei.
Ich kann jedenfalls nichts feststellen, daß sich irgendein Videomodus beim Booten ändert oder irgendwie umgeschaltet wird. Der Laptop bootet auch im initlevel 3.
Hm, dann nimm Dir mal die /etc/sysconfig/kernel vor, und füge bei den INITRD_MODULES die Module "intel_agp drm i915" mit ein. Nach dem Abspeichern ein /sbin/mkinitrd durchführen. Dann neu booten. Nach dem grub sollte die Konsole kurz in 80x25 Zeichen erscheinen und nach Laden der Module in den zum Display passenden Grafikmodus (1280x800 Bildpunkte) wechseln, die Schrift wird dann deutlich kleiner.
Wenn ich dann X Window mit startx starte wird der Bildschirm schwarz und bleibt auch schwarz, egal was ich auch mache. Ein Umschalten auf eine Text- Shell geht auch nicht mehr.
Ein ähnliches Phänomen hatte ich mit Kernel 2.6.30, seit dem 2.6.31er glücklicherweise nicht mehr.
Die logfiles habe ich dann bisher immer über ssh ausgelesen. Ganz abstürzen tut das System nämlich nicht.
Na immerhin.
-- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org