June 2013 - openSUSE Users (Deutsch) - openSUSE Mailing Lists

symlinks auf init-skript verschwunden
by Lentes, Bernd 17 Jun '13

17 Jun '13

Hi, auf einem Server wurden auf einmal beim Booten die Logical Volumes nicht mehr gemountet. Das lag daran, weil in /dev die entsprechenden device-Dateien gefehlt haben. Bei vorherigen Bootvorgängen war alles gut. Ursache war, daß die symlinks auf /etc/init.d/boot.lvm in /etc/init.d/boot.d gefehlt haben. Und zwar der zum Starten und der zum Stoppen. Das einzige was an der Maschine passiert ist, das sie wegen einer falsch konfigurierten USV letztes Wochenende hart aus ging. Kann das dazu führen, daß ausgerechnet diese beiden links verschwinden ? Mascine ist ein SLES 11 SP2 64bit. Bernd -- Bernd Lentes Systemadministration Institut für Entwicklungsgenetik Gebäude 35.34 - Raum 208 HelmholtzZentrum münchen bernd.lentes(a)helmholtz-muenchen.de phone: +49 89 3187 1241 fax: +49 89 3187 2294 http://www.helmholtz-muenchen.de/idg Wer nichts verdient außer Geld verdient nichts außer Geld Helmholtz Zentrum München Deutsches Forschungszentrum für Gesundheit und Umwelt (GmbH) Ingolstädter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir´in Bärbel Brumme-Bothe Geschäftsführer: Prof. Dr. Günther Wess Dr. Nikolaus Blum Dr. Alfons Enhsen Registergericht: Amtsgericht München HRB 6466 USt-IdNr: DE 129521671 -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

3 2

Re: SuSE 12.3 - Canoscan 9000f - wie installieren?
by JURKSCH＠elektron-bbs.de 17 Jun '13

17 Jun '13

> Ich habs ja kaum geglaubt als ich das gelesen habe ... Darauf muss man erst > einmal kommen. Danke für Info, dass es tatsächlich daran lag. Den Dank bin ich schuldig. Manchmal kommt man wirklich aus dem Staunen nicht heraus. MfG Hermann -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

1 0

Re: Labtop mit "intel"- Graphic und openSUSE 12.3 funktioniert nicht
by Malte Gell 16 Jun '13

16 Jun '13

Am 16.06.2013 22:23, schrieb Jan Ritzerfeld: > Am Sonntag, 16. Juni 2013, 21:42:56 schrieb Malte Gell: >> (...). >> Wenn man sich aber eine xorg.conf bastelt, kann man bequem auf KMS >> verzichten. > > Hmm. Dann muss man aber den richtigen Treiber auswählen, also einen der noch > ohne KMS kann, oder? > >> Wenn man den nVidia Treiber von nVidia benutzen will, muss >> man sogar auf KMS verzichten. Wollt ich nur mal so einwerfen... > > Ui, ich dachte das kann der mittlerweile (ich nutze seit Jahren kein NVidia > mehr). Wenn du openSUSE frisch aufsetzt auf einem nVidia System wird automatisch der nouveau Treiber installiert. Den muss man aber abschalten, wenn man den proprietären nVidia Treiber benutzen will. Und um nouveau abzuschalten, muss man erstmal KMS abschalten, damit nouveau nicht mehr geladen wird. Man kann es sich auch einfach machen, und die proprietären Treiber aus dem AMD / nVidia Community Repo nehmen, dann wird alles automatisch eingerichtet. Ich bau mir den Treiber immer selbst. Gruß Malte -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

1 0

Re: Labtop mit "intel"- Graphic und openSUSE 12.3 funktioniert nicht
by Malte Gell 16 Jun '13

16 Jun '13

Am 16.06.2013 21:38, schrieb Jan Ritzerfeld: > Am Sonntag, 16. Juni 2013, 20:27:34 schrieb Sebastian Reinhardt: >> Hallo, >> Ich habe hier einen Maxdata NBPRO 5500IR (baugleich GETAC P470) mit >> einem Intel 945- Chipsatz. Mit openSUSE 12.1 habe ich mich um die >> Grafikeinstellungen nicht kümmern müssen, da wurde alles automatisch >> erkannt und gut. Nachdem ich nun openSUSE 12.3 installiert habe, > > Neu installiert oder das bestehende System aktualisiert? > >> wird >> nur noch der Boot-Splash angezeigt und sobald KDE geladen werden soll, >> kommt nur noch der Textmodus. >> (...). >> [ 7.480] (EE) modesetting(0): KMS setup failed > > Das riecht nach einem Boot mit der Option "nomodeset" aus. Ja, weiter oben > stehts ja: >> [ 7.361] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-3.9.4-1.g51bf0ff-desktop > root=UUID=19bd23b7-5e3f-4972-81bd-f5dcbe81a6c5 nomodeset Wenn man sich aber eine xorg.conf bastelt, kann man bequem auf KMS verzichten. Wenn man den nVidia Treiber von nVidia benutzen will, muss man sogar auf KMS verzichten. Wollt ich nur mal so einwerfen... Gruß Malte -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

