Jan 15 17:42:38 luna kernel: usb 1-3: device descriptor read/all, error -71
Jan 15 17:42:38 luna kernel: usb 1-3: new high speed USB device using ehci_hcd and address 4
Jan 15 17:42:38 luna kernel: usb 1-3: new device found, idVendor=03f0, idProduct=4117
Jan 15 17:42:38 luna kernel: usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=3
Jan 15 17:42:38 luna kernel: usb 1-3: Product: HP LaserJet 1018
Jan 15 17:42:38 luna kernel: usb 1-3: Manufacturer: Hewlett-Packard
Jan 15 17:42:38 luna kernel: usb 1-3: SerialNumber: KP3AVBX
Jan 15 17:42:38 luna kernel: usb 1-3: configuration #1 chosen from 1 choice
Jan 15 17:42:38 luna kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
Jan 15 17:42:38 luna kernel: usbcore: registered new driver usblp
Jan 15 17:42:38 luna kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
/etc/hotplug/usb/hplj1018: foo2zjs: loading HP LaserJet 1018 firmware /usr/share/foo2zjs/firmware/sihp1018.dl to /dev/usb/lp0 ...
Jan 15 17:42:39 luna kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -71
Jan 15 17:42:40 luna kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -71
Jan 15 17:42:44 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:42:49 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:42:54 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:42:54 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:42:59 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:03 luna su: (to root) root on none
Jan 15 17:43:04 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:04 luna kernel: pnp: Device 00:0c disabled.
Jan 15 17:43:05 luna kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
Jan 15 17:43:05 luna kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
Jan 15 17:43:05 luna kernel: parport 0x378: You gave this address, but there is probably no parallel port there!
Jan 15 17:43:05 luna kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE]
Jan 15 17:43:05 luna kernel: pnp: Device 00:0c activated.
Jan 15 17:43:05 luna kernel: parport: PnPBIOS parport detected.
Jan 15 17:43:05 luna kernel: pnp: Device 00:0c disabled.
Jan 15 17:43:05 luna kernel: lp: driver loaded but no devices found
Jan 15 17:43:09 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:12 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:43:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:22 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:27 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:32 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:37 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:42 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:44 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:43:49 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:54 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:43:59 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:01 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:44:06 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:11 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:16 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:21 luna init: Switching to runlevel: 5
Jan 15 17:44:21 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:21 luna kernel: Kernel logging (proc) stopped.
Jan 15 17:44:21 luna kernel: Kernel log daemon terminating.
Jan 15 17:44:22 luna syslog-ng[4011]: syslog-ng version 1.6.11 going down
Jan 15 17:44:22 luna syslog-ng[6626]: syslog-ng version 1.6.11 starting
Jan 15 17:44:23 luna logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/Xservers
Jan 15 17:44:23 luna logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/xdm-config
Jan 15 17:44:24 luna logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/Xservers
Jan 15 17:44:24 luna logger: /etc/init.d/xdm: No changes for /etc/X11/xdm/xdm-config
Jan 15 17:44:27 luna kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 15 17:44:27 luna kernel: [drm] Initialized drm 1.0.1 20051102
Jan 15 17:44:27 luna kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 193
Jan 15 17:44:27 luna kernel: [drm] Initialized i915 1.5.0 20060119 on minor 0
Jan 15 17:44:27 luna syslog-ng[6626]: Changing permissions on special file /dev/xconsole
Jan 15 17:44:27 luna syslog-ng[6626]: Changing permissions on special file /dev/tty10
Jan 15 17:44:27 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:31 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:36 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:38 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:44:41 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:44:46 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:51 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:44:54 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:44:59 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:45:02 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:45:07 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:45:07 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:45:09 luna su: (to root) rosmarie on /dev/pts/2
Jan 15 17:45:12 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:45:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:45:22 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:45:26 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:45:26 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:45:26 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:45:26 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
/etc/hotplug/usb/hplj1018: foo2zjs: ... download failed.
Jan 15 17:45:26 luna kernel: usb 1-3: USB disconnect, address 4
Jan 15 17:45:26 luna kernel: drivers/usb/class/usblp.c: usblp0: removed
Jan 15 17:47:41 luna kernel: usb 1-3: new high speed USB device using ehci_hcd and address 5
Jan 15 17:47:41 luna kernel: usb 1-3: new device found, idVendor=03f0, idProduct=4117
Jan 15 17:47:41 luna kernel: usb 1-3: new device strings: Mfr=1, Product=2, SerialNumber=3
Jan 15 17:47:41 luna kernel: usb 1-3: Product: HP LaserJet 1018
Jan 15 17:47:41 luna kernel: usb 1-3: Manufacturer: Hewlett-Packard
Jan 15 17:47:41 luna kernel: usb 1-3: SerialNumber: KP3AVBX
Jan 15 17:47:41 luna kernel: usb 1-3: configuration #1 chosen from 1 choice
Jan 15 17:47:41 luna kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
/etc/hotplug/usb/hplj1018: foo2zjs: loading HP LaserJet 1018 firmware /usr/share/foo2zjs/firmware/sihp1018.dl to /dev/usb/lp0 ...
Jan 15 17:47:48 luna kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -71
Jan 15 17:47:53 luna kernel: printk: 5963 messages suppressed.
Jan 15 17:47:53 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:47:58 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:48:03 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:48:08 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:48:13 luna kernel: drivers/usb/class/usblp.c: usblp0: error -110 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: nonzero read/write bulk status received: -71
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:17 luna kernel: drivers/usb/class/usblp.c: usblp0: error -71 reading printer status
Jan 15 17:48:18 luna kernel: usb 1-3: USB disconnect, address 5
Jan 15 17:48:18 luna kernel: drivers/usb/class/usblp.c: usblp0: removed
/etc/hotplug/usb/hplj1018: foo2zjs: ... download failed.
Jan 15 17:48:50 luna sudo: rosmarie : TTY=pts/2 ; PWD=/home/rosmarie ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -
Jan 15 17:48:50 luna sudo: rosmarie : TTY=pts/2 ; PWD=/home/rosmarie ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub -