Hallo, ich möchte mein Posting noch um ein paar Angaben ergänzen. Und zwar handelt es sich hierbei um praktische Beispiele: Der Win98 Rechner ist aus, ich fahre nur Linux hoch. linux:~ # ifconfig eth1 Link encap:Ethernet HWaddr 00:04:76:17:9C:B2 inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49 errors:0 dropped:0 overruns:0 frame:0 TX packets:49 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:11 Base address:0xec00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:25 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ppp0 Link encap:Point-to-Point Protocol inet addr:217.0.241.21 P-t-P:62.225.246.209 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1452 Metric:1 RX packets:46 errors:0 dropped:0 overruns:0 frame:0 TX packets:46 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 linux:~ # linux:~ # rcnetwork restart ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists Shutting down network device eth1 done Shutting down network device eth0 done ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists Setting up network device eth0 SIOCSIFFLAGS: No such device SIOCSIFFLAGS: No such device failed Setting up network device eth1 done linux:~ # Der Win98 Rechner ist an, Linux wird gestartet. linux:~ # ifconfig eth0 Link encap:Ethernet HWaddr 00:01:02:F9:E9:49 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0xe800 eth1 Link encap:Ethernet HWaddr 00:04:76:17:9C:B2 inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:11 Base address:0xec00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:25 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 ppp0 Link encap:Point-to-Point Protocol inet addr:217.80.203.175 P-t-P:62.225.246.209 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1452 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 linux:~ # linux:~ # rcnetwork restart ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists Shutting down network device eth1 done Shutting down network device eth0 done ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists Setting up network device eth0 done Setting up network device eth1 done linux:~ # Beide Rechner sind an, Win98 wird neugestartet. Anschließend pinge ich von Win98 auf Linux. linux:~ # ifconfig eth0 Link encap:Ethernet HWaddr 00:01:02:F9:E9:49 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:38 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0xe800 eth1 Link encap:Ethernet HWaddr 00:04:76:17:9C:B2 inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:41 errors:0 dropped:0 overruns:0 frame:0 TX packets:36 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:11 Base address:0xec00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:79 errors:0 dropped:0 overruns:0 frame:0 TX packets:79 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 linux:~ # linux:~ # rcnetwork restart ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists Shutting down network device eth1 done Shutting down network device eth0 done ln: /sbin/init.d/rc2.d/S10adsl: File exists ln: /sbin/init.d/rc3.d/S10adsl: File exists ln: /sbin/init.d/rc2.d/K35adsl: File exists ln: /sbin/init.d/rc3.d/K35adsl: File exists Setting up network device eth0 done Setting up network device eth1 done linux:~ # Gruß Udo Lütkemeier