2 1

Re: [gelöst] Labtop mit "intel"- Graphic und openSUSE 12.3 funktioniert nicht
by Sebastian Reinhardt 16 Jun '13

16 Jun '13

Am 16.06.2013 21:38, schrieb Jan Ritzerfeld: > Am Sonntag, 16. Juni 2013, 20:27:34 schrieb Sebastian Reinhardt: >> Hallo, >> Ich habe hier einen Maxdata NBPRO 5500IR (baugleich GETAC P470) mit >> einem Intel 945- Chipsatz. Mit openSUSE 12.1 habe ich mich um die >> Grafikeinstellungen nicht kümmern müssen, da wurde alles automatisch >> erkannt und gut. Nachdem ich nun openSUSE 12.3 installiert habe, > Neu installiert oder das bestehende System aktualisiert? > >> wird >> nur noch der Boot-Splash angezeigt und sobald KDE geladen werden soll, >> kommt nur noch der Textmodus. >> (...). >> [ 7.480] (EE) modesetting(0): KMS setup failed > Das riecht nach einem Boot mit der Option "nomodeset" aus. Ja, weiter oben > stehts ja: >> [ 7.361] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-3.9.4-1.g51bf0ff-desktop > root=UUID=19bd23b7-5e3f-4972-81bd-f5dcbe81a6c5 nomodeset > resume=/dev/disk/by-id/ata-ST750LX003-1AC154_W200MEQP-part7 splash=silent > quiet showopts > > Wieso benutzt du das? Der intel-X.org-Treiber kann IIRC nur mit KMS, also > ohne "nomodeset" : > https://www.suse.com/releasenotes/i386/openSUSE/12.3/RELEASE-NOTES.en.html#… > > Gruß > Jan Äh, ups. Da war ich wohl "betriebsblind". Das "nomodeset" habe ich aber nicht von Hand da eingefügt! Wie auch immer das da reingekommen ist, jetzt geht es wieder. Danke! -- Mit freundlichen Grüßen Sebastian Reinhardt -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

1 0

Labtop mit "intel"- Graphic und openSUSE 12.3 funktioniert nicht
by Sebastian Reinhardt 16 Jun '13

