April 2016 - openSUSE Updates - openSUSE Mailing Lists

openSUSE-SU-2016:1016-1: important: Security update for mercurial
by opensuse-security＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Security Update: Security update for mercurial ______________________________________________________________________________ Announcement ID: openSUSE-SU-2016:1016-1 Rating: important References: #973175 #973176 #973177 Cross-References: CVE-2016-3068 CVE-2016-3069 CVE-2016-3630 Affected Products: openSUSE 13.2 ______________________________________________________________________________ An update that fixes three vulnerabilities is now available. Description: mercurial was updated to fix three security issues. These security issues were fixed: - CVE-2016-3069: Arbitrary code execution when converting Git repos (bsc#973176). - CVE-2016-3068: Arbitrary code execution with Git subrepos (bsc#973177). - CVE-2016-3630: Remote code execution in binary delta decoding (bsc#973175). Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 13.2: zypper in -t patch openSUSE-2016-452=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 13.2 (i586 x86_64): mercurial-3.1.2-7.1 mercurial-debuginfo-3.1.2-7.1 mercurial-debugsource-3.1.2-7.1 - openSUSE 13.2 (noarch): mercurial-lang-3.1.2-7.1 References: https://www.suse.com/security/cve/CVE-2016-3068.html https://www.suse.com/security/cve/CVE-2016-3069.html https://www.suse.com/security/cve/CVE-2016-3630.html https://bugzilla.suse.com/973175 https://bugzilla.suse.com/973176 https://bugzilla.suse.com/973177

1 0

openSUSE-SU-2016:1015-1: moderate: Security update for clamav-database
by opensuse-security＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Security Update: Security update for clamav-database ______________________________________________________________________________ Announcement ID: openSUSE-SU-2016:1015-1 Rating: moderate References: Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that contains security fixes can now be installed. Description: This update provides a database refresh for the clamav-database. This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-451=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (noarch): clamav-database-201604110002-74.1 References:

1 0

openSUSE-RU-2016:1014-1: Recommended update for python-M2Crypto
by maintenance＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Recommended Update: Recommended update for python-M2Crypto ______________________________________________________________________________ Announcement ID: openSUSE-RU-2016:1014-1 Rating: low References: #917759 #917815 #969731 Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that has three recommended fixes can now be installed. Description: This update for python-M2Crypto fixes the following issues: - Manually install _m2crypto shadow file: setup.py misses it. (bsc#917759, bsc#917815) - Fix SSLv2 link error for 13.2 and Leap 42.1. (bsc#969731) - Fix generation of M2Crypto module when using SWIG 3.0.5. This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-447=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (i586 x86_64): python-M2Crypto-0.22.5-5.1 python-M2Crypto-debuginfo-0.22.5-5.1 python-M2Crypto-debugsource-0.22.5-5.1 References: https://bugzilla.suse.com/917759 https://bugzilla.suse.com/917815 https://bugzilla.suse.com/969731

1 0

openSUSE-RU-2016:1013-1: moderate: Recommended update for virt-manager, libosinfo
by maintenance＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Recommended Update: Recommended update for virt-manager, libosinfo ______________________________________________________________________________ Announcement ID: openSUSE-RU-2016:1013-1 Rating: moderate References: #947129 #955401 #956756 #960724 #960828 #963173 #964407 Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that has 7 recommended fixes can now be installed. Description: This update for virt-manager and libosinfo fixes the following issues: - Installer wrongly detects SLE-12-GA media as SLE-12-SP1. (bsc#964407, bsc#956756) - Dependencies for VNC client are not met on PPC. (bsc#963173) - Unable to create qcow2 volumes on remote KVM with virt-manager. (bsc#960828) - Failure to create virtual machines on a CentOS 7 host. (bsc#960724) - Can't create VM without disk: "list index out of range". (bsc#955401) - Error launching manager: 'URI' is not in list. (bsc#947129) Part of this update was imported from the SUSE:SLE-12-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-449=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (i586 x86_64): libosinfo-0.2.12-13.1 libosinfo-1_0-0-0.2.12-13.1 libosinfo-1_0-0-debuginfo-0.2.12-13.1 libosinfo-debuginfo-0.2.12-13.1 libosinfo-debugsource-0.2.12-13.1 libosinfo-devel-0.2.12-13.1 typelib-1_0-Libosinfo-1_0-0.2.12-13.1 - openSUSE Leap 42.1 (noarch): libosinfo-lang-0.2.12-13.1 virt-install-1.2.1-7.2 virt-manager-1.2.1-7.2 virt-manager-common-1.2.1-7.2 References: https://bugzilla.suse.com/947129 https://bugzilla.suse.com/955401 https://bugzilla.suse.com/956756 https://bugzilla.suse.com/960724 https://bugzilla.suse.com/960828 https://bugzilla.suse.com/963173 https://bugzilla.suse.com/964407

