June 2018 - openSUSE Support - openSUSE Mailing Lists

[opensuse-support] latest Tumbleweed snapshot: Digest verification failed for file 'ghc-base-4.11.1.0-1.1.x86_64.rpm'
by mh＠mike.franken.de 15 Jun '18

15 Jun '18

Hi *, running zypper dup to get the latest Tumbleweed snapshot I get: Warning: Digest verification failed for file 'ghc-base-4.11.1.0-1.1.x86_64.rpm' [/var/cache/zypp/packages/Haupt_Repository_OSS__Tumbleweed/x86_64/ghc-base-4.11.1.0-1.1.x86_64.rpm] expected 51a118143d31e24600907387eb24626c372a0dcc3851caea4d1102ef0311a1a5 but got 7a58d240a74d8f899d4feed23b26661a45b4b79f7aaa77c0d685abdf1d544c49 Accepting packages with wrong checksums can lead to a corrupted system and in extreme cases even to a system compromise. However if you made certain that the file with checksum '7a58..' is secure, correct and should be used within this operation, enter the first 4 characters of the checksum to unblock using this file on your own risk. Empty input will discard the file. This didn't solve in the last 12 hours. Is there a mirror with defect packages or is it a more generell problem? TIA. Bye. Michael. -- Michael Hirmke -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] TW : zypper dup today ghc-base & ghc-array
by ellanios82 15 Jun '18

15 Jun '18

TW : zypper dup : am getting warnings : "Unblock or discard? [d666/...? shows all options] (discard): Package ghc-array-0.5.2.0-1.1.x86_64 (Main Repository (OSS)) seems to be corrupted during transfer. Do you want to retry retrieval?" ..... tried retrieval which fails : anyone else seeing this prob? & what to do please ? thanks ....... -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] my internet connection is lost
by Constant Brouerius van Nidek 14 Jun '18

14 Jun '18

On my second computer which is in use by my wife I have done a complete new installation with a similar setup as my computer. Everything went fine for the first day but suddenly the computer lost its internet connection. I have used Parted Magic and found that it found and used my internet connection so I know that the internet connection works For something which always worked for me in the time I am using Suse (version 6) the only thing to do was entering Yast an go to Network settings Network is installed. What should I do to get the network connection working? The only difference between the two setups is that on my machine I am using Kmail with POP 3 and my wife is using Thunderbird with Imap. -- opensuse:tumbleweed:20180606 Qt: 5.11.0 KDE Frameworks: 5.46.0 - KDE Plasma: 5.12.5 - kwin 5.12.5 kmail2 5.8.1 - akonadiserver 5.8.1 - Kernel: 4.16.12-2-default -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 4

[opensuse-support] Updates in Tumbleweed Channel??
by Wayne Patton 13 Jun '18

13 Jun '18

I thought TW didn't distribute updates through the update channel. I am seeing libQt5Location5, libQt5Positioning5, libQt5PositioningQuick5 updates in the update channel today. Isn't this a bit unusual?? Wayne

2 1

[opensuse-support] A zypper dup anomaly ??
by Constant Brouerius van Nidek 13 Jun '18

13 Jun '18

For one of my computers after a electrical fallout I had to reinstall the Tumbleweed. I normally use the Net installment but this time I was not successful. Forgot the reason the program gave me. The last snapshot I had on a DVD was the 20180301 edition. In the past I had only good results with installation from an somewhat older version with a zypper dup update in order to get the latest. This time around I got following message: The following product is going to be downgraded: openSUSE Tumbleweed 20180606-0 ->20180301-0 x86_64 openSUSE-2180301-0 openSUSE The following package is going to change architecture: yast-storage-ng 4.0.183-1.1 ->4.0.110-1.1 x86_64 -> noarch openSUSE-20180301-) openSUSE 1469 packages to downgrade, 119 new, 1 to change arch. I was looking for an upgrade, not a big downgrade. Why is zypper dup wants me to substantially downgrade? -- opensuse:tumbleweed:20180606 Qt: 5.11.0 KDE Frameworks: 5.46.0 - KDE Plasma: 5.12.5 - kwin 5.12.5 kmail2 5.8.1 - akonadiserver 5.8.1 - Kernel: 4.16.12-2-default -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 3

[opensuse-support] Re: [opensuse-factory] mlocate
by ellanios82 11 Jun '18

11 Jun '18

On 09/06/18 15:15, Patrick Shanahan wrote on factory : > * mike <furryllama(a)comcast.net> [06-09-18 08:09]: >> >> On 06/09/2018 07:20 AM, Peter Suetterlin wrote: >>> mike wrote: >>>> Hi, >>>> >>>> I'm getting this after running updatedb - >>>> >>>> can not open a temporary file for >>>> '/var/lib/mlocate/mlocate.db' >>>> >>>> I've had to remove mlocate then reinstall it and the first updatedb >>>> runs fine, >>>> >>>> then I get the above error message for the second run.....is there a >>>> better fix >>>> >>>> for this? >>> Hmm, likely a permission issue. It normally runs as nobody (unless you change >>> that). Maybe the initial run when installing it is run as root? Then the DB >>> is owned by root and cannot be changed. Or did you call updatedb yourself? >> always run as root > show: ls -la /var/lib/mlocate > drwxr-xr-x 1 nobody root 20 Jun 9 00:15 . > drwxr-xr-x 1 root root 1006 Jun 8 23:30 .. > -rw-r--r-- 1 nobody nobody 16874246 Jun 9 00:15 mlocate.db > > - Thank you Patrick { i have been told bu board-member to ask TW probs on opensuse-support } with TW i have adjusted chown & chmod as you suggest , but continue to get : # updatedb updatedb: can not open a temporary file for `/var/lib/mlocate/mlocate.db' ...... - what to try next please? thanks regards .... -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 6

