Hallo Manfred, leider hat das auch nicht funktioniert. Wenn ich die xorg.conf entsprechend bearbeite und dasnn X-Window mit 'startx' bleibt der Bildschirm schwarz und nur ein reboot des gesamten Systems hilft. Hast Du vielleicht noch eine Idee?? Im Anhang zur Info die /etc/X11/xorg.conf und die /var/log/Xorg.0.log... Danke und Viele Grüße Klaus PS: Hier die /etc/X11/xorg.conf: # /.../ # SaX generated X11 config file # Created on: 2009-09-08T17:32:50+0200. # # Version: 8.1 # Contact: Marcus Schaefer <sax@suse.de>, 2005 # Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users> # # Automatically generated by [ISaX] (8.1) # PLEASE DO NOT EDIT THIS FILE! # Section "Files" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AutoAddDevices" "off" EndSection Section "Device" Identifier "Device[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection und hier die /var/log/Xorg.0.log: This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.3.901 (1.6.4 RC 1) Release Date: 2009-8-25 X Protocol Version 11, Revision 0 Build Operating System: openSUSE SUSE LINUX Current Operating System: Linux btpbx6 2.6.31-41-desktop #1 SMP PREEMPT 2009-09-14 21:34:43 +0200 x86_64 Build Date: 15 September 2009 12:47:42AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 17 16:36:46 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (==) No screen section available. Using defaults. (**) |-->Screen "Default Screen Section" (0) (**) | |-->Monitor "<default monitor>" (==) No device specified for screen "Default Screen Section". Using the first device section listed. (**) | |-->Device "Device[0]" (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. (**) Option "AutoAddDevices" "off" (**) Not automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/TTF/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/OTF" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/truetype/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, built-ins (**) Input device list set to "/dev/gpmdata,/dev/input/mice" (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" (==) |-->Input Device "<default pointer>" (==) |-->Input Device "<default keyboard>" (==) No Layout section. Using the default mouse configuration. (==) No Layout section. Using the default keyboard configuration. (II) Loader magic: 0x3f7c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (--) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2a42:10cf:1458 rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8 (--) PCI: (0:0:2:1) 8086:2a43:10cf:1458 rev 7, Mem @ 0xf2400000/1048576 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules//extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules//extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules//extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules//extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules//extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib64/xorg/modules//extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (==) Matched intel for the autoconfigured driver (==) Assigned the driver to the xf86ConfigLayout (II) LoadModule: "intel" (II) Loading /usr/lib64/xorg/modules//drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 2.8.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules//input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules//input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D, IGDNG_M (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib64/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset (--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xF2000000 size 4194304 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): Output HDMI-1 has no monitor section (II) intel(0): I2C bus "HDMIDDC_B" initialized. (II) intel(0): HDMI output 1 detected (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output HDMI-2 has no monitor section (II) intel(0): I2C bus "HDMIDDC_C" initialized. (II) intel(0): HDMI output 2 detected (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output HDMI-1 disconnected (II) intel(0): Output HDMI-2 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 32764 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.3.