1 0

openSUSE-RU-2016:1012-1: moderate: Recommended update for libzypp, zypper
by maintenance＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Recommended Update: Recommended update for libzypp, zypper ______________________________________________________________________________ Announcement ID: openSUSE-RU-2016:1012-1 Rating: moderate References: #580902 #948924 #953214 #955801 #965027 #966760 #967673 #968006 #968254 #969186 #970575 Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that has 11 recommended fixes can now be installed. Description: This update for the Software Update Stack provides fixes and enhancements. libzypp: - Send stats header to download.opensuse.org only. (bsc#955801) - Show progress bar when installing source packages. (bsc#580902) zypper: - Don't check for zypp lock in command versioncmp. (bsc#970575) - Rephrase unclear explanation of --non-interactive in man page. (bsc#969186) - Add missing --non-interactive-include-reboot-patches option to man page. - Enhance description of Download-and-install mode options in man page. (bsc#968254) - Return error code 106 (ZYPPER_EXIT_INF_REPOS_SKIPPED) if repos were skipped due to a failing refresh. (bsc#968006) - Fix repository import to honor enable and auto-refresh flags. (bsc#967673) - Fix addlock man page header. (bsc#966760) - Fix spec file to use the correct translation set. (bsc#948924) - Fix typos in man page. (bsc#953214) - Fail if tty is bad or at EOF when reading user input. (bsc#965027) - Show progress bar when installing source packages. (bsc#580902) This update was imported from the SUSE:SLE-12-SP1:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-448=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (i586 x86_64): libsolv-debugsource-0.6.19-6.1 libsolv-demo-0.6.19-6.1 libsolv-demo-debuginfo-0.6.19-6.1 libsolv-devel-0.6.19-6.1 libsolv-devel-debuginfo-0.6.19-6.1 libsolv-tools-0.6.19-6.1 libsolv-tools-debuginfo-0.6.19-6.1 libzypp-15.21.4-6.1 libzypp-debuginfo-15.21.4-6.1 libzypp-debugsource-15.21.4-6.1 libzypp-devel-15.21.4-6.1 libzypp-devel-doc-15.21.4-6.1 perl-solv-0.6.19-6.1 perl-solv-debuginfo-0.6.19-6.1 python-solv-0.6.19-6.1 python-solv-debuginfo-0.6.19-6.1 ruby-solv-0.6.19-6.1 ruby-solv-debuginfo-0.6.19-6.1 zypper-1.12.37-6.1 zypper-debuginfo-1.12.37-6.1 zypper-debugsource-1.12.37-6.1 - openSUSE Leap 42.1 (noarch): zypper-aptitude-1.12.37-6.1 zypper-log-1.12.37-6.1 References: https://bugzilla.suse.com/580902 https://bugzilla.suse.com/948924 https://bugzilla.suse.com/953214 https://bugzilla.suse.com/955801 https://bugzilla.suse.com/965027 https://bugzilla.suse.com/966760 https://bugzilla.suse.com/967673 https://bugzilla.suse.com/968006 https://bugzilla.suse.com/968254 https://bugzilla.suse.com/969186 https://bugzilla.suse.com/970575

1 0

openSUSE-RU-2016:1009-1: moderate: Recommended update for libgcrypt
by maintenance＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Recommended Update: Recommended update for libgcrypt ______________________________________________________________________________ Announcement ID: openSUSE-RU-2016:1009-1 Rating: moderate References: #970882 Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for libgcrypt fixes a crash in GPG key generation when operating in FIPS mode. (bsc#970882) This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Recommended Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-450=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (i586 x86_64): libgcrypt-cavs-1.6.1-23.1 libgcrypt-cavs-debuginfo-1.6.1-23.1 libgcrypt-debugsource-1.6.1-23.1 libgcrypt-devel-1.6.1-23.1 libgcrypt-devel-debuginfo-1.6.1-23.1 libgcrypt20-1.6.1-23.1 libgcrypt20-debuginfo-1.6.1-23.1 libgcrypt20-hmac-1.6.1-23.1 - openSUSE Leap 42.1 (x86_64): libgcrypt-devel-32bit-1.6.1-23.1 libgcrypt-devel-debuginfo-32bit-1.6.1-23.1 libgcrypt20-32bit-1.6.1-23.1 libgcrypt20-debuginfo-32bit-1.6.1-23.1 libgcrypt20-hmac-32bit-1.6.1-23.1 References: https://bugzilla.suse.com/970882

