Inspecting /boot/System.map-2.6.22.5-31-default Loaded 26158 symbols from /boot/System.map-2.6.22.5-31-default. Symbols match kernel version 2.6.22. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) <4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved) <4> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001bef0000 (usable) <4> BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data) <4> BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS) <4> BIOS-e820: 000000001bf00000 - 000000001c000000 (usable) <4> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) <4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) <5>0MB HIGHMEM available. <5>448MB LOWMEM available. <7>Entering add_active_range(0, 0, 114688) 0 entries of 256 used <4>Zone PFN ranges: <4> DMA 0 -> 4096 <4> Normal 4096 -> 114688 <4> HighMem 114688 -> 114688 <4>early_node_map[1] active PFN ranges <4> 0: 0 -> 114688 <7>On node 0 totalpages: 114688 <7> DMA zone: 32 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 4064 pages, LIFO batch:0 <7> Normal zone: 864 pages used for memmap <7> Normal zone: 109728 pages, LIFO batch:31 <7> HighMem zone: 0 pages used for memmap <6>DMI present. <6>Using APIC driver default <4>ACPI: RSDP 000F7500, 0014 (r0 PTLTD ) <4>ACPI: RSDT 1BEFBD21, 0030 (r1 PTLTD RSDT 6040001 LTP 0) <4>ACPI: FACP 1BEFBD51, 0074 (r1 FSC D1218/19 6040001 F4240) <4>ACPI: DSDT 1BEFBDC5, 31B9 (r1 FSC D1218/19 6040001 MSFT 100000C) <4>ACPI: FACS 1BEFFFC0, 0040 <4>ACPI: APIC 1BEFEF7E, 005A (r1 FSC APIC 6040001 CSF 0) <4>ACPI: BOOT 1BEFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040001 LTP 1) <6>ACPI: PM-Timer IO Port: 0xf008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 6:8 APIC version 17 <6>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000) <4>Built 1 zonelists. Total pages: 113792 <5>Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 vga=0x31a resume=/dev/sdb5 splash=silent <6>bootsplash: silent mode. <7>mapped APIC to ffffd000 (fee00000) <7>mapped IOAPIC to ffffc000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 2048 (order: 11, 8192 bytes) <4>Detected 770.188 MHz processor. <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>Memory: 446696k/458752k available (1825k kernel code, 11440k reserved, 764k data, 228k init, 0k highmem) <4>virtual kernel memory layout: <4> fixmap : 0xffdf4000 - 0xfffff000 (2092 kB) <4> pkmap : 0xff800000 - 0xffc00000 (4096 kB) <4> vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) <4> lowmem : 0xc0000000 - 0xdc000000 ( 448 MB) <4> .init : 0xc038e000 - 0xc03c7000 ( 228 kB) <4> .data : 0xc02c86ed - 0xc0387964 ( 764 kB) <4> .text : 0xc0100000 - 0xc02c86ed (1825 kB) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 1541.45 BogoMIPS (lpj=3082911) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 256K <7>CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 12k freed <6>Unpacking initramfs... done <6>Freeing initrd memory: 4052k freed <6>ACPI: Core revision 20070126 <4>Parsing all Control Methods: <4>Table [DSDT](id 0001) - 411 Objects with 48 Devices 106 Methods 13 Regions <4> tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired <4>evxfevnt-0091 [00] enable : Transition to ACPI mode successful <4>CPU0: Intel Pentium III (Coppermine) stepping 06 <6>Total of 1 processors activated (1541.45 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>Brought up 1 CPUs <6>Booting paravirtualized kernel on bare hardware <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xfd963, last bus=2 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 <4>evgpeblk-0956 [00] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9 <4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime GPEs in this block <4>evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 1 Wake, Enabled 0 Runtime GPEs in this block <4>Completing Region/Field/Buffer/Package initialization:................................................................ <4>Initialized 11/13 Regions 6/6 Fields 35/35 Buffers 12/18 Packages (420 nodes) <4>Initializing Device/Processor/Thermal objects by executing _INI methods:.. <4>Executed 2 _INI methods requiring 3 _STA executions (examined 51 objects) <6>ACPI: Interpreter enabled <6>ACPI: (supports S0 S1 S3 S4 S5) <6>ACPI: Using IOAPIC for interrupt routing <4>ACPI: Device [ECP] status [00000008]: functional but not present; setting present <4>ACPI: Device [GAME] status [00000008]: functional but not present; setting present <4>ACPI: Device [MIDI] status [00000008]: functional but not present; setting present <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <4>PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO <4>PCI quirk: region f180-f1bf claimed by ICH4 GPIO <4>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling <6>PCI: Transparent bridge - 0000:00:1e.