Hallo, habe so meine Probleme, eine Sony DCR-PC110E Digitamkamera unter SuSe 8.2 zum Laufen zu bringen. Habe unter didkam USB mass storage slektiert, und hier sind einige screen ausgaben von diversen Kommandos: # hwinfo --usb [snip] 08: SCSI 307.0: 10600 Disk [Created at usb.100] Unique ID: B3Fu.y7gVcL7CEuE Hardware Class: disk Model: "Sony DSC" Hotplug: USB Vendor: "Sony" Device: "Sony DSC" Revision: "3.00" USB GUID: 054c002e0000000000000000 Driver: "usb-storage" Device File: /dev/sdc Speed: 1.5 Mbps Size: 63424 sectors a 512 bytes Geometry (Logical): CHS 991/4/16 Config Status: cfg=new, avail=yes, need=no Attached to: #7 (Hub) # fdisk /dev/sdc Disk /dev/sdc: 32 MB, 32473088 bytes 4 heads, 16 sectors/track, 991 cylinders Units = cylinders of 64 * 512 = 32768 bytes Device Boot Start End Blocks Id System /dev/sdc1 * 1 990 31670+ 1 FAT12 # mount /dev/sdc /mnt/camera mount: you must specify the filesystem type # mount -t fat12 /dev/sdc /mnt/camera mount: fs type fat12 not supported by kernel # mount -t fat /dev/sdc /mnt/camera mount: fs type fat not supported by kernel Und hier noch /var/log/messages beim Einschalten der Kamera. Sep 27 22:11:53 linux kernel: I/O error: dev 08:20, sector 0 Sep 27 22:12:00 linux kernel: hub.c: new USB device 00:0e.1-1, assigned address 7 Sep 27 22:12:00 linux kernel: WARNING: USB Mass Storage data integrity not assured Sep 27 22:12:00 linux kernel: USB Mass Storage device found at 7 Sep 27 22:12:05 linux /etc/hotplug/usb.agent[9725]: Can't ignore signal CHLD, forcing to default. .. und während des mounting: Sep 27 22:12:48 linux kernel: FAT: bogus logical sector size 0 Sep 27 22:12:48 linux kernel: VFS: Can't find a valid FAT filesystem on dev 08:20. Sep 27 22:12:48 linux kernel: FAT: bogus logical sector size 0 Sep 27 22:12:48 linux kernel: VFS: Can't find a valid FAT filesystem on dev 08:20. Sep 27 22:12:55 linux modprobe: modprobe: Can't locate module fat12 Any ideas ? Danke Werner