Hi,

xsane-0.999-lp151.2.3.x86_64.rpm

simple-scan-3.34.2-lp152.1.4.x86_64.rpm

skanlite-2.1.0.1-lp152.3.13.x86_64.rpm

and the correct adaptions of SANE to the HP Scanjet 5300c have been made.

If I try to scan e.g. an A4 page (210 x 297 mm) in 200 x 200 dpi scanning works.

In the basic menue the following parameters are shown:

1648 *2326*24 (11,0MB)

209,49 mm x 296,16 mm

In the previewer of the scan the size is indicated as 1648 * 4652 pixel, ..., 200 dpi x 200 dpi

If I save the scanned as page .pdf it has the double height (as indicated by the above values)

What can I do now?

Mit freundlichen Grüßen / Kind regards

Michael Kasimir

Be Free, Be Linux