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>ACPI: bus type pnp registered <6>pnp: PnP ACPI: found 13 devices <6>ACPI: ACPI bus type pnp unregistered <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <4>ACPI: RTC can wake from S4 <6>Time: tsc clocksource has been installed. <3>PCI: Failed to allocate mem resource #6:10000@f8000000 for 0000:01:00.0 <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: f4000000-f4ffffff <6> PREFETCH window: f6000000-f7ffffff <6>PCI: Bridge: 0000:00:1e.0 <6> IO window: 3000-3fff <6> MEM window: f5000000-f50fffff <6> PREFETCH window: disabled. <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes) <4>TCP established hash table entries: 16384 (order: 5, 196608 bytes) <4>TCP bind hash table entries: 16384 (order: 5, 131072 bytes) <6>TCP: Hash tables configured (established 16384 bind 16384) <6>TCP reno registered <6>Simple Boot Flag at 0x69 set to 0x1 <6>Machine check exception polling timer started. <6>audit: initializing netlink socket (disabled) <5>audit(1193148808.716:1): initialized <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <7>Boot video device is 0000:01:00.0 <6>vesafb: framebuffer at 0xf6000000, mapped to 0xdc880000, using 4096k, total 4096k <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=0 <6>vesafb: protected mode interface info at c000:0368 <6>vesafb: pmi: set display start = c00c03a1, set palette = c00c0417 <6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>bootsplash 3.1.6-2004/03/31: looking for picture... <6>bootsplash: silentjpeg size 98233 bytes <4>bootsplash: does not fit into framebuffer. <6>bootsplash: ...found (1280x1024, 35219 bytes, v3). <4>Console: switching to colour frame buffer device 156x60 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>Switched to NOHz mode on CPU #0 <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>Freeing unused kernel memory: 228k freed <5>SCSI subsystem initialized <7>libata version 3.00 loaded. <7>ata_piix 0000:00:1f.1: version 2.11 <7>PCI: Setting latency timer of device 0000:00:1f.1 to 64 <6>scsi0 : ata_piix <6>scsi1 : ata_piix <6>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012400 irq 14 <6>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012408 irq 15 <6>ata1.00: ATA-5: WDC WD200BB-00CJA1, 17.07W17, max UDMA/100 <6>ata1.00: 39102336 sectors, multi 16: LBA <6>ata1.01: ATA-5: ST340016A, 3.19, max UDMA/100 <6>ata1.01: 78165360 sectors, multi 16: LBA <6>ata1.00: configured for UDMA/100 <6>ata1.01: configured for UDMA/100 <6>ata2.00: ATAPI: HL-DT-ST GCE-8160B, 1.02, max MWDMA2 <6>ata2.01: ATAPI: XF00D1 E, G06, max PIO3, CDB intr <6>ata2.00: configured for MWDMA2 <6>ata2.01: configured for PIO3 <5>scsi 0:0:0:0: Direct-Access ATA WDC WD200BB-00CJ 17.0 PQ: 0 ANSI: 5 <5>scsi 0:0:1:0: Direct-Access ATA ST340016A 3.19 PQ: 0 ANSI: 5 <5>scsi 1:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8160B 1.02 PQ: 0 ANSI: 5 <5>scsi 1:0:1:0: CD-ROM MITSUMI CD-ROM !B G06 PQ: 0 ANSI: 5 <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>USB Universal Host Controller Interface driver v3.0 <6>ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 16 <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>uhci_hcd 0000:00:1f.2: UHCI Host Controller <6>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 <6>uhci_hcd 0000:00:1f.2: irq 16, io base 0x00001000 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: UHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd <6>usb usb1: SerialNumber: 0000:00:1f.2 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 2 ports detected <5>sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 17 <7>PCI: Setting latency timer of device 0000:00:1f.4 to 64 <6>uhci_hcd 0000:00:1f.4: UHCI Host Controller <6>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:1f.4: irq 17, io base 0x00001800 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:1f.4 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <5>sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors (20020 MB) <5>sd 0:0:0:0: [sda] Write Protect is off <7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sda: sda1 sda2 <5>sd 0:0:0:0: [sda] Attached SCSI disk <5>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) <5>sd 0:0:1:0: [sdb] Write Protect is off <7>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>usb 1-2: new low speed USB device using uhci_hcd and address 2 <5>sd 0:0:1:0: [sdb] 78165360 512-byte hardware sectors (40021 MB) <5>sd 0:0:1:0: [sdb] Write Protect