1 0

openSUSE-SU-2016:1008-1: important: Security update for the Linux Kernel
by opensuse-security＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Security Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-SU-2016:1008-1 Rating: important References: #814440 #884701 #949936 #951440 #951542 #951626 #951638 #953527 #954018 #954404 #954405 #954876 #958439 #958463 #958504 #959709 #960561 #960563 #960710 #961263 #961500 #961509 #962257 #962866 #962977 #963746 #963765 #963767 #963931 #965125 #966137 #966179 #966259 #966437 #966684 #966693 #968018 #969356 #969582 #970845 #971125 Cross-References: CVE-2015-1339 CVE-2015-7799 CVE-2015-7872 CVE-2015-7884 CVE-2015-8104 CVE-2015-8709 CVE-2015-8767 CVE-2015-8785 CVE-2015-8787 CVE-2015-8812 CVE-2016-0723 CVE-2016-2069 CVE-2016-2184 CVE-2016-2383 CVE-2016-2384 Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that solves 15 vulnerabilities and has 26 fixes is now available. Description: The openSUSE Leap 42.1 kernel was updated to 4.1.20 to receive various security and bugfixes. The following security bugs were fixed: - CVE-2015-1339: A memory leak in cuse could be used to exhaust kernel memory. (bsc#969356). - CVE-2015-7799: The slhc_init function in drivers/net/slip/slhc.c in the Linux kernel did not ensure that certain slot numbers are valid, which allowed local users to cause a denial of service (NULL pointer dereference and system crash) via a crafted PPPIOCSMAXCID ioctl call (bnc#949936 951638). - CVE-2015-7872: The key_gc_unused_keys function in security/keys/gc.c in the Linux kernel allowed local users to cause a denial of service (OOPS) via crafted keyctl commands (bnc#951440). - CVE-2015-7884: The vivid_fb_ioctl function in drivers/media/platform/vivid/vivid-osd.c in the Linux kernel did not initialize a certain structure member, which allowed local users to obtain sensitive information from kernel memory via a crafted application (bnc#951626). - CVE-2015-8104: The KVM subsystem in the Linux kernel allowed guest OS users to cause a denial of service (host OS panic or hang) by triggering many #DB (aka Debug) exceptions, related to svm.c (bnc#954404). - CVE-2015-8709: kernel/ptrace.c in the Linux kernel mishandled uid and gid mappings, which allowed local users to gain privileges by establishing a user namespace, waiting for a root process to enter that namespace with an unsafe uid or gid, and then using the ptrace system call. NOTE: the vendor states "there is no kernel bug here (bnc#959709). - CVE-2015-8767: net/sctp/sm_sideeffect.c in the Linux kernel did not properly manage the relationship between a lock and a socket, which allowed local users to cause a denial of service (deadlock) via a crafted sctp_accept call. (bsc#961509) - CVE-2015-8785: The fuse_fill_write_pages function in fs/fuse/file.c in the Linux kernel allowed local users to cause a denial of service (infinite loop) via a writev system call that triggers a zero length for the first segment of an iov (bnc#963765). - CVE-2015-8787: The nf_nat_redirect_ipv4 function in net/netfilter/nf_nat_redirect.c in the Linux kernel allowed remote attackers to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact by sending certain IPv4 packets to an incompletely configured interface, a related issue to CVE-2003-1604 (bnc#963931). - CVE-2015-8812: A flaw was found in the CXGB3 kernel driver when the network was considered congested. The kernel would incorrectly misinterpret the congestion as an error condition and incorrectly free/clean up the skb. When the device would then send the skb's queued, these structures would be referenced and may panic the system or allow an attacker to escalate privileges in a use-after-free scenario. (bsc#966437). - CVE-2016-0723: Race condition in the tty_ioctl function in drivers/tty/tty_io.c in the Linux kernel