16 Jun '13

Hallo, Ich habe hier einen Maxdata NBPRO 5500IR (baugleich GETAC P470) mit einem Intel 945- Chipsatz. Mit openSUSE 12.1 habe ich mich um die Grafikeinstellungen nicht kümmern müssen, da wurde alles automatisch erkannt und gut. Nachdem ich nun openSUSE 12.3 installiert habe, wird nur noch der Boot-Splash angezeigt und sobald KDE geladen werden soll, kommt nur noch der Textmodus. Ausgabe von Xorg.0.log: -------------------------------------------------------- [ 7.361] X.Org X Server 1.14.1 Release Date: 2013-04-17 [ 7.361] X Protocol Version 11, Revision 0 [ 7.361] Build Operating System: openSUSE SUSE LINUX [ 7.361] Current Operating System: Linux dorsy1.SNR 3.9.4-1.g51bf0ff-desktop #1 SMP PREEMPT Fri May 24 19:52:42 UTC 2013 (51bf0ff) x86_64 [ 7.361] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.4-1.g51bf0ff-desktop root=UUID=19bd23b7-5e3f-4972-81bd-f5dcbe81a6c5 nomodeset resume=/dev/disk/by-id/ata-ST750LX003-1AC154_W200MEQP-part7 splash=silent quiet showopts [ 7.361] Build Date: 07 June 2013 07:55:37AM [ 7.361] [ 7.361] Current version of pixman: 0.30.0 [ 7.361] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7.361] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7.361] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 16 20:17:29 2013 [ 7.362] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 7.362] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 7.362] (==) No Layout section. Using the first Screen section. [ 7.362] (==) No screen section available. Using defaults. [ 7.362] (**) |-->Screen "Default Screen Section" (0) [ 7.362] (**) | |-->Monitor "<default monitor>" [ 7.362] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 7.362] (==) Automatically adding devices [ 7.362] (==) Automatically enabling devices [ 7.362] (==) Automatically adding GPU devices [ 7.386] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist. [ 7.386] Entry deleted from font path. [ 7.386] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/ghostscript/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 7.386] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules" [ 7.386] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 7.386] (II) Loader magic: 0x802c20 [ 7.386] (II) Module ABI versions: [ 7.386] X.Org ANSI C Emulation: 0.4 [ 7.386] X.Org Video Driver: 14.1 [ 7.386] X.Org XInput driver : 19.1 [ 7.386] X.Org Server Extension : 7.0 [ 7.386] (II) config/udev: Adding drm device (/dev/dri/card0) [ 7.389] (--) PCI:*(0:0:2:0) 8086:27a2:1071:4700 rev 3, Mem @ 0xf8300000/524288, 0xd0000000/268435456, 0xf8400000/262144, I/O @ 0x00001800/8 [ 7.389] (--) PCI: (0:0:2:1) 8086:27a6:1071:4700 rev 3, Mem @ 0xf8380000/524288 [ 7.389] Initializing built-in extension Generic Event Extension [ 7.389] Initializing built-in extension SHAPE [ 7.389] Initializing built-in extension MIT-SHM [ 7.389] Initializing built-in extension XInputExtension [ 7.389] Initializing built-in extension XTEST [ 7.389] Initializing built-in extension BIG-REQUESTS [ 7.389] Initializing built-in extension SYNC [ 7.389] Initializing built-in extension XKEYBOARD [ 7.389] Initializing built-in extension XC-MISC [ 7.389] Initializing built-in extension SECURITY [ 7.389] Initializing built-in extension XINERAMA [ 7.389] Initializing built-in extension XFIXES [ 7.389] Initializing built-in extension RENDER [ 7.389] Initializing built-in extension RANDR [ 7.389] Initializing built-in extension COMPOSITE [ 7.389] Initializing built-in extension DAMAGE [ 7.389] Initializing built-in extension MIT-SCREEN-SAVER [ 7.389] Initializing built-in extension DOUBLE-BUFFER [ 7.389] Initializing built-in extension RECORD [ 7.389] Initializing built-in extension DPMS [ 7.389] Initializing built-in extension X-Resource [ 7.389] Initializing built-in extension XVideo [ 7.389] Initializing built-in extension XVideo-MotionCompensation [ 7.389] Initializing built-in extension XFree86-VidModeExtension [ 7.389] Initializing built-in extension XFree86-DGA [ 7.389] Initializing built-in extension XFree86-DRI [ 7.389] Initializing built-in extension DRI2 [ 7.389] (II) "glx" will be loaded by default. [ 7.389] (II) LoadModule: "dri2" [ 7.389] (II) Module "dri2" already built-in [ 7.389] (II) LoadModule: "glamoregl" [ 7.398] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so [ 7.400] (II) Module glamoregl: vendor="X.Org Foundation" [ 7.400] compiled for 1.14.1, module version = 0.5.0 [ 7.400] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7.400] (II) LoadModule: "glx" [ 7.400] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 7.401] (II) Module glx: vendor="X.Org Foundation" [ 7.401] compiled for 1.14.1, module version = 1.0.0 [ 7.401] ABI class: X.Org Server Extension, version 7.0 [ 7.401] (==) AIGLX enabled [ 7.401] Loading extension GLX [ 7.401] (==) Matched intel as autoconfigured driver 0 [ 7.401] (==) Matched intel as autoconfigured driver 1 [ 7.401] (==) Matched modesetting as autoconfigured driver 2 [ 7.401] (==) Matched fbdev as autoconfigured driver 3 [ 7.401] (==) Matched vesa as autoconfigured driver 4 [ 7.401] (==) Assigned the driver to the xf86ConfigLayout [ 7.401] (II) LoadModule: "intel" [ 7.407] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so [ 7.407] (II) Module intel: vendor="X.Org Foundation" [ 7.407] compiled for 1.14.1, module version = 2.21.9 [ 7.407] Module class: X.Org Video Driver [ 7.407] ABI class: X.Org Video Driver, version 14.1 [ 7.407] (II) LoadModule: "modesetting" [ 7.408] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so [ 7.409] (II) Module modesetting: vendor="X.Org Foundation" [ 7.409] compiled for 1.14.1, module version = 0.7.0 [ 7.409] Module class: X.Org Video Driver [ 7.409] ABI class: X.Org Video Driver, version 14.1 [ 7.409] (II) LoadModule: "fbdev" [ 7.409] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 7.410] (II) Module fbdev: vendor="X.Org Foundation" [ 7.410] compiled for 1.14.1, module version = 0.4.3 [ 7.410] Module class: X.Org Video Driver [ 