Hi, nach der Installation von SuSE 9.1 Prof. läuft meine 2. Festplatte (hdc) nicht mehr im DMA-Modus - stattdessen bekomme ich stets Fehlermeldungen (DriveReady SeekComplete Error etc.) in /var/log/boot.msg: <6>hdc: Host Protected Area detected. <4> current capacity is 58633344 sectors (30020 MB) <4> native capacity is 58633345 sectors (30020 MB) <6>hdc: Host Protected Area disabled. <6>hdc: 58633345 sectors (30020 MB) w/1024KiB Cache, CHS=58168/16/63, UDMA(66) <6> hdc:hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <4>hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hdc: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=58633344, sector=58633344 <6>hdc: DMA disabled <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>end_request: I/O error, dev hdc, sector 58633344 <3>Buffer I/O error on device hdc, logical block 58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>ide1: reset: success <4>hdc: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } <4>hdc: read_intr: error=0x10 { SectorIdNotFound }, LBAsect=58698623, sector=58633344 <4>end_request: I/O error, dev hdc, sector 58633344 <3>Buffer I/O error on device hdc, logical block 58633344 <4> hdc1 Kann mir jemand sagen, wie ich meine Festplatte doch noch dazu bringe, den DMA-Modus zu benutzen (hat unter SuSE 8.1 schliesslich auch funktioniert)? Danke schon mal - Stephan