is off <7>sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 > <5>sd 0:0:1:0: [sdb] Attached SCSI disk <6>usb 1-2: new device found, idVendor=1241, idProduct=1503 <6>usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 1-2: Product: USB Keyboard <6>usb 1-2: Manufacturer: <6>usb 1-2: configuration #1 chosen from 1 choice <6>usbcore: registered new interface driver hiddev <6>input: USB Keyboard as /class/input/input2 <6>input: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1f.2-2 <6>input: USB Keyboard as /class/input/input3 <6>input: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1f.2-2 <6>usbcore: registered new interface driver usbhid <6>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver <4>swsusp: Basic memory bitmaps created <4>swsusp: Basic memory bitmaps freed <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sdb6, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>sd 0:0:1:0: Attached scsi generic sg1 type 0 <5>scsi 1:0:0:0: Attached scsi generic sg2 type 5 <5>scsi 1:0:1:0: Attached scsi generic sg3 type 5 <6>iTCO_vendor_support: vendor-support=0 <6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) <6>iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0xf060) <6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <3>intel_rng: FWH not detected <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>Linux agpgart interface v0.102 (c) Dave Jones <6>agpgart: Detected an Intel i815 Chipset. <6>agpgart: AGP aperture is 64M @ 0xf8000000 <4>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 1:0:0:0: Attached scsi CD-ROM sr0 <6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 18 <4>sr1: scsi3-mmc drive: 4x/4x xa/form2 tray <7>sr 1:0:1:0: Attached scsi CD-ROM sr1 <6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18 <7>PCI: Setting latency timer of device 0000:00:1f.5 to 64 <6>input: Power Button (FF) as /class/input/input4 <6>ACPI: Power Button (FF) [PWRF] <6>input: Power Button (CM) as /class/input/input5 <6>ACPI: Power Button (CM) [PWRB] <6>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI <6>e100: Copyright(c) 1999-2006 Intel Corporation <6>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 <4>rtc_cmos: probe of 00:04 failed with error -16 <6>intel8x0_measure_ac97_clock: measured 54155 usecs <6>intel8x0: clocking to 49513 <6>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 19 <6>e100: eth0: e100_probe: addr 0xf5000000, irq 19, MAC addr 00:30:05:21:53:E6 <6>ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 22 (level, low) -> IRQ 20 <6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[f5001000-f50017ff] Max Packet=[2048] IR/IT contexts=[4/8] <6>parport_pc 00:0a: reported by Plug and Play ACPI <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[2000000004001f9a] <6>Adding 682720k swap on /dev/sdb5. Priority:-1 extents:1 across:682720k <6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com <6>loop: module loaded <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sdb7, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <4>fuse init (API version 7.8) <6>AppArmor: AppArmor initialized <5>audit(1193148825.216:2): type=1505 info="AppArmor initialized" pid=1845 Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Tue Oct 23 14:13:30 2007 Creating device nodes with udev Trying manual resume from /dev/sdb5 Invoking userspace resume from /dev/sdb5 resume: Could not stat configuration file resume: libgcrypt version: 1.2.4 Trying manual resume from /dev/sdb5 Invoking in-kernel resume from /dev/sdb5 Waiting for device /dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 to appear: ok fsck 1.40.2 (12-Jul-2007) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 /dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6: clean, 131273/738944 files, 815464/1475964 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 Boot logging started on /dev/tty1(/dev/console (deleted)) at Tue Oct 23 16:13:36 2007 done Starting udevd udevd-event[1662]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it done Loading required kernel modules doneActivating swap-devices in /etc/fstab... donemount: according to mtab, /dev/sdb6 is already mounted on / Activating device mapper... done Checking file systems... fsck 1.40.2 (12-Jul-2007) /dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part7: clean, 12155/1077120 files, 293094/2152702 blocks donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/sdb7 on /home type ext3 (rw,acl,user_xattr) donekillproc: kill(1053,29) Creating /var/log/boot.msg doneSetting up the hardware clockdone Mounting securityfs on /sys/kernel/security done Loading AppArmor module