7.410] ABI class: X.Org Video Driver, version 14.1 [ 7.410] (II) LoadModule: "vesa" [ 7.410] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so [ 7.411] (II) Module vesa: vendor="X.Org Foundation" [ 7.411] compiled for 1.14.1, module version = 2.3.2 [ 7.411] Module class: X.Org Video Driver [ 7.411] ABI class: X.Org Video Driver, version 14.1 [ 7.411] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), HD Graphics, HD Graphics 4600, Haswell Desktop (GT3), HD Graphics, HD Graphics 4600, Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700, Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3), HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT3), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT3), Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3), Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400, HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2), Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2), Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200, Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600, Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1), HD Graphics 4600, Iris(TM) Pro Graphics 5200, Haswell CRW Server (GT1), Haswell CRW Server (GT2), Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2), Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2), Iris(TM) Pro Graphics 5200, ValleyView PO board [ 7.412] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 7.412] (II) FBDEV: driver for framebuffer: fbdev [ 7.412] (II) VESA: driver for VESA chipsets: vesa [ 7.412] (++) using VT number 7 [ 7.474] (II) modesetting(0): using drv /dev/dri/card0 [ 7.474] (WW) Falling back to old probe method for fbdev [ 7.474] (II) Loading sub module "fbdevhw" [ 7.474] (II) LoadModule: "fbdevhw" [ 7.478] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 7.479] (II) Module fbdevhw: vendor="X.Org Foundation" [ 7.480] compiled for 1.14.1, module version = 0.0.2 [ 7.480] ABI class: X.Org Video Driver, version 14.1 [ 7.480] (WW) Falling back to old probe method for vesa [ 7.480] (II) modesetting(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 7.480] (==) modesetting(0): Depth 24, (--) framebuffer bpp 32 [ 7.480] (==) modesetting(0): RGB weight 888 [ 7.480] (==) modesetting(0): Default visual is TrueColor [ 7.480] (II) modesetting(0): ShadowFB: preferred NO, enabled NO [ 7.480] (EE) modesetting(0): KMS setup failed [ 7.480] (II) UnloadModule: "modesetting" [ 7.480] (EE) Screen(s) found, but none have a usable configuration. [ 7.480] Fatal server error: [ 7.480] no screens found [ 7.480] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 7.480] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 7.480] (EE) [ 7.554] Server terminated with error (1). Closing log file. -------------------------------------------------------- Dann habe ich mit "sax3" eine feste Konfig erstellt, aber dort kommt nur, dass das Device nicht gefunden wird- Ich habe auch schon andere Kernel ausprobiert, aber ohne Änderung. Aktuell: uname- a:Linux dorsy1.SNR 3.9.4-1.g51bf0ff-desktop #1 SMP PREEMPT Fri May 24 19:52:42 UTC 2013 (51bf0ff) x86_64 x86_64 x86_64 GNU/Linux X11 aus: X11:Xorg- repo Ich habe auch noch ein baugleiches Notebook mit openSUSE 12.1 und funktionierendem X11/KDE4. Da sieht die Xorg.0.log so aus: ------------------------------------------------------------------------------------- [ 72.612] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 72.612] X Protocol Version 11, Revision 0 [ 72.612] Build Operating System: openSUSE SUSE LINUX [ 72.612] Current Operating System: Linux lmvnb4.lmv 3.1.0-1.2-desktop #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0) i686 [ 72.612] Kernel command line: root=/dev/disk/by-id/ata-SAMSUNG_HM400JI_S1X0JDRSB00710-part2 resume=/dev/disk/by-id/ata-SAMSUNG_HM400JI_S1X0JDRSB00710-part1 splash=silent quiet vga=0x317 [ 72.612] Build Date: 10 November 2011 03:34:02PM [ 72.612] [ 72.612] Current version of pixman: 0.22.0 [ 72.612] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 72.612] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 72.612] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 16 20:35:55 2013 [ 72.620] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 72.620] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 72.621] (==) No Layout section. Using the first Screen section. [ 72.621] (==) No screen section available. Using defaults. [ 72.621] (**) |-->Screen "Default Screen Section" (0) [ 72.621] (**) | |-->Monitor "<default monitor>" [ 72.621] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 72.621] (==) Automatically adding devices [ 72.621] (==) Automatically enabling devices [ 72.621] (==) FontPath set to: /usr/share/fonts/misc:unscaled, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi:unscaled, /usr/share/fonts/75dpi:unscaled, /usr/share/fonts/URW/, /usr/share/fonts/cyrillic:unscaled, /usr/share/fonts/truetype/, built-ins [ 72.621] (==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules" [ 72.621] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 72.621] (II) Loader magic: 0x8233d40 [ 72.621] (II) Module ABI versions: [ 72.621] X.Org ANSI C Emulation: 0.4 [ 72.621] X.Org Video Driver: 10.0 [ 72.621] X.Org XInput driver : 12.2 [ 72.621] X.Org Server Extension : 5.0 [ 72.635] (--) PCI:*(0:0:2:0) 8086:27a2:1071:4700 rev 3, Mem @ 0xf8200000/524288, 0xd0000000/268435456, 0xf8300000/262144, I/O @ 0x00001800/8 [ 72.635] (--) PCI: (0:0:2:1) 8086:27a6:1071:4700 rev 3, Mem @ 0xf8280000/524288 [ 72.635] (II) Open ACPI successful (/var/run/acpid.socket) [ 72.635] (II) LoadModule: "extmod" [ 72.651] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 72.651] (II) Module extmod: vendor="X.Org Foundation" [ 72.651] compiled for 1.10.4, module version = 1.0.0 [ 72.651] Module class: X.Org Server Extension [ 72.651] ABI class: X.Org Server Extension, version 5.0 [ 72.651] (II) Loading extension MIT-SCREEN-SAVER [ 72.651] (II) Loading extension XFree86-VidModeExtension [ 72.651] (II) Loading