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x30000120 (WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0xa102d800 to 0x3e006f00 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 939776 total, 1 used (II) intel(0): I830CheckAvailableMemory: 3759100 kB available (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x00063fff: compressed frame buffer (400 kB, 0x00000000be000000 physical ) (II) intel(0): 0x00064000-0x00064fff: power context (4 kB) (II) intel(0): 0x01fff000: end of stolen memory (II) intel(0): 0x01fff000-0x0f9fefff: DRI memory manager (223232 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): 0x01fff000: start of memory manager (II) intel(0): 0x02020000-0x02407fff: front buffer (4000 kB) X tiled (II) intel(0): 0x02420000-0x02429fff: HW cursors (40 kB) (II) intel(0): 0x0f9ff000: end of memory manager (WW) intel(0): ESR is 0x00000010, page table error (WW) intel(0): PGTBL_ER is 0x00100000, CS instruction GTT PTE (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 96 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output HDMI-1 is connected to pipe none (II) intel(0): Output HDMI-2 is connected to pipe none (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (EE) AIGLX error: i965 exports no DRI extension (EE) AIGLX: reverting to software rendering (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib64/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 338 x 211 (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-603B05CD50433F04F64C7B12280B8D7BC10853E0.xkm (WW) <default pointer>: No Device specified, looking for one... (II) <default pointer>: Setting Device option to "/dev/input/mice" (--) <default pointer>: Device: "/dev/input/mice" (==) <default pointer>: Protocol: "Auto" (**) Option "CorePointer" (**) <default pointer>: always reports core events (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50 (**) <default pointer>: ZAxisMapping: buttons 4 and 5 (**) <default pointer>: Buttons: 9 (**) <default pointer>: Sensitivity: 1 (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE) (**) <default pointer>: (accel) keeping acceleration scheme 1 (**) <default pointer>: (accel) filter chain progression: 2.00 (**) <default pointer>: (accel) filter stage 0: 20.00 ms (**) <default pointer>: (accel) set acceleration profile 0 (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2" (II) <default pointer>: ps2EnableDataReporting: succeeded (**) Option "CoreKeyboard" (**) <default keyboard>: always reports core events (**) Option "Protocol" "standard" (**) <default keyboard>: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) <default keyboard>: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) <default keyboard>: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) <default keyboard>: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) <default keyboard>: CustomKeycodes disabled (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD) (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-603B05CD50433F04F64C7B12280B8D7BC10853E0.xkm (II) config/hal: Adding input device Video Bus (EE) config/hal: NewInputDeviceRequest failed (8) (II) config/hal: Adding input device PS/2 Generic Mouse (EE) config/hal: NewInputDeviceRequest failed (8) (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad (EE) config/hal: NewInputDeviceRequest failed (8) (II) config/hal: Adding input device AT Translated Set 2 keyboard (EE) config/hal: NewInputDeviceRequest failed (8) (II) config/hal: Adding input device Fujitsu FUJ02B1 (EE) config/hal: NewInputDeviceRequest failed (8) (II) config/hal: Adding input device Fujitsu FUJ02E3 (EE) config/hal: NewInputDeviceRequest failed (8) (II) UnloadModule: "mouse" (II) UnloadModule: "kbd" (II) Open ACPI successful (/var/run/acpid.socket) (II) APM registered successfully (II) intel(0): Kernel reported 939776 total, 1 used (II) intel(0): I830CheckAvailableMemory: 3759100 kB available (II) intel(0): [DRI2] Setup complete (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (EE) intel(0): Failed to initialize kernel memory manager (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. Backtrace: 0: X(xorg_backtrace+0x2d) [0x53873d] 1: X(xf86SigHandler+0x8d) [0x4c0e00] 2: /lib64/libc.so.6 [0x7f468d5006e0] 3: /usr/lib64/libdrm_intel.so.1(drm_intel_bo_alloc+0x3) [0x7f468bf1d993] 4: /usr/lib64/xorg/modules//drivers/intel_drv.so(i830_allocate_memory+0x326) [0x7f468c15cc36] 5: /usr/lib64/xorg/modules//drivers/intel_drv.so(i830_allocate_2d_memory+0xb4) [0x7f468c15d594] 6: /usr/lib64/xorg/modules//drivers/intel_drv.so [0x7f468c152827] 7: /usr/lib64/xorg/modules//drivers/intel_drv.so [0x7f468c157390] 8: X(AddScreen+0x365) [0x433ce5] 9: X(InitOutput+0x1352) [0x48a68d] 10: X(main+0x281) [0x432f02] 11: /lib64/libc.so.6(__libc_start_main+0xe6) [0x7f468d4ec586] 12: X [0x432b79] Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. Manfred Tremmel schrieb:
Am Mittwoch, 16. September 2009 schrieb Klaus Becker:
Ok, ich habe des Repository wieder mit aufgenommen...
Nun sind nur noch folgende xorg-x11-drive-Pakete installiert: xorg-x11-driver-video-unichrome-20090829-3.10 xorg-x11-driver-video-radeonhd-1.2.4_121202_4e89726-2.1.1 xorg-x11-driver-video-7.4-125.2
Doch leider hängt sich Sax2 schon viel früher auf.
Las sax2 mal komplett außen vor, die aktuellen xorg Versionen konfigurieren sich ja selbst. Lösche mal aus der /etc/X11/xorg.conf die
Section "Module" Section "Monitor" Section "Modes" Section "Screen"
Und alle Optionen aus
Section "Device"
Dann starte X einfach.
-- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org