allowed local users to obtain sensitive information from kernel memory or cause a denial of service (use-after-free and system crash) by making a TIOCGETD ioctl call during processing of a TIOCSETD ioctl call (bnc#961500). - CVE-2016-2069: When Linux invalidated a paging structure that is not in use locally, it could, in principle, race against another CPU that is switching to a process that uses the paging structure in question. (bsc#963767) - CVE-2016-2184: A malicious USB device could cause a kernel crash in the alsa usb-audio driver. (bsc#971125) - CVE-2016-2383: Incorrect branch fixups for eBPF allow arbitrary read of kernel memory. (bsc#966684) - CVE-2016-2384: A malicious USB device could cause a kernel crash in the alsa usb-audio driver. (bsc#966693) The following non-security bugs were fixed: - alsa: hda - Apply clock gate workaround to Skylake, too (bsc#966137). - alsa: hda - disable dynamic clock gating on Broxton before reset (bsc#966137). - alsa: hda - Fix playback noise with 24/32 bit sample size on BXT (bsc#966137). - alsa: seq: Fix double port list deletion (bsc#968018). - alsa: seq: Fix leak of pool buffer at concurrent writes (bsc#968018). - alsa: timer: Fix race between stop and interrupt (bsc#968018). - alsa: timer: Fix wrong instance passed to slave callbacks (bsc#968018). - arm64: Add workaround for Cavium erratum 27456. - arm64: Backport arm64 patches from SLE12-SP1-ARM - btrfs: teach backref walking about backrefs with underflowed (bsc#966259). - cgroup kabi fix for 4.1.19. - config: Disable CONFIG_DDR. CONFIG_DDR is selected automatically by drivers which need it. - config: Disable MFD_TPS65218 The TPS65218 is a power management IC for 32-bit ARM systems. - config: Modularize NF_REJECT_IPV4/V6 There is no reason why these helper modules should be built-in when the rest of netfilter is built as modules. - config: Update x86 config files: Enable Intel RAPL This driver is useful when power caping is needed. It was enabled in the SLE kernel 2 years ago. - Delete patches.fixes/bridge-module-get-put.patch. As discussed in http://lists.opensuse.org/opensuse-kernel/2015-11/msg00046.html - drm/i915: Fix double unref in intelfb_alloc failure path (boo#962866, boo#966179). - drm/i915: Fix failure paths around initial fbdev allocation (boo#962866, boo#966179). - drm/i915: Pin the ifbdev for the info->system_base GGTT mmapping (boo#962866, boo#966179). - e1000e: Avoid divide by zero error (bsc#965125). - e1000e: fix division by zero on jumbo MTUs (bsc#965125). - e1000e: fix systim issues (bsc#965125). - e1000e: Fix tight loop implementation of systime read algorithm (bsc#965125). - ibmvnic: Fix ibmvnic_capability struct. - intel: Disable Skylake support in intel_idle driver again (boo#969582) This turned out to bring a regression on some machines, unfortunately. It should be addressed in the upstream at first. - intel_idle: allow idle states to be freeze-mode specific (boo#969582). - intel_idle: Skylake Client Support (boo#969582). - intel_idle: Skylake Client Support - updated (boo#969582). - libceph: fix scatterlist last_piece calculation (bsc#963746). - lio: Add LIO clustered RBD backend (fate#318836) - net kabi fixes for 4.1.19. - numa patches updated to v15 - ocfs2: fix dlmglue deadlock issue(bnc#962257) - pci: thunder: Add driver for ThunderX-pass{1,2} on-chip devices - pci: thunder: Add PCIe host driver for ThunderX processors - sd: Optimal I/O size is in bytes, not sectors (boo#961263). - sd: Reject optimal transfer length smaller than page size (boo#961263). - series.conf: move cxgb3 patch to network drivers section Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-445=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (i586 x86_64): kernel-default-4.1.20-11.1 kernel-default-base-4.1.20-11.1 kernel-default-base-debuginfo-4.1.20-11.1 