extension XFree86-DGA [ 72.651] (II) Loading extension DPMS [ 72.651] (II) Loading extension XVideo [ 72.651] (II) Loading extension XVideo-MotionCompensation [ 72.651] (II) Loading extension X-Resource [ 72.651] (II) LoadModule: "dbe" [ 72.652] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 72.652] (II) Module dbe: vendor="X.Org Foundation" [ 72.652] compiled for 1.10.4, module version = 1.0.0 [ 72.652] Module class: X.Org Server Extension [ 72.652] ABI class: X.Org Server Extension, version 5.0 [ 72.653] (II) Loading extension DOUBLE-BUFFER [ 72.653] (II) LoadModule: "glx" [ 72.653] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 72.654] (II) Module glx: vendor="X.Org Foundation" [ 72.654] compiled for 1.10.4, module version = 1.0.0 [ 72.654] ABI class: X.Org Server Extension, version 5.0 [ 72.654] (==) AIGLX enabled [ 72.654] (II) Loading extension GLX [ 72.654] (II) LoadModule: "record" [ 72.655] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 72.655] (II) Module record: vendor="X.Org Foundation" [ 72.655] compiled for 1.10.4, module version = 1.13.0 [ 72.655] Module class: X.Org Server Extension [ 72.655] ABI class: X.Org Server Extension, version 5.0 [ 72.655] (II) Loading extension RECORD [ 72.655] (II) LoadModule: "dri" [ 72.656] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 72.656] (II) Module dri: vendor="X.Org Foundation" [ 72.656] compiled for 1.10.4, module version = 1.0.0 [ 72.656] ABI class: X.Org Server Extension, version 5.0 [ 72.656] (II) Loading extension XFree86-DRI [ 72.656] (II) LoadModule: "dri2" [ 72.657] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 72.657] (II) Module dri2: vendor="X.Org Foundation" [ 72.657] compiled for 1.10.4, module version = 1.2.0 [ 72.657] ABI class: X.Org Server Extension, version 5.0 [ 72.657] (II) Loading extension DRI2 [ 72.657] (==) Matched intel as autoconfigured driver 0 [ 72.657] (==) Matched fbdev as autoconfigured driver 1 [ 72.657] (==) Matched vesa as autoconfigured driver 2 [ 72.657] (==) Assigned the driver to the xf86ConfigLayout [ 72.657] (II) LoadModule: "intel" [ 72.658] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 72.658] (II) Module intel: vendor="X.Org Foundation" [ 72.658] compiled for 1.10.4, module version = 2.16.0 [ 72.658] Module class: X.Org Video Driver [ 72.658] ABI class: X.Org Video Driver, version 10.0 [ 72.658] (II) LoadModule: "fbdev" [ 72.659] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 72.659] (II) Module fbdev: vendor="X.Org Foundation" [ 72.659] compiled for 1.10.4, module version = 0.4.2 [ 72.659] ABI class: X.Org Video Driver, version 10.0 [ 72.659] (II) LoadModule: "vesa" [ 72.667] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 72.667] (II) Module vesa: vendor="X.Org Foundation" [ 72.667] compiled for 1.10.4, module version = 2.3.0 [ 72.667] Module class: X.Org Video Driver [ 72.667] ABI class: X.Org Video Driver, version 10.0 [ 72.667] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 72.667] (II) FBDEV: driver for framebuffer: fbdev [ 72.667] (II) VESA: driver for VESA chipsets: vesa [ 72.668] (++) using VT number 7 [ 72.679] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 72.679] (WW) Falling back to old probe method for fbdev [ 72.679] (II) Loading sub module "fbdevhw" [ 72.679] (II) LoadModule: "fbdevhw" [ 72.680] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 72.680] (II) Module fbdevhw: vendor="X.Org Foundation" [ 72.680] compiled for 1.10.4, module version = 0.0.2 [ 72.680] ABI class: X.Org Video Driver, version 10.0 [ 72.680] (WW) Falling back to old probe method for vesa [ 72.680] drmOpenDevice: node name is /dev/dri/card0 [ 72.680] drmOpenDevice: open result is 9, (OK) [ 72.681] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 72.681] drmOpenDevice: node name is /dev/dri/card0 [ 72.681] drmOpenDevice: open result is 9, (OK) [ 72.681] drmOpenByBusid: drmOpenMinor returns 9 [ 72.681] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 72.681] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 72.681] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 72.681] (==) intel(0): RGB weight 888 [ 72.681] (==) intel(0): Default visual is TrueColor [ 72.681] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM [ 72.681] (--) intel(0): Chipset: "945GM" [ 72.681] (**) intel(0): Relaxed fencing disabled [ 72.681] (**) intel(0): Wait on SwapBuffers? enabled [ 72.681] (**) intel(0): Triple buffering? enabled [ 72.681] (**) intel(0): Framebuffer tiled [ 72.681] (**) intel(0): Pixmaps tiled [ 72.681] (**) intel(0): 3D buffers tiled [ 72.681] (**) intel(0): SwapBuffers wait enabled [ 72.681] (==) intel(0): video overlay key set to 0x101fe [ 72.681] (II) intel(0): Output LVDS1 has no monitor section [ 72.686] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 72.709] (II) intel(0): Output VGA1 has no monitor section [ 72.709] (II) intel(0): EDID for output LVDS1 [ 72.709] (II) intel(0): Manufacturer: CMO Model: 1424 Serial#: 0 [ 72.709] (II) intel(0): Year: 2007 Week: 14 [ 72.709] (II) intel(0): EDID Version: 1.3 [ 72.709] (II) intel(0): Digital Display Input [ 72.709] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 19 [ 72.709] (II) intel(0): Gamma: 2.20 [ 72.709] (II) intel(0): No DPMS capabilities specified [ 72.709] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 72.709] (II) intel(0): First detailed timing is preferred mode [ 72.709] (II) intel(0): redX: 0.588 redY: 0.337 greenX: 0.315 greenY: 0.534 [ 72.709] (II) intel(0): blueX: 0.152 blueY: 0.125 whiteX: 0.313 whiteY: 0.329 [ 72.709] (II) intel(0): Manufacturer's mask: 0 [ 72.709] (II) intel(0): Supported detailed timing: [ 72.709] (II) intel(0): clock: 69.3 MHz Image Size: 303 x 190 mm [ 72.709] (II) intel(0): h_active: 1280 h_sync: 1319 h_sync_end 1345 h_blank_end 1410 h_border: 0 [ 72.709] (II) intel(0): v_active: 800 v_sync: 802 v_sync_end 806 v_blanking: 819 v_border: 0 [ 72.709] (II) intel(0): N141I3-L01 [ 72.709] (II) intel(0): CMO [ 