Am 12.07.2017 18:32, schrieb dirk:
Hallo, kürzlich habe ich eine 5TB externe USB-Platte an mein OS 12.2 system angeschlossen und per yast eine verschlüsselte Partition angelegt. Formatiert wurde mit e4fs.
Anfangs lies sich die Platte problemlos beschreiben. Nun aber brechen die Schreibvorgänge nach einiger Zeit ab und Dateizugriffe laufen ins Leere.
Nachstehende Fehlermeldungen werden erzeugt.
Liegt hier ein Hardwaredefekt vor oder liegt es an der Plattengröße oder ggf. an einer Fehlconfiguration.
Eine ebenfalls so behandelte 4TB Platte funktioniert fehlerfrei.
dmesg | grep -i dm-1 ... [12771.842197] lost page write due to I/O error on dm-1 [12957.726516] Buffer I/O error on device dm-1, logical block 244 [12957.726519] lost page write due to I/O error on dm-1 [13143.546899] Buffer I/O error on device dm-1, logical block 50855948 [13143.546902] lost page write due to I/O error on dm-1 [13329.367486] Buffer I/O error on device dm-1, logical block 50855951 [13329.367490] lost page write due to I/O error on dm-1 [13515.187066] Buffer I/O error on device dm-1, logical block 51380225 [13515.187067] lost page write due to I/O error on dm-1 [13515.187072] Buffer I/O error on device dm-1, logical block 51380226 [13515.187074] lost page write due to I/O error on dm-1 [13515.187077] Buffer I/O error on device dm-1, logical block 51380227 [13515.187078] lost page write due to I/O error on dm-1 [13701.007250] Buffer I/O error on device dm-1, logical block 1020264449 [13701.007251] lost page write due to I/O error on dm-1 [13886.829089] Buffer I/O error on device dm-1, logical block 1020323757 [13886.829092] lost page write due to I/O error on dm-1 [14072.649253] Buffer I/O error on device dm-1, logical block 1020323759 [14072.649256] lost page write due to I/O error on dm-1 ...
Kann jemand helfen?
Gruß Dirk
Ich habe heute nochmal die device-Zuordnung geprüft und leider festgestellt, dass aufgrund eines gesteckten usb-Sticks smartctl auf das falsche device gerichtet war. Heute nach dem Rechnerstart war das Schreiben auf der Platte erstmal wieder möglich mit nachstehenden smartctl-Ausgabe: Sobald der Schreibfehler wieder auftritt werde ich nochmal smartctl aufrufen in den thread stellen. Die unten stehende Ausgabe kann ich leider nichts im Hinblick auf den Schreibfehler auswerten. Aber No errors logged sieht nicht nach hw-defekt aus. # smartctl -a -d sat /dev/sdf smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.4.63-2.44-desktop] (SUSE RPM) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST5000DM000-1FK178 Serial Number: xxxxxx LU WWN Device Id: 5 000c50 0a81cf524 Firmware Version: CC49 User Capacity: 5.000.981.078.016 bytes [5,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5980 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Jul 13 09:13:42 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 96) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 614) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 107 100 006 Pre-fail Always - 87270272 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 15 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 061 060 030 Pre-fail Always - 1559966 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 32 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 18 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 062 045 045 Old_age Always In_the_past 38 (Min/Max 33/38) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 87 194 Temperature_Celsius 0x0022 038 055 000 Old_age Always - 38 (0 22 0 0 0) 195 Hardware_ECC_Recovered 0x001a 115 100 000 Old_age Always - 87270272 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 16 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 16 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 96915937034261 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 448295890 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2432142 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org