Inspecting /boot/System.map-2.4.10-4GB Loaded 11713 symbols from /boot/System.map-2.4.10-4GB. Symbols match kernel version 2.4.10. Loaded 19 symbols from 2 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000e7800 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 00000000040fdc00 (usable) <4> BIOS-e820: 00000000040fdc00 - 00000000040ff800 (ACPI data) <4> BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS) <4> BIOS-e820: 00000000040ffc00 - 0000000010000000 (usable) <4> BIOS-e820: 00000000fffe7800 - 0000000100000000 (reserved) <4>On node 0 totalpages: 65536 <4>zone(0): 4096 pages. <4>zone(1): 61440 pages. <4>zone(2): 0 pages. <4>Local APIC disabled by BIOS -- reenabling. <4>Found and enabled local APIC! <4>Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz enableapic vga=0x0317 <6>Initializing CPU#0 <4>Detected 448.061 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 894.56 BogoMIPS <4>Memory: 254936k/262144k available (1289k kernel code, 6808k reserved, 381k data, 124k init, 0k highmem) <4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) <4>Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) <4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes) <7>CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 512K <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 <7>CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 <7>CPU: Common caps: 0183fbff 00000000 00000000 00000000 <4>CPU: Intel Pentium II (Deschutes) stepping 02 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000040 <4>ESR value after enabling vector: 00000000 <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 448.0775 MHz. <4>..... host bus clock speed is 99.5726 MHz. <4>cpu: 0, clocks: 995726, slice: 497863 <4>CPU0 <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <4>PCI: PCI BIOS revision 2.10 entry at 0xfd9a3, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 2: assuming transparent <6>PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 <6>Limiting direct PCI/PCI transfers. <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS not found. <4>Starting kswapd <5>VFS: Diskquotas version dquot_6.5.0 initialized <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>Real Time Clock Driver v1.10e <4>block: 128 slots per queue, batch=16 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>PIIX4: IDE controller on PCI bus 00 dev 39 <4>PIIX4: chipset revision 1 <4>PIIX4: not 100%% native mode: will probe irqs later <4> ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio <4> ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio <4>hda: IC35L060AVVA07-0, ATA DISK drive <4>hdc: CD-ROM CDU701, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>hda: 120103200 sectors (61493 MB) w/1863KiB Cache, CHS=7476/255/63, UDMA(33) <4>hdc: ATAPI 14X CD-ROM drive, 128kB Cache, DMA <6>Uniform CD-ROM driver Revision: 3.12 <4>ide-floppy driver 0.97.sv <6>Partition check: <6> hda: hda1 hda2 hda3 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>loop: loaded (max 8 devices) <4>ide-floppy driver 0.97.sv <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <4>md: autorun ... <4>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 2048 buckets, 16Kbytes <4>TCP: Hash tables configured (established 16384 bind 16384) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing....................................................done. <4>Freeing initrd memory: 551k freed <4>VFS: Mounted root (ext2 filesystem). <4>PCI: Enabling device 00:0f.0 (0114 -> 0117) <6>PCI: Found IRQ 10 for device 00:0f.0 <6>sym53c8xx: at PCI bus 0, device 15, function 0 <4>sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) <6>sym53c8xx: 53c810a detected <6>sym53c810a-0: rev 0x23 on pci bus 0 device 15 function 0 irq 10 <6>sym53c810a-0: ID 7, Fast-10, Parity Checking <6>scsi0 : sym53c8xx-1.7.3c-20010512 <4> Vendor: SONY Model: SDT-5000 Rev: 3.30 <4> Type: Sequential-Access ANSI SCSI revision: 02 <4>FAT: bogus logical sector size 0 <4>FAT: bogus logical sector size 0 <4>reiserfs: checking transaction log (device 03:03) ... <4>Using r5 hash to sort names <4>reiserfs: using 3.5.x disk format <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>change_root: old root has d_count=2 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 124k freed <6>Adding Swap: 514072k swap-space (priority -1) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Wed Oct 9 11:06:05 2002 Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.24a (02-Sep-2001) <-------------reiserfsck, 2001-------------> reiserfsprogs 3.x.0k-pre9 /dev/hda1: clean, 28/28112 files, 7108/56196 blocks doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda1 on /boot type ext2 (rw) doneActivating remaining swap-devices in /etc/fstab... doneSetting up the CMOS clockdone Setting up timezone datadone Setting up loopback devicedone Setting up hostnamedone Mount SHM FS on /dev/shmdone Configuring serial ports... Configured serial ports doneRunning /etc/init.d/boot.local doneCreating /var/log/boot.msg donekillproc: kill(26,29) Enabling syn flood protectiondone Disabling IP forwardingdone Boot logging started on /dev/tty1(/dev/console) at Wed Oct 9 09:06:11 2002 Master Resource Control: previous runlevel: N, switching to runlevel: 3 killproc: kill(26,3) INIT: Entering runlevel: 3 /etc/init.d/rc3.d/S01dummy start '/etc/init.d/rc3.d/S01dummy start' exits with status 0 /etc/init.d/rc3.d/S01random start Initializing random number generatordone '/etc/init.d/rc3.d/S01random start' exits with status 0 /etc/init.d/rc3.d/S05network start Setting up network device eth0 done'/etc/init.d/rc3.d/S05network start' exits with status 0 /etc/init.d/rc3.d/S06hotplug start Starting hotplugging services [ usb ]done '/etc/init.d/rc3.d/S06hotplug start' exits with status 0 /etc/init.d/rc3.d/S07route start Setting up routing (using /etc/route.conf)done '/etc/init.d/rc3.d/S07route start' exits with status 0 /etc/init.d/rc3.d/S09nfs start '/etc/init.d/rc3.d/S09nfs start' exits with status 0 /etc/init.d/rc3.d/S09snmpd start '/etc/init.d/rc3.d/S09snmpd start' exits with status 0 /etc/init.d/rc3.d/S09sshd start Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=R201SLXT CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=25 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done '/etc/init.d/rc3.d/S09sshd start' exits with status 0 /etc/init.d/rc3.d/S09syslog start Starting syslog servicesstartproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=R201SLXT CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=25 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/syslogd ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=R201SLXT CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=25 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/klogd ] done