72.709] (II) intel(0): N141I3-L01 [ 72.709] (II) intel(0): EDID (in hex): [ 72.709] (II) intel(0): 00ffffffffffff000daf241400000000 [ 72.709] (II) intel(0): 0e110103801e13780a9f059656508827 [ 72.709] (II) intel(0): 20505400000001010101010101010101 [ 72.709] (II) intel(0): 010101010101111b008250201330271a [ 72.709] (II) intel(0): 24002fbe10000018000000fe004e3134 [ 72.709] (II) intel(0): 3149332d4c30310a2020000000fe0043 [ 72.709] (II) intel(0): 4d4f0a202020202020202020000000fe [ 72.709] (II) intel(0): 004e31343149332d4c30310a20200073 [ 72.709] (II) intel(0): EDID vendor "CMO", prod id 5156 [ 72.709] (II) intel(0): Printing DDC gathered Modelines: [ 72.709] (II) intel(0): Modeline "1280x800"x0.0 69.29 1280 1319 1345 1410 800 802 806 819 -hsync -vsync (49.1 kHz) [ 72.709] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 72.709] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 72.709] (II) intel(0): Printing probed modes for output LVDS1 [ 72.709] (II) intel(0): Modeline "1280x800"x60.0 69.29 1280 1319 1345 1410 800 802 806 819 -hsync -vsync (49.1 kHz) [ 72.709] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 72.709] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 72.710] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 72.710] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 72.733] (II) intel(0): EDID for output VGA1 [ 72.733] (II) intel(0): Output LVDS1 connected [ 72.733] (II) intel(0): Output VGA1 disconnected [ 72.733] (II) intel(0): Using exact sizes for initial modes [ 72.733] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 72.733] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 72.733] (II) intel(0): Kernel page flipping support detected, enabling [ 72.733] (**) intel(0): Display dimensions: (300, 190) mm [ 72.733] (**) intel(0): DPI set to (108, 106) [ 72.733] (II) Loading sub module "fb" [ 72.733] (II) LoadModule: "fb" [ 72.734] (II) Loading /usr/lib/xorg/modules/libfb.so [ 72.734] (II) Module fb: vendor="X.Org Foundation" [ 72.734] compiled for 1.10.4, module version = 1.0.0 [ 72.734] ABI class: X.Org ANSI C Emulation, version 0.4 [ 72.734] (II) Loading sub module "dri2" [ 72.734] (II) LoadModule: "dri2" [ 72.735] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 72.735] (II) Module dri2: vendor="X.Org Foundation" [ 72.735] compiled for 1.10.4, module version = 1.2.0 [ 72.735] ABI class: X.Org Server Extension, version 5.0 [ 72.735] (II) UnloadModule: "fbdev" [ 72.735] (II) Unloading fbdev [ 72.735] (II) UnloadModule: "fbdevhw" [ 72.735] (II) Unloading fbdevhw [ 72.735] (II) UnloadModule: "vesa" [ 72.735] (II) Unloading vesa [ 72.735] (==) Depth 24 pixmap format is 32 bpp [ 72.736] (II) intel(0): [DRI2] Setup complete [ 72.736] (II) intel(0): [DRI2] DRI driver: i915 [ 72.736] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled [ 72.736] (II) UXA(0): Driver registered support for the following operations: [ 72.736] (II) solid [ 72.736] (II) copy [ 72.736] (II) composite (RENDER acceleration) [ 72.736] (II) put_image [ 72.736] (II) get_image [ 72.736] (==) intel(0): Backing store disabled [ 72.736] (==) intel(0): Silken mouse enabled [ 72.736] (II) intel(0): Initializing HW Cursor [ 72.763] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 72.767] (==) intel(0): DPMS enabled [ 72.767] (==) intel(0): Intel XvMC decoder disabled [ 72.767] (II) intel(0): Set up textured video [ 72.767] (II) intel(0): Set up overlay video [ 72.767] (II) intel(0): direct rendering: DRI2 Enabled [ 72.767] (==) intel(0): hotplug detection: "enabled" [ 72.767] (--) RandR disabled [ 72.767] (II) Initializing built-in extension Generic Event Extension [ 72.767] (II) Initializing built-in extension SHAPE [ 72.767] (II) Initializing built-in extension MIT-SHM [ 72.767] (II) Initializing built-in extension XInputExtension [ 72.767] (II) Initializing built-in extension XTEST [ 72.767] (II) Initializing built-in extension BIG-REQUESTS [ 72.767] (II) Initializing built-in extension SYNC [ 72.767] (II) Initializing built-in extension XKEYBOARD [ 72.767] (II) Initializing built-in extension XC-MISC [ 72.767] (II) Initializing built-in extension SECURITY [ 72.767] (II) Initializing built-in extension XINERAMA [ 72.767] (II) Initializing built-in extension XFIXES [ 72.767] (II) Initializing built-in extension RENDER [ 72.768] (II) Initializing built-in extension RANDR [ 72.768] (II) Initializing built-in extension COMPOSITE [ 72.768] (II) Initializing built-in extension DAMAGE [ 72.788] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 72.788] (II) AIGLX: enabled GLX_INTEL_swap_event [ 72.788] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 72.788] (II) AIGLX: enabled GLX_SGI_make_current_read [ 72.788] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 72.788] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so [ 72.788] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 72.789] (II) intel(0): Setting screen physical size to 338 x 211 [ 72.865] (II) config/udev: Adding input device Power Button (/dev/input/event5) [ 72.865] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 72.865] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 72.865] (**) Power Button: Applying InputClass "LocalKeyboard" [ 72.865] (II) LoadModule: "evdev" [ 72.866] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 72.866] (II) Module evdev: vendor="X.Org Foundation" [ 72.866] compiled for 1.10.4, module version = 2.6.0 [ 72.866] Module class: X.Org XInput Driver [ 72.866] ABI class: X.Org XInput driver, version 12.2 [ 72.866] (II) Using input driver 'evdev' for 'Power Button' [ 72.866] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 72.866] (**) Power Button: always reports core events [ 72.866] (**) Power Button: Device: "/dev/input/event5" [ 72.866] (--) Power Button: Found keys [ 72.866] (II) Power Button: Configuring as keyboard [ 72.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5" [ 72.