kernel-default-debuginfo-4.1.20-11.1 kernel-default-debugsource-4.1.20-11.1 kernel-default-devel-4.1.20-11.1 kernel-obs-build-4.1.20-11.2 kernel-obs-build-debugsource-4.1.20-11.2 kernel-obs-qa-4.1.20-11.1 kernel-obs-qa-xen-4.1.20-11.1 kernel-syms-4.1.20-11.1 - openSUSE Leap 42.1 (i686 x86_64): kernel-debug-4.1.20-11.1 kernel-debug-base-4.1.20-11.1 kernel-debug-base-debuginfo-4.1.20-11.1 kernel-debug-debuginfo-4.1.20-11.1 kernel-debug-debugsource-4.1.20-11.1 kernel-debug-devel-4.1.20-11.1 kernel-debug-devel-debuginfo-4.1.20-11.1 kernel-ec2-4.1.20-11.1 kernel-ec2-base-4.1.20-11.1 kernel-ec2-base-debuginfo-4.1.20-11.1 kernel-ec2-debuginfo-4.1.20-11.1 kernel-ec2-debugsource-4.1.20-11.1 kernel-ec2-devel-4.1.20-11.1 kernel-pv-4.1.20-11.1 kernel-pv-base-4.1.20-11.1 kernel-pv-base-debuginfo-4.1.20-11.1 kernel-pv-debuginfo-4.1.20-11.1 kernel-pv-debugsource-4.1.20-11.1 kernel-pv-devel-4.1.20-11.1 kernel-vanilla-4.1.20-11.1 kernel-vanilla-debuginfo-4.1.20-11.1 kernel-vanilla-debugsource-4.1.20-11.1 kernel-vanilla-devel-4.1.20-11.1 kernel-xen-4.1.20-11.1 kernel-xen-base-4.1.20-11.1 kernel-xen-base-debuginfo-4.1.20-11.1 kernel-xen-debuginfo-4.1.20-11.1 kernel-xen-debugsource-4.1.20-11.1 kernel-xen-devel-4.1.20-11.1 - openSUSE Leap 42.1 (noarch): kernel-devel-4.1.20-11.1 kernel-docs-4.1.20-11.3 kernel-docs-html-4.1.20-11.3 kernel-docs-pdf-4.1.20-11.3 kernel-macros-4.1.20-11.1 kernel-source-4.1.20-11.1 kernel-source-vanilla-4.1.20-11.1 - openSUSE Leap 42.1 (i686): kernel-pae-4.1.20-11.1 kernel-pae-base-4.1.20-11.1 kernel-pae-base-debuginfo-4.1.20-11.1 kernel-pae-debuginfo-4.1.20-11.1 kernel-pae-debugsource-4.1.20-11.1 kernel-pae-devel-4.1.20-11.1 References: https://www.suse.com/security/cve/CVE-2015-1339.html https://www.suse.com/security/cve/CVE-2015-7799.html https://www.suse.com/security/cve/CVE-2015-7872.html https://www.suse.com/security/cve/CVE-2015-7884.html https://www.suse.com/security/cve/CVE-2015-8104.html https://www.suse.com/security/cve/CVE-2015-8709.html https://www.suse.com/security/cve/CVE-2015-8767.html https://www.suse.com/security/cve/CVE-2015-8785.html https://www.suse.com/security/cve/CVE-2015-8787.html https://www.suse.com/security/cve/CVE-2015-8812.html https://www.suse.com/security/cve/CVE-2016-0723.html https://www.suse.com/security/cve/CVE-2016-2069.html https://www.suse.com/security/cve/CVE-2016-2184.html https://www.suse.com/security/cve/CVE-2016-2383.html https://www.suse.com/security/cve/CVE-2016-2384.html https://bugzilla.suse.com/814440 https://bugzilla.suse.com/884701 https://bugzilla.suse.com/949936 https://bugzilla.suse.com/951440 https://bugzilla.suse.com/951542 https://bugzilla.suse.com/951626 https://bugzilla.suse.com/951638 https://bugzilla.suse.com/953527 https://bugzilla.suse.com/954018 https://bugzilla.suse.com/954404 https://bugzilla.suse.com/954405 https://bugzilla.suse.com/954876 https://bugzilla.suse.com/958439 https://bugzilla.suse.com/958463 https://bugzilla.suse.com/958504 https://bugzilla.suse.com/959709 https://bugzilla.suse.com/960561 https://bugzilla.suse.com/960563 https://bugzilla.suse.com/960710 https://bugzilla.suse.com/961263 https://bugzilla.suse.com/961500 https://bugzilla.suse.com/961509 https://bugzilla.suse.com/962257 https://bugzilla.suse.com/962866 https://bugzilla.suse.com/962977 https://bugzilla.suse.com/963746 https://bugzilla.suse.com/963765 https://bugzilla.suse.com/963767 https://bugzilla.suse.com/963931 https://bugzilla.suse.com/965125 https://bugzilla.suse.com/966137 https://bugzilla.suse.com/966179 https://bugzilla.suse.com/966259 https://bugzilla.suse.com/966437 https://bugzilla.suse.com/966684 https://bugzilla.suse.com/966693 https://bugzilla.suse.com/968018 https://bugzilla.suse.com/969356 https://bugzilla.suse.com/969582 https://bugzilla.suse.com/970845 https://bugzilla.suse.com/971125