[opensuse-support] wicked, bridge tap
by Simon Becherer 11 Jun '18

11 Jun '18

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i trie to set up a tap / bridge network to connect kvm machines on tumbleweed. on opensuse 11.4 i have done something like: enp37s0 is set up to static address 192.168.0.21 (from system start) then as root: tunctl -u myuser brctl addbr bri0) brctl stp bri0 off ifconfig tap0 0.0.0.0 up brctl addif bri0 tap0 ifconfig enp37s0 0.0.0.0 up brctl addif bri0 enp37s0 ifconfig bri0 192.168.0.21 up ip link set tap0 up then my virtual machine was running fine in the net: qemu-kvm -enable-kvm -hda /home/kvm/images/suse10p1.img -no-reboot -usb -usbdevice tablet -localtime -net nic,macaddr=52-54-00-12-35-57,model=e1000 -net tap,ifname=tap0,downscript=no -m 1024 -cpu host -vga cirrus - -k de -monitor stdio ======================================= i tried in tumbleweed (and googeled, i have read man wicked man wicked-config and man wicked-ethtool ifcfg ifcfg-vlan) now i am completely confused: to find how i change the ifconfig line's to wicked trying simply: wicked ifup tap0 0.0.0.0 wicked: skipping tap0 interface: no configuration provided wicked: ifup: no matching interfaces i found nothing how i got / generate a config file who will work. on the old system there is also not an config file for bri0 or tap0 where did i get this config files or change the above commands to run? regards, simoN - -- www.becherer.de -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) iQIcBAEBAgAGBQJbHDEVAAoJEOuDxDCJWQG+jt0QANLo9SXy2MpYmM3/KpOqEhB+ LajLkIuOAUKq8mq7OkTLUA4suVzVvSaSwuF3aQU8Qo3QrOK0it6r+LBW69NCJeEo 2qhbjSczz5V5SPqcK2CwPAuFbZl3n1qJToT5GxWtA7w//YXFkxgrWWO3JY0hZbnk zqF1zUpvKD8vsDQRjs3Vkp+aqD975NjPg7b6Olh49e3m0vIO10PULC8sXi8qy75I SAL7Bx9RmbRc0k7YV7mwWxH3WR8AhC1Qu2/zHT/3w99RwUYQxOqifieUrWynq54m lrl0RxxQNuQNYc0bP3IW+S5SjEPVCGxR7l6NTeQzDK/ymPTqUX3t0NtNiUtdBJbK GcjqiLK8J5cu4+5bf2MrdlilOUl+3/qqFWWZ7KXBfapT4cCW8ADZL368XBHuV8ZR FDglNwT7h5/2sdqOKmtDZxMhK6b3hgUrDOHcNDHTwJhGHMW71WZcRSYaowPOxSO8 Pr8SdJIh5UAIJrhFumQqTIHALf8/nFMnK7+KFScp1PWM1nW/Gopn4XbsQrBA9gpo XACxMpmpHqKcsa6PbbRId8UfvR3IE3tLSQbg5cR+78/ZcWsnlSe6lJJ0dbHhH65B BV273EsRCNr0kV1I87+ZFaUnAhr912Gj0Vc0FD2sbtiHq6Jst9/Q8oCkM9nvJibm 2L5BhGvn7er4P221PSOW =CyvH -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 4

[opensuse-support] TW : LibreOffice Calc : Alt. key is not doing its stuff
by ellanios82 10 Jun '18

10 Jun '18

TW : since 3 or 4 weeks , LibreOffice Calc : - the Alt. key is not doing its stuff - Alt-fq doesn't close : - Alt. fu doesn't show recently opened files .... vers.: libreoffice-calc-6.0.4.2-2.1.x86_64 ........ Does anyone know if there is a fix ? : thanks ....... regards -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] X takes too much CPU when the screen of xfreerdp is heavily updated
by H Zeng 05 Jun '18

05 Jun '18

Hi there, I used xfreerdp to connect to a Windows 7 desktop to do some work. When the screen from that desktop has something to keep updating, such as the busily refreshed highlighting of elements in a 3D model, the X process in my openSUSE desktop takes full CPU time of a core. The options I used for `xfreerdp` are like these, ``` /rfx /jpeg-quality:60 /codec-cache:rfx /audio-mode:2 -wallpaper +clipboard +compression /size:1366x1024 /bpp:16 ``` And I am using KDE on Tumbleweed and all related packages are from OSS. Is that normal? Cheers, Zeng -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

4 6

[opensuse-support] Font fun
by Wolfgang Rosenauer 04 Jun '18

04 Jun '18

Hi, I'm pretty familiar with openSUSE and I can solve many issues when I install new versions. What I will never understand is font configuration though. Neither I do fully understand how to configure it nor the default seems sane. I've been using Leap 42.x now for its lifetime and upgraded to Leap 15.0 today just to see that some applications have very strange and ugly fonts (imagine fonts like from my the early days of PCs). Especially this was about monospace this time and I was able to change the configuration via YaST2's new module (btw, where does it apply the configuration? I couldn't find it in /etc/fonts.) But first I had to look up on my old installation (thank god it's still around in another partition) which font I've used for the past years. Therefore I was able to apply the same. Still my feedback somehow is: openSUSE's default font selection is inconsistent and strange/suboptimal in every other version or I do something wrong in a subtle way. Anyone has a useful pointer how to get nice fonts within openSUSE Leap 15.0? Thanks, Wolfgang -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

6 8