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 72.866] (**) Option "xkb_rules" "evdev" [ 72.866] (**) Option "xkb_model" "evdev" [ 72.866] (**) Option "xkb_layout" "de" [ 72.866] (**) Option "xkb_variant" "nodeadkeys" [ 73.023] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 73.023] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 73.023] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 73.023] (**) Video Bus: Applying InputClass "LocalKeyboard" [ 73.023] (II) Using input driver 'evdev' for 'Video Bus' [ 73.023] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 73.023] (**) Video Bus: always reports core events [ 73.023] (**) Video Bus: Device: "/dev/input/event2" [ 73.023] (--) Video Bus: Found keys [ 73.023] (II) Video Bus: Configuring as keyboard [ 73.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input2/event2" [ 73.023] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 73.023] (**) Option "xkb_rules" "evdev" [ 73.023] (**) Option "xkb_model" "evdev" [ 73.023] (**) Option "xkb_layout" "de" [ 73.023] (**) Option "xkb_variant" "nodeadkeys" [ 73.031] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 73.031] (II) No input driver/identifier specified (ignoring) [ 73.032] (II) config/udev: Adding input device Sleep Button (/dev/input/event4) [ 73.032] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 73.032] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 73.032] (**) Sleep Button: Applying InputClass "LocalKeyboard" [ 73.032] (II) Using input driver 'evdev' for 'Sleep Button' [ 73.032] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 73.032] (**) Sleep Button: always reports core events [ 73.032] (**) Sleep Button: Device: "/dev/input/event4" [ 73.032] (--) Sleep Button: Found keys [ 73.032] (II) Sleep Button: Configuring as keyboard [ 73.032] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4" [ 73.032] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) [ 73.032] (**) Option "xkb_rules" "evdev" [ 73.032] (**) Option "xkb_model" "evdev" [ 73.032] (**) Option "xkb_layout" "de" [ 73.032] (**) Option "xkb_variant" "nodeadkeys" [ 73.034] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event7) [ 73.034] (II) No input driver/identifier specified (ignoring) [ 73.042] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 73.042] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 73.042] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 73.042] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard" [ 73.042] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 73.042] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 73.042] (**) AT Translated Set 2 keyboard: always reports core events [ 73.042] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 73.042] (--) AT Translated Set 2 keyboard: Found keys [ 73.042] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 73.042] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 73.042] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 73.042] (**) Option "xkb_rules" "evdev" [ 73.042] (**) Option "xkb_model" "evdev" [ 73.042] (**) Option "xkb_layout" "de" [ 73.042] (**) Option "xkb_variant" "nodeadkeys" [ 73.043] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 73.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 73.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 73.043] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 73.043] (II) LoadModule: "synaptics" [ 73.044] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 73.044] (II) Module synaptics: vendor="X.Org Foundation" [ 73.044] compiled for 1.10.4, module version = 1.5.0 [ 73.044] Module class: X.Org XInput Driver [ 73.044] ABI class: X.Org XInput driver, version 12.2 [ 73.044] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 73.044] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 73.044] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 73.044] (**) Option "Device" "/dev/input/event1" [ 73.117] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 73.117] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 73.117] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 73.117] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0 [ 73.117] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 73.117] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 73.117] (**) Option "HorizScrollDelta" "0" [ 73.149] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 73.149] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 73.181] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input1/event1" [ 73.181] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 73.181] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 73.181] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75 [ 73.181] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040 [ 73.182] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 73.182] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 73.182] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 73.182] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 73.182] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 73.183] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 73.183] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 73.183] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 73.183] (II) No input driver/identifier specified (ignoring) [ 92.274] (II) intel(0): EDID vendor "CMO", prod id 5156 [ 92.274] (II) intel(0): Printing DDC gathered Modelines: [ 92.274] (II) intel(0): Modeline "1280x800"x0.0 69.29 1280 1319 1345 1410 800 802 806 819 -hsync -vsync (49.1 kHz) [ 107.256] (II) intel(0): EDID vendor "CMO", prod id 5156 [ 107.256] (II) intel(0): Printing DDC gathered Modelines: [ 107.256] (II) intel(0): Modeline "1280x800"x0.0 69.29 1280 1319 1345 1410 800 802 806 819 -hsync -vsync (49.1 kHz) ------------------------------------------------------------------------------------- Was kann/ soll ich tun, um das zum Laufen zu bekommen. -- Mit freundlichen Grüßen Sebastian Reinhardt -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

