Inspecting /boot/System.map-2.6.18.2-34-default Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) <4> BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data) <4> BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS) <4> BIOS-e820: 000000001bf00000 - 000000001c000000 (usable) <4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>448MB LOWMEM available. <7>On node 0 totalpages: 114688 <7> DMA zone: 4096 pages, LIFO batch:0 <7> Normal zone: 110592 pages, LIFO batch:31 <6>DMI present. <6>Using APIC driver default <6>IO/L-APIC allowed because system is MP or new enough <7>ACPI: RSDP (v000 PTLTD ) @ 0x000f7500 <7>ACPI: RSDT (v001 PTLTD RSDT 0x06040001 LTP 0x00000000) @ 0x1befbd21 <7>ACPI: FADT (v001 FSC D1218/19 0x06040001 0x000f4240) @ 0x1befbd51 <7>ACPI: MADT (v001 FSC APIC 0x06040001 CSF 0x00000000) @ 0x1befef7e <7>ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x1befefd8 <7>ACPI: DSDT (v001 FSC D1218/19 0x06040001 MSFT 0x0100000c) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0xf008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 6:8 APIC version 17 <6>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) <4>Detected 770.792 MHz processor. <4>Built 1 zonelists. Total pages: 114688 <5>Kernel command line: root=/dev/hdb6 vga=0x31a resume=/dev/hdb5 splash=silent <6>bootsplash: silent mode. <7>mapped APIC to ffffd000 (fee00000) <7>mapped IOAPIC to ffffc000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 2048 (order: 11, 8192 bytes) <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>Memory: 447912k/458752k available (1697k kernel code, 10144k reserved, 968k data, 196k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 1542.88 BogoMIPS (lpj=3085761) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 <7>CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 256K <7>CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 16k freed <6>checking if image is initramfs... it is <6>Freeing initrd memory: 2830k freed <6>ACPI: Core revision 20060707 <4>CPU0: Intel Pentium III (Coppermine) stepping 06 <6>Total of 1 processors activated (1542.88 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>Brought up 1 CPUs <4>migration_cost=0 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xfd963, last bus=2 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <4>PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO <4>PCI quirk: region f180-f1bf claimed by ICH4 GPIO <7>Boot video device is 0000:01:00.0 <4>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: Device [ECP] status [00000008]: functional but not present; setting present <4>ACPI: Device [GAME] status [00000008]: functional but not present; setting present <4>ACPI: Device [MIDI] status [00000008]: functional but not present; setting present <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 13 devices <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <3>PCI: Failed to allocate mem resource #6:10000@f8000000 for 0000:01:00.0 <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: f4000000-f4ffffff <6> PREFETCH window: f6000000-f7ffffff <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: 3000-3fff <6> MEM window: f5000000-f50fffff <6> PREFETCH window: disabled. <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes) <4>TCP established hash table entries: 16384 (order: 5, 131072 bytes) <4>TCP bind hash table entries: 8192 (order: 4, 65536 bytes) <6>TCP: Hash tables configured (established 16384 bind 8192) <6>TCP reno registered <6>Simple Boot Flag at 0x69 set to 0x1 <6>Machine check exception polling timer started. <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) <5>apm: overridden by ACPI. <6>audit: initializing netlink socket (disabled) <5>audit(1184163545.176:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>vesafb: framebuffer at 0xf6000000, mapped to 0xdc880000, using 4096k, total 4096k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=0 <6>vesafb: protected mode interface info at c000:0368 <6>vesafb: pmi: set display start = c00c03a1, set palette = c00c0417 <6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 107318 bytes,<6> does not fit into framebuffer. <6>...found (1280x1024, 59769 bytes, v3). <4>Console: switching to colour frame buffer device 156x60 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>ACPI: (supports S0 S1 S3 S4 S5) <6>Freeing unused kernel memory: 196k freed <6>Time: tsc clocksource has been installed. <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH2: IDE controller at PCI slot 0000:00:1f.1 <6>ICH2: chipset revision 17 <6>ICH2: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x2400-0x2407, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0x2408-0x240f, BIOS settings: hdc:DMA, hdd:pio <7>Probing IDE interface ide0... <4>hda: WDC WD200BB-00CJA1, ATA DISK drive <4>hdb: ST340016A, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: max request size: 128KiB <6>hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100) <6>hda: cache flushes not supported <6> hda: hda1 hda2 <6>hdb: max request size: 128KiB <6>hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) <6>hdb: cache flushes not supported <6> hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 > <7>Probing IDE interface ide1... <4>hdc: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive <4>hdd: FX001DE, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb6, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>JBD: barrier-based sync failed on hdb6 - disabling barriers <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] <6>lp0: using parport0 (interrupt-driven). <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>Linux agpgart interface v0.101 (c) Dave Jones <6>agpgart: Detected an Intel i815 Chipset. <6>agpgart: AGP aperture is 64M @ 0xf8000000 <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>USB Universal Host Controller Interface driver v3.0 <6>ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 169 <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>uhci_hcd 0000:00:1f.2: UHCI Host Controller <6>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1f.2: irq 169, io base 0x00001000 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb1: SerialNumber: 0000:00:1f.2 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 177 <7>PCI: Setting latency timer of device 0000:00:1f.4 to 64 <6>uhci_hcd 0000:00:1f.4: UHCI Host Controller <6>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1f.4: irq 177, io base 0x00001800 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1f.4 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>i8xx TCO timer: initialized (0xf060). heartbeat=30 sec (nowayout=0) <3>intel_rng: FWH not detected <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 185 <6>usb 1-2: new low speed USB device using uhci_hcd and address 2 <6>usb 1-2: new device found, idVendor=1241, idProduct=1503 <6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 1-2: Product: USB Keyboard <6>usb 1-2: Manufacturer: <6>usb 1-2: configuration #1 chosen from 1 choice <6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 185 <7>PCI: Setting latency timer of device 0000:00:1f.5 to 64 <4>JBD: barrier-based sync failed on hdb6 - disabling barriers <6>intel8x0_measure_ac97_clock: measured 56300 usecs <6>intel8x0: clocking to 49472 <6>hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA <6>Uniform CD-ROM driver Revision: 3.20 <6>hdd: ATAPI 4X CD-ROM drive, 128kB Cache <7>ieee1394: Initialized config rom entry `ip1394' <6>ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 22 (level, low) -> IRQ 193 <6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[193] MMIO=[f5001000-f50017ff] Max Packet=[2048] IR/IT contexts=[4/8] <6>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI <6>e100: Copyright(c) 1999-2005 Intel Corporation <6>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 201 <6>e100: eth0: e100_probe: addr 0xf5000000, irq 201, MAC addr 00:30:05:21:53:E6 <6>usbcore: registered new driver hiddev <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[2000000004001f9a] <6>input: USB Keyboard as /class/input/input2 <6>input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1f.2-2 <6>input: USB Keyboard as /class/input/input3 <6>input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1f.2-2 <6>usbcore: registered new driver usbhid <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver <6>Adding 682720k swap on /dev/hdb5. Priority:-1 extents:1 across:682720k <6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com <4>JBD: barrier-based sync failed on hdb6 - disabling barriers <6>loop: loaded (max 8 devices) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdb7, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>NTFS driver 2.1.27 [Flags: R/W MODULE]. <6>NTFS volume version 3.1. <6>NTFS volume version 3.1. <6>NTFS volume version 3.1. <6>AppArmor: AppArmor initialized <5>audit(1184163564.769:2): AppArmor initialized <4> Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Wed Jul 11 14:19:06 2007 Trying manual resume from /dev/hdb5 Creating device nodes with udev Loading ide-core Loading ide-disk Loading processor Loading thermal Loading piix Loading fan Loading edd Loading jbd Loading mbcache Loading ext3 Invoking userspace resume from /dev/hdb5 resume: Could not stat configuration file resume: libgcrypt version: 1.2.3 resume: Could not read the image Invoking in-kernel resume from /dev/hdb5 Waiting for device /dev/hdb6 to appear: ok fsck 1.39 (29-May-2006) [/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/hdb6 /dev/hdb6: clean, 130594/738944 files, 839171/1475964 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/hdb6 Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Jul 11 16:19:12 2007 boot.udev start Starting udevd done 'boot.udev start' exits with status 0 boot.rootfsck start Activating swap-devices in /etc/fstab... done'boot.rootfsck start' exits with status 0 boot.loadmodules start Loading required kernel modules done'boot.loadmodules start' exits with status 0 boot.preload_early start done 'boot.preload_early start' exits with status 0 boot.scpm start 'boot.scpm