1 0

openSUSE-SU-2016:1007-1: moderate: Security update for cairo
by opensuse-security＠opensuse.org 12 Apr '16

12 Apr '16

openSUSE Security Update: Security update for cairo ______________________________________________________________________________ Announcement ID: openSUSE-SU-2016:1007-1 Rating: moderate References: #971964 Cross-References: CVE-2016-3190 Affected Products: openSUSE 13.2 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: cairo was updated to fix one security issue. This security issue was fixed: - CVE-2016-3190: Out of bounds read in fill_xrgb32_lerp_opaque_spans (bsc#971964). Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE 13.2: zypper in -t patch openSUSE-2016-446=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE 13.2 (i586 x86_64): cairo-debugsource-1.14.0-7.11.1 cairo-devel-1.14.0-7.11.1 cairo-tools-1.14.0-7.11.1 cairo-tools-debuginfo-1.14.0-7.11.1 libcairo-gobject2-1.14.0-7.11.1 libcairo-gobject2-debuginfo-1.14.0-7.11.1 libcairo-script-interpreter2-1.14.0-7.11.1 libcairo-script-interpreter2-debuginfo-1.14.0-7.11.1 libcairo2-1.14.0-7.11.1 libcairo2-debuginfo-1.14.0-7.11.1 - openSUSE 13.2 (x86_64): cairo-devel-32bit-1.14.0-7.11.1 libcairo-gobject2-32bit-1.14.0-7.11.1 libcairo-gobject2-debuginfo-32bit-1.14.0-7.11.1 libcairo-script-interpreter2-32bit-1.14.0-7.11.1 libcairo-script-interpreter2-debuginfo-32bit-1.14.0-7.11.1 libcairo2-32bit-1.14.0-7.11.1 libcairo2-debuginfo-32bit-1.14.0-7.11.1 References: https://www.suse.com/security/cve/CVE-2016-3190.html https://bugzilla.suse.com/971964

1 0

openSUSE-SU-2016:1005-1: important: Security update for java-1_8_0-openjdk
by opensuse-security＠opensuse.org 11 Apr '16

11 Apr '16

openSUSE Security Update: Security update for java-1_8_0-openjdk ______________________________________________________________________________ Announcement ID: openSUSE-SU-2016:1005-1 Rating: important References: #972468 Cross-References: CVE-2016-0636 Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: This update for java-1_8_0-openjdk to version jdk8u77-b03 fixes the following security issue: * CVE-2016-0636: Improve MethodHandle consistency, which had allowed attackers to execute code. (bsc#972468) This update was imported from the SUSE:SLE-12-SP1:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-443=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (i586 x86_64): java-1_8_0-openjdk-1.8.0.77-9.1 java-1_8_0-openjdk-accessibility-1.8.0.77-9.1 java-1_8_0-openjdk-debuginfo-1.8.0.77-9.1 java-1_8_0-openjdk-debugsource-1.8.0.77-9.1 java-1_8_0-openjdk-demo-1.8.0.77-9.1 java-1_8_0-openjdk-demo-debuginfo-1.8.0.77-9.1 java-1_8_0-openjdk-devel-1.8.0.77-9.1 java-1_8_0-openjdk-headless-1.8.0.77-9.1 java-1_8_0-openjdk-headless-debuginfo-1.8.0.77-9.1 java-1_8_0-openjdk-src-1.8.0.77-9.1 - openSUSE Leap 42.1 (noarch): java-1_8_0-openjdk-javadoc-1.8.0.77-9.1 References: https://www.suse.com/security/cve/CVE-2016-0636.html https://bugzilla.suse.com/972468

1 0

openSUSE-SU-2016:1004-1: important: Security update for java-1_7_0-openjdk
by opensuse-security＠opensuse.org 11 Apr '16