1 0

Wenn automatisches Ausblenden der Kontrollleiste eingestellt ist ...
by Matthias Müller 16 Jun '13

16 Jun '13

Hallo an alle, ich habe folgendes Problem: System openSUSE 12.3 mit KDE 4.10 (also Standard) Maschine ist virtuell in VirtualBox Auf der realen Desktop-Maschine läuft ein Debian Squeeze. Wenn automatisches Ausblenden der Kontrollleiste eingestellt ist, lässt sich die Kontrollleiste nicht mehr nach oben ziehen, geschweige denn wird sie automatisch wieder angezeigt, wenn ich den unteren Rand mit dem Mauszeiger berühre. Wenn ich den Ordner ~/.kde4 lösche ist alles wieder OK, aber alle Einstellungen für andere Programme sind weg. An welcher Stelle muss ich den eingreifen, wenn ich die Einstellungen der Kontrollleiste (und nur die) zurück setzen will. Kennt jemand dieses Verhalten oder hat eine Erklärung? Auf meinem Laptop läuft übrigens ebenfalls ein openSUSE 12.3, dort lässt sich dieses Verhalten nicht beobachten. -- Mit freundlichen Grüßen Matthias Müller (Benutzer #439779 im Linux-Counter http://counter.li.org) PS: Bitte senden Sie als Antwort auf meine E-Mails reine Text-Nachrichten!

1 0

Keyboard English 12.3?
by Günther J. Niederwimmer 16 Jun '13

16 Jun '13

hallo, ist es Euch auch schon passiert das nach einer NEU Installation das Keyboard English ist, das System sich aber weigert das umzustellen ? Ich kann es mit YaST2 Umstellen wenn das System gebootet ist, es funktioniert auch solange man keinen Neustart macht, beim erneuten Star hat man aber wieder eine Englische Tastatur. Wo kann man da noch drehen ? -- mit freundlichen Grüßen / best Regards, Günther J. Niederwimmer -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

1 0

Backup mit rsync
by Malte Gell 16 Jun '13

16 Jun '13

Hallo, ich hab bisher immer ein tar Konstrukt fürs Backup benutzt, will aber auf rsync umsteigen, weil das intelligenter und resourcensparender ist. rsync soll die Daten auf eine lokale USB Platte kopieren, ich dachte bisher an folgenden Aufruf: rsync -a -r -l -p -t -g -o -v --delete /home/malte_gell /mnt/backup/ Es sollen alle Dateiattribute erhalten bleiben. Ich verstehe bei der Angabe des Quellpfades den Unterschied nicht, wenn man den Schrägstrich setzt oder weglässt. Was ist also der Unterschied zwischen rsync /daten /mnt/backup/ und rsync /daten/ /mnt/backup/ ? Gruß Malte -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

7 9

Re: SuSE 12.3 - Canoscan 9000f - wie installieren?
by JURKSCH＠elektron-bbs.de 15 Jun '13

15 Jun '13

> Am Samstag, 15. Juni 2013, 01:06:00 schrieb Hermann Jurksch: >> (...). >> (Egal, an welchen USB-Anschluß der Scanner angestöpselt wird, ein Bus 004 >> wird für ihn nie gemeldet. Hängt der ggf. an USB-2.0 statt USB-30 trotz >> blauer Kennzeichnung der entsprechenden Anschlüsse?) >> (...). > Hast du mal alle USB-Ports ausprobiert? Hallo, ja, das habe ich. > Und ich hab irgendwo in den Kommentaren gelesen, dass man den Scanner vor > dem Einstecken entriegeln (unlock) muss: > https://bugs.launchpad.net/ubuntu/+source/xsane/+bug/601652 Klasse - das war's, jetzt läuft das Biest problemlos. MfG Hermann -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe(a)opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner(a)opensuse.org

1 0