start' exits with status 0 boot.device-mapper start Activating device mapper... done 'boot.device-mapper start' exits with status 0 boot.md start Starting MD Raid done 'boot.md start' exits with status 0 boot.lvm start Waiting for udev to settle... Scanning for LVM volume groups... Reading all physical volumes. This may take a while... No volume groups found No volume groups found Activating LVM volume groups... No volume groups found done 'boot.lvm start' exits with status 0 boot.localfs start Checking file systems... fsck 1.39 (29-May-2006) /dev/hdb7: clean, 2269/1077120 files, 101072/2152702 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb7 on /home type ext3 (rw,acl,user_xattr) /dev/hda1 on /windows/C type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8) /dev/hda2 on /windows/D type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8) /dev/hdb1 on /windows/E type ntfs (ro,noexec,nosuid,nodev,gid=100,umask=0002,nls=utf8) done'boot.localfs start' exits with status 0 boot.apparmor start Loading AppArmor module done Mounting securityfs on /sys/kernel/security done Loading AppArmor profiles done 'boot.apparmor start' exits with status 0 boot.cleanup start 'boot.cleanup start' exits with status 0 boot.clock start Setting up the hardware clockdone 'boot.clock start' exits with status 0 boot.cycle start 'boot.cycle start' exits with status 6 boot.klog start Creating /var/log/boot.msg donekillproc: kill(847,29) 'boot.klog start' exits with status 0 boot.proc start 'boot.proc start' exits with status 0 boot.sysctl start Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done 'boot.sysctl start' exits with status 0 boot.udev_retry start 'boot.udev_retry start' exits with status 0 boot.videobios start 'boot.videobios start' exits with status 0 boot.crypto start 'boot.crypto start' exits with status 0 boot.ipconfig start Enabling syn flood protectiondone Disabling IP forwardingdone done 'boot.ipconfig start' exits with status 0 boot.localnet start Setting up hostname 'christian'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 done 'boot.localnet start' exits with status 0 boot.preload start done 'boot.preload start' exits with status 0 boot.swap start Activating remaining swap-devices in /etc/fstab... done'boot.swap start' exits with status 0 SuSEfirewall2_init start Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done 'SuSEfirewall2_init start' exits with status 0 boot.ldconfig start 'boot.ldconfig start' exits with status 0 System Boot Control: The system has been set up Skipped features: boot.cycle System Boot Control: Running /etc/init.d/boot.local donekillproc: kill(847,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Wed Jul 11 14:19:35 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Entering runlevel: 5 Loading AppArmor profiles - AppArmor already loaded with profiles.skipped done startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/acpid ] acpid: loading ACPI modules ( ac battery button ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) done Starting acpid done startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone Starting D-Bus daemondone Initializing random number generatordone startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting jexec servicesStarting irqbalance unused Starting resource managerdone startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable doneStarting HAL daemondone Loading CPUFreq modules (CPUFreq not supported) Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (rev 03) eth0 configuration: eth-id-00:30:05:21:53:e6 startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] eth0 (DHCP) . . . . . pidofproc: dhcpcd 3113 IP/Netmask: 192.168.178.21 / 255.255.255.0 ('christian') doneSetting up service network . . . . . . . . . . . . . . . .done Starting service kdmdone Starting auditd startproc: execve (/sbin/auditd) [ /sbin/auditd -n ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/auditd ] Mount SMB/ CIFS File Systems unused startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/sbin/portmap ] killproc: kill(2481,20) done Starting RPC portmap daemondone killproc: kill(2473,1) killproc: kill(2481,18) killproc: kill(2481,12) Importing Net File System (NFS)unused Starting nfsboot (sm-notify) done startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Starting cupsddone Checking/updating CPU microcode done Starting ZENworks Management Daemondone startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] Starting SSH daemondone checkproc: /opt/kde3/bin/kdm 3169 startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done Try to get initial date and time via NTP from de.pool.ntp.orgdone Starting network time protocol daemon (NTPD)startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ] done startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone Starting mail service (Postfix)checkproc: /opt/kde3/bin/kdm 3169 done Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/hdb6 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: irq_balancer smbfs nfs killproc: kill(2397,3)