My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please? --doug
Op vrijdag 29 januari 2021 03:38:32 CET schreef Doug McGarrett:
My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please?
--doug If all is well, in YaST - Hardware - Printer Select the Epson Edit the config and change that from A4 to US Letter. That should be all.
-- Gertjan Lettink a.k.a. Knurpht openSUSE Board openSUSE Forums Team
On 1/28/21 9:44 PM, Knurpht-openSUSE wrote:
Op vrijdag 29 januari 2021 03:38:32 CET schreef Doug McGarrett:
My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please?
--doug If all is well, in YaST - Hardware - Printer Select the Epson Edit the config and change that from A4 to US Letter. That should be all.
This was a bit of an exercise; I couldn't clear the print queue, but I finally did, and then I got the printer accepting US letter. Thank you for your assistance! --doug
On 1/28/21 9:38 PM, Doug McGarrett wrote:
My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please?
--doug
YaST/Printer, select printer, hit Edit, on page displayed there is a switch for "default paper size", or it may be under the "all options for the current driver" button. --dg
On 1/28/21 9:38 PM, Doug McGarrett wrote:
My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please?
--doug
YaST/Printer, select printer, hit Edit, on page displayed there is a switch for "default paper size", or it may be under the "all options for the current driver" button.
--dg Yes, I'm aware of that, but it seems that it either doesn't work, or it works for one print job and then reverts. I don't know what to do next. I wonder if the paper size is hard coded into the ppd file? (I had a lot of trouble getting
On 1/29/21 12:42 PM, DennisG wrote: this printer installed, and while I was just printing single pages on one side, all was fine. Then I ran into the paper size problem. The printer will stop and complain, and not continue if it senses letter paper.) The previous correspondence from me indicated that I thought the problem was solved, but it ain't! --doug
On 30/01/2021 09.06, Doug McGarrett wrote:
On 1/28/21 9:38 PM, Doug McGarrett wrote:
My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please?
--doug
YaST/Printer, select printer, hit Edit, on page displayed there is a switch for "default paper size", or it may be under the "all options for the current driver" button.
--dg Yes, I'm aware of that, but it seems that it either doesn't work, or it works for one print job and then reverts. I don't know what to do next. I wonder if the paper size is hard coded into the ppd file? (I had a lot of trouble getting
On 1/29/21 12:42 PM, DennisG wrote: this printer installed, and while I was just printing single pages on one side, all was fine. Then I ran into the paper size problem. The printer will stop and complain, and not continue if it senses letter paper.) The previous correspondence from me indicated that I thought the problem was solved, but it ain't! --doug
http://localhost:631/ --> printers --> select yours. --> administration --> set default options --> query printer for default options Page size here shows under "General". -- Cheers / Saludos, Carlos E. R. (from 15.2 x86_64 at Telcontar)
On Thu 28 Jan 2021 09:38:32 PM CST, Doug McGarrett wrote:
My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please?
--doug
Hi Does the printer have a LCD and menu system? If so set the default paper size in here... That will at least confirm if it's a printer driver issue. -- Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890) Tumbleweed 20210131 | GNOME Shell 3.38.3 | 5.10.9-1-default Intel DQ77MK MB | Xeon E3-1245 V2 X8 @ 3.40 GHz | Intel/Nvidia up 1 day 18:51, 2 users, load average: 0.82, 1.15, 0.93
On 03/02/2021 14.27, Malcolm wrote:
On Thu 28 Jan 2021 09:38:32 PM CST, Doug McGarrett wrote:
My Epson printer will try to print on a European size instead of letter with source material that does not explicitly specify to use letter (8.5 x 11 inches). The LaserJet is OK with the US size. Where and how should I change the default size for the Epson printer, please?
Hi Does the printer have a LCD and menu system? If so set the default paper size in here... That will at least confirm if it's a printer driver issue.
No, the issue is (apparently) that the printer default is Letter and contains Letter sized paper - as normal in North America - but CUPS is configured to default to A4. Maybe the locale is set wrong. -- Cheers / Saludos, Carlos E. R. (from 15.2 x86_64 at Telcontar)
participants (6)
-
Carlos E. R. -
Carlos E.R. -
DennisG -
Doug McGarrett -
Knurpht-openSUSE -
Malcolm