11 Apr '16

openSUSE Security Update: Security update for java-1_7_0-openjdk ______________________________________________________________________________ Announcement ID: openSUSE-SU-2016:1004-1 Rating: important References: #972468 Cross-References: CVE-2016-0636 Affected Products: openSUSE Leap 42.1 ______________________________________________________________________________ An update that fixes one vulnerability is now available. Description: The OpenJDK Java java-1_7_0-openjdk was updated to 2.6.5 to fix the following issues: Update to 2.6.5 - OpenJDK 7u99 (bsc#972468) * Security fixes - S8152335, CVE-2016-0636: Improve MethodHandle consistency * Import of OpenJDK 7 u99 build 0 - S6425769, PR2858: Allow specifying an address to bind JMX remote connector - S6961123: setWMClass fails to null-terminate WM_CLASS string - S8145982, PR2858: JMXInterfaceBindingTest is failing intermittently - S8146015, PR2858: JMXInterfaceBindingTest is failing intermittently for IPv6 addresses * Backports - S8028727, PR2814: [parfait] warnings from b116 for jdk.src.share.native.sun.security.ec: JNI pending exceptions - S8048512, PR2814: Uninitialised memory in jdk/src/share/native/sun/security/ec/ECC_JNI.cpp - S8071705. PR2819, RH1182694: Java application menu misbehaves when running multiple screen stacked vertically - S8150954, PR2866, RH1176206: AWT Robot not compatible with GNOME Shell * Bug fixes - PR2803: Make system CUPS optional - PR2886: Location of 'stap' executable is hard-coded - PR2893: test/tapset/jstaptest.pl should be executable - PR2894: Add missing test directory in make check. * CACAO - PR2781, CA195: typeinfo.cpp: typeinfo_merge_nonarrays: Assertion `dest && result && x.any && y.any' failed * AArch64 port - PR2852: Add support for large code cache - PR2852: Apply ReservedCodeCacheSize default limiting to AArch64 only. - S8081289, PR2852: aarch64: add support for RewriteFrequentPairs in interpreter - S8131483, PR2852: aarch64: illegal stlxr instructions - S8133352, PR2852: aarch64: generates constrained unpredictable instructions - S8133842, PR2852: aarch64: C2 generates illegal instructions with int shifts >=32 - S8134322, PR2852: AArch64: Fix several errors in C2 biased locking implementation - S8136615, PR2852: aarch64: elide DecodeN when followed by CmpP 0 - S8138575, PR2852: Improve generated code for profile counters - S8138641, PR2852: Disable C2 peephole by default for aarch64 - S8138966, PR2852: Intermittent SEGV running ParallelGC - S8143067, PR2852: aarch64: guarantee failure in javac - S8143285, PR2852: aarch64: Missing load acquire when checking if ConstantPoolCacheEntry is resolved - S8143584, PR2852: Load constant pool tag and class status with load acquire - S8144201, PR2852: aarch64: jdk/test/com/sun/net/httpserver/Test6a.java fails with --enable-unlimited-crypto - S8144582, PR2852: AArch64 does not generate correct branch profile data - S8146709, PR2852: AArch64: Incorrect use of ADRP for byte_map_base - S8147805, PR2852: aarch64: C1 segmentation fault due to inline Unsafe.getAndSetObject - S8148240, PR2852: aarch64: random infrequent null pointer exceptions in javac * PPC & AIX port - S8034797, PR2851: AIX: Fix os::naked_short_sleep() in os_aix.cpp after 8028280 - S8139258, PR2851: PPC64LE: argument passing problem when passing 15 floats in native call - S8139421, PR2851: PPC64LE: MacroAssembler::bxx64_patchable kill register R12 Update to 2.6.5 - OpenJDK 7u99 (bsc#972468) * Security fixes - S8152335, CVE-2016-0636: Improve MethodHandle consistency * Import of OpenJDK 7 u99 build 0 - S6425769, PR2858: Allow specifying an address to bind JMX remote connector - S6961123: setWMClass fails to null-terminate WM_CLASS string - S8145982, PR2858: JMXInterfaceBindingTest is failing intermittently - S8146015, PR2858: JMXInterfaceBindingTest is failing intermittently