Hallo,
ich möchte mein Posting noch um ein paar Angaben ergänzen. Und zwar handelt
es sich hierbei um praktische Beispiele:
Der Win98 Rechner ist aus, ich fahre nur Linux hoch.
linux:~ # ifconfig
eth1 Link
encap:Ethernet HWaddr
00:04:76:17:9C:B2
inet
addr:192.168.0.2 Bcast:192.168.0.255
Mask:255.255.255.0
UP
BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:49
errors:0 dropped:0 overruns:0
frame:0
TX packets:49
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:100
Interrupt:11 Base address:0xec00
lo Link encap:Local
Loopback
inet
addr:127.0.0.1
Mask:255.0.0.0
UP
LOOPBACK RUNNING MTU:3924
Metric:1
RX packets:25
errors:0 dropped:0 overruns:0
frame:0
TX packets:25
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:0
ppp0 Link encap:Point-to-Point
Protocol
inet
addr:217.0.241.21 P-t-P:62.225.246.209
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1452
Metric:1
RX packets:46
errors:0 dropped:0 overruns:0
frame:0
TX packets:46
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:10
linux:~ #
linux:~ # rcnetwork restart
ln: /sbin/init.d/rc2.d/S10adsl: File
exists
ln: /sbin/init.d/rc3.d/S10adsl: File exists
ln:
/sbin/init.d/rc2.d/K35adsl: File exists
ln: /sbin/init.d/rc3.d/K35adsl: File
exists
ln: /sbin/init.d/rc2.d/S10adsl: File exists
ln:
/sbin/init.d/rc3.d/S10adsl: File exists
ln: /sbin/init.d/rc2.d/K35adsl: File
exists
ln: /sbin/init.d/rc3.d/K35adsl: File exists
Shutting down network
device
eth1
done
Shutting down network device
eth0
done
ln: /sbin/init.d/rc2.d/S10adsl: File exists
ln:
/sbin/init.d/rc3.d/S10adsl: File exists
ln: /sbin/init.d/rc2.d/K35adsl: File
exists
ln: /sbin/init.d/rc3.d/K35adsl: File exists
Setting up network
device eth0
SIOCSIFFLAGS: No such device
SIOCSIFFLAGS: No such
device
failed
Setting up network device
eth1
done
linux:~ #
Der Win98 Rechner ist an, Linux wird gestartet.
linux:~ # ifconfig
eth0 Link
encap:Ethernet HWaddr
00:01:02:F9:E9:49
inet
addr:192.168.0.1 Bcast:192.168.0.255
Mask:255.255.255.0
UP
BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:1
errors:0 dropped:0 overruns:0
frame:0
TX packets:1
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:100
Interrupt:10 Base address:0xe800
eth1 Link encap:Ethernet HWaddr
00:04:76:17:9C:B2
inet
addr:192.168.0.2 Bcast:192.168.0.255
Mask:255.255.255.0
UP
BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:20
errors:0 dropped:0 overruns:0
frame:0
TX packets:20
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:100
Interrupt:11 Base address:0xec00
lo Link encap:Local
Loopback
inet
addr:127.0.0.1
Mask:255.0.0.0
UP
LOOPBACK RUNNING MTU:3924
Metric:1
RX packets:25
errors:0 dropped:0 overruns:0
frame:0
TX packets:25
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:0
ppp0 Link encap:Point-to-Point
Protocol
inet
addr:217.80.203.175 P-t-P:62.225.246.209
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1452
Metric:1
RX packets:17
errors:0 dropped:0 overruns:0
frame:0
TX packets:17
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:10
linux:~ #
linux:~ # rcnetwork restart
ln: /sbin/init.d/rc2.d/S10adsl: File
exists
ln: /sbin/init.d/rc3.d/S10adsl: File exists
ln:
/sbin/init.d/rc2.d/K35adsl: File exists
ln: /sbin/init.d/rc3.d/K35adsl: File
exists
ln: /sbin/init.d/rc2.d/S10adsl: File exists
ln:
/sbin/init.d/rc3.d/S10adsl: File exists
ln: /sbin/init.d/rc2.d/K35adsl: File
exists
ln: /sbin/init.d/rc3.d/K35adsl: File exists
Shutting down network
device
eth1
done
Shutting down network device
eth0
done
ln: /sbin/init.d/rc2.d/S10adsl: File exists
ln:
/sbin/init.d/rc3.d/S10adsl: File exists
ln: /sbin/init.d/rc2.d/K35adsl: File
exists
ln: /sbin/init.d/rc3.d/K35adsl: File exists
Setting up network
device
eth0
done
Setting up network device
eth1
done
linux:~ #
Beide Rechner sind an, Win98 wird neugestartet. Anschließend pinge
ich von Win98 auf Linux.
linux:~ # ifconfig
eth0 Link
encap:Ethernet HWaddr
00:01:02:F9:E9:49
inet
addr:192.168.0.1 Bcast:192.168.0.255
Mask:255.255.255.0
UP
BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:43
errors:0 dropped:0 overruns:0
frame:0
TX packets:38
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:100
Interrupt:10 Base address:0xe800
eth1 Link encap:Ethernet HWaddr
00:04:76:17:9C:B2
inet
addr:192.168.0.2 Bcast:192.168.0.255
Mask:255.255.255.0
UP
BROADCAST RUNNING MULTICAST MTU:1500
Metric:1
RX packets:41
errors:0 dropped:0 overruns:0
frame:0
TX packets:36
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:100
Interrupt:11 Base address:0xec00
lo Link encap:Local
Loopback
inet
addr:127.0.0.1
Mask:255.0.0.0
UP
LOOPBACK RUNNING MTU:3924
Metric:1
RX packets:79
errors:0 dropped:0 overruns:0
frame:0
TX packets:79
errors:0 dropped:0 overruns:0
carrier:0
collisions:0
txqueuelen:0
linux:~ #
linux:~ # rcnetwork restart
ln: /sbin/init.d/rc2.d/S10adsl: File
exists
ln: /sbin/init.d/rc3.d/S10adsl: File exists
ln:
/sbin/init.d/rc2.d/K35adsl: File exists
ln: /sbin/init.d/rc3.d/K35adsl: File
exists
ln: /sbin/init.d/rc2.d/S10adsl: File exists
ln:
/sbin/init.d/rc3.d/S10adsl: File exists
ln: /sbin/init.d/rc2.d/K35adsl: File
exists
ln: /sbin/init.d/rc3.d/K35adsl: File exists
Shutting down network
device
eth1
done
Shutting down network device
eth0
done
ln: /sbin/init.d/rc2.d/S10adsl: File exists
ln:
/sbin/init.d/rc3.d/S10adsl: File exists
ln: /sbin/init.d/rc2.d/K35adsl: File
exists
ln: /sbin/init.d/rc3.d/K35adsl: File exists
Setting up network
device
eth0
done
Setting up network device
eth1
done
linux:~ #
Gruß
Udo Lütkemeier