done Loading AppArmor profiles done Activating remaining swap-devices in /etc/fstab... doneConfiguring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneSetting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 fs.inotify.max_user_watches = 65536 done Enabling syn flood protectiondone Disabling IP forwardingdone done Setting up hostname 'pc-christian'done Setting up loopback interface lo lo IP address: 127.0.0.1/8 Checking for network time protocol daemon (NTPD): unused Can't determine current runlevel done System Boot Control: The system has been set up Skipped features: boot.cycle System Boot Control: Running /etc/init.d/boot.local donekillproc: kill(1053,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Tue Oct 23 14:13:50 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Entering runlevel: 5 --systemstartproc: execve (/bin/dbus-daemon) [ /bin/dbus-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/bin/dbus-daemon ] startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting resource managerdone Starting D-Bus daemondone Unknown username "gdm" in message bus configuration file Starting acpid startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/sbin/acpid ] acpid: starting up done acpid: 0 rules loaded startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog services.done Starting ConsoleKitstartproc: execve (/usr/sbin/console-kit-daemon) [ /usr/sbin/console-kit-daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/console-kit-daemon ] done Starting HAL daemonstartproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/hald ] done Loading CPUFreq modules (CPUFreq not supported) Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done Starting service kdmstartproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done Starting the DHCP DBUS Daemonstartproc: execve (/usr/sbin/dhcdbd) [ /usr/sbin/dhcdbd --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/dhcdbd ] done Starting the NetworkManagerDispatcherstartproc: execve (/usr/sbin/NetworkManagerDispatcher) [ /usr/sbin/NetworkManagerDispatcher ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManagerDispatcher ] done Starting the NetworkManagerstartproc: execve (/usr/sbin/NetworkManager) [ /usr/sbin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 OLDPWD=/etc/sysconfig/network LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/sbin:/usr/sbin:/bin:/usr/bin:/etc/sysconfig/network/scripts vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/NetworkManager ] done Starting Samba NMB daemon startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ] done Mount CIFS File Systems unused checkproc: /opt/kde3/bin/kdm 2423 Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable donecheckproc: /opt/kde3/bin/kdm 2423 Starting auditd startproc: execve (/sbin/auditd) [ /sbin/auditd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/sbin/auditd ] done Starting Avahi daemonstartproc: execve (/usr/sbin/avahi-daemon) [ /usr/sbin/avahi-daemon -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-daemon ] .done Starting Avahi DNS Configuration daemonstartproc: execve (/usr/sbin/avahi-dnsconfd) [ /usr/sbin/avahi-dnsconfd -D ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/avahi-dnsconfd ] done Starting irqbalance unused Checking/updating CPU microcode done Try to get initial date and time via NTP from de.pool.ntp.orgdone Starting network time protocol daemon (NTPD)startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -u ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ] done Starting Name Service Cache Daemonstartproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done Starting RPC portmap daemonstartproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/sbin/portmap ] done Starting cupsdstartproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ] done Starting mail service (Postfix)startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/sbin:/usr/bin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg LANG=de_DE.UTF-8 PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 LC_CTYPE= splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/smbd ] Initializing random number generatordone Starting Samba SMB daemon done done Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting smartd startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/smartd ] done Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/scsi-SATA_ST340016A_3HSBFEGG-part6 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done Starting Firewall Initialization (phase 2 of 2) done done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: smbfs irq_balancer killproc: kill(2091,3)