for IPv6 addresses * Backports - S8028727, PR2814: [parfait] warnings from b116 for jdk.src.share.native.sun.security.ec: JNI pending exceptions - S8048512, PR2814: Uninitialised memory in jdk/src/share/native/sun/security/ec/ECC_JNI.cpp - S8071705. PR2819, RH1182694: Java application menu misbehaves when running multiple screen stacked vertically - S8150954, PR2866, RH1176206: AWT Robot not compatible with GNOME Shell * Bug fixes - PR2803: Make system CUPS optional - PR2886: Location of 'stap' executable is hard-coded - PR2893: test/tapset/jstaptest.pl should be executable - PR2894: Add missing test directory in make check. * CACAO - PR2781, CA195: typeinfo.cpp: typeinfo_merge_nonarrays: Assertion `dest && result && x.any && y.any' failed * AArch64 port - PR2852: Add support for large code cache - PR2852: Apply ReservedCodeCacheSize default limiting to AArch64 only. - S8081289, PR2852: aarch64: add support for RewriteFrequentPairs in interpreter - S8131483, PR2852: aarch64: illegal stlxr instructions - S8133352, PR2852: aarch64: generates constrained unpredictable instructions - S8133842, PR2852: aarch64: C2 generates illegal instructions with int shifts >=32 - S8134322, PR2852: AArch64: Fix several errors in C2 biased locking implementation - S8136615, PR2852: aarch64: elide DecodeN when followed by CmpP 0 - S8138575, PR2852: Improve generated code for profile counters - S8138641, PR2852: Disable C2 peephole by default for aarch64 - S8138966, PR2852: Intermittent SEGV running ParallelGC - S8143067, PR2852: aarch64: guarantee failure in javac - S8143285, PR2852: aarch64: Missing load acquire when checking if ConstantPoolCacheEntry is resolved - S8143584, PR2852: Load constant pool tag and class status with load acquire - S8144201, PR2852: aarch64: jdk/test/com/sun/net/httpserver/Test6a.java fails with --enable-unlimited-crypto - S8144582, PR2852: AArch64 does not generate correct branch profile data - S8146709, PR2852: AArch64: Incorrect use of ADRP for byte_map_base - S8147805, PR2852: aarch64: C1 segmentation fault due to inline Unsafe.getAndSetObject - S8148240, PR2852: aarch64: random infrequent null pointer exceptions in javac * PPC & AIX port - S8034797, PR2851: AIX: Fix os::naked_short_sleep() in os_aix.cpp after 8028280 - S8139258, PR2851: PPC64LE: argument passing problem when passing 15 floats in native call - S8139421, PR2851: PPC64LE: MacroAssembler::bxx64_patchable kill register R12 This update was imported from the SUSE:SLE-12:Update update project. Patch Instructions: To install this openSUSE Security Update use YaST online_update. Alternatively you can run the command listed for your product: - openSUSE Leap 42.1: zypper in -t patch openSUSE-2016-444=1 To bring your system up-to-date, use "zypper patch". Package List: - openSUSE Leap 42.1 (i586 x86_64): java-1_7_0-openjdk-1.7.0.99-28.1 java-1_7_0-openjdk-accessibility-1.7.0.99-28.1 java-1_7_0-openjdk-bootstrap-1.7.0.99-28.1 java-1_7_0-openjdk-bootstrap-debuginfo-1.7.0.99-28.1 java-1_7_0-openjdk-bootstrap-debugsource-1.7.0.99-28.1 java-1_7_0-openjdk-bootstrap-devel-1.7.0.99-28.1 java-1_7_0-openjdk-bootstrap-devel-debuginfo-1.7.0.99-28.1 java-1_7_0-openjdk-bootstrap-headless-1.7.0.99-28.1 java-1_7_0-openjdk-bootstrap-headless-debuginfo-1.7.0.99-28.1 java-1_7_0-openjdk-debuginfo-1.7.0.99-28.1 java-1_7_0-openjdk-debugsource-1.7.0.99-28.1 java-1_7_0-openjdk-demo-1.7.0.99-28.1 java-1_7_0-openjdk-demo-debuginfo-1.7.0.99-28.1 java-1_7_0-openjdk-devel-1.7.0.99-28.1 java-1_7_0-openjdk-devel-debuginfo-1.7.0.99-28.1 java-1_7_0-openjdk-headless-1.7.0.99-28.1 java-1_7_0-openjdk-headless-debuginfo-1.7.0.99-28.1 java-1_7_0-openjdk-src-1.7.0.99-28.1 - openSUSE Leap 42.1 (noarch): java-1_7_0-openjdk-javadoc-1.7.0.99-28.1 References: https://www.suse.com/security/cve/CVE-2016-0636.html https://bugzilla.suse.com/972468

1 0