October 2018 - openSUSE Support - openSUSE Mailing Lists

[opensuse-support] wifi and eth wicked same network should fallback - bond?
by Simon Becherer 08 Oct '18

08 Oct '18

Hi, i try the whole day to get a laptop tumbleweed kde, xwindows, wicked running with wifi and cable lan, static ipv4 only. network is 192.168.0.x cable: enp3s0 should be 192.168.0.23 wifi: wlp2s0 should be 192.168.0.43 (driver is iwlwifi) most of time this laptop is connected to the eth0 sometimes if it is not connected, it should use wifi to go into the same network (and to go only in this network). so i decided to configure both networks inside yast i get it running with cable, and i get it running with wifi, BUT if i activate both together inside yast, it will mess up. the reason seems to be the routing. if i do NOT assign enp3s0 or wlp2s0 "-" inside yast, ip ro will show no routing at all. if insert one of them, it will partly work as long as this connection is ok. i tried to add a second routing with: ip route delete default ip route add default via 192.168.0.99 metric 101 dev wlp2s0 ip route add default via 192.168.0.99 metric 102 dev enp3s0 but still the same problem. then i was thinking try to bond both networkadapters together: in yast i made a bond0 gave theme the address 192.168.0.23 and put both network adapters to the bond0 (removed the ip addresses and they jump to "activate by hotplugged" and made standartroute to bond0 as soon as i say ok in yast it takes some seconds to write the configuration, and after this (if before both adapters where visible inside the network) the wifi adapter will switched off, never seen by ip ro (and of course also not inside the net) i checked also: rfkill list (to make shure its not blocked) all are on "no" inside /etc/sysconfig/network/ifcfg-bon0 both slaves are inside, and the ifcfg-wlp2s0 file only differs from standalone to the bond version in BOOTPROTO and STARTMODE and as i have read inside internet, thats correct. could anybody help me to get it running like: fallback from one to the other network adapters, normally using enp3s0 if not present using wlp2s0 i do not take care how to get to this. i have had it running with opensuse 42.2? i think was before on that laptop. as i remember there it was networkmanager. but if i now switch inside yast to networkmanager, i have no possibility to change anything inside yast at enp3s0 or bond0 or wlp2s0 and network is not present at all. simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 5

[opensuse-support] give TW Grub-EFI menu blue background instead of black?
by Felix Miata 07 Oct '18

07 Oct '18

This is what I had: http://fm.no-ip.com/SS/Suse/gmenu-TWsmall.jpg (menu uses <1/2 the screen) when I filed https://bugzilla.opensuse.org/show_bug.cgi?id=1101747 This is what I have now, which eventually resulted from removing grub* packages and config files, then reinstalling: http://fm.no-ip.com/SS/Suse/gmenu-TWbig.jpg (menu uses most of screen) This is what I'm trying to achieve (blue background, like Debian produces): http://fm.no-ip.com/SS/Suse/gmenu-Deb.jpg I tried YaST2, but it doesn't seem to have any way to affect menu colors (or font size or overall menu size). <https://doc.opensuse.org/documentation/leap/reference/html/book.opensuse.re…> didn't help. Debian has a file /etc/grub.d/05_debian_theme which undoubtedly accounts for its boot menu colors. I tried including it in my TW /etc/grub.d/, but it didn't have any desired effect, likely at least in part because of its many references to *grub/* where openSUSE has *grub2/*. I tried to find docs on the installed system that might explain grub menu theming, but no luck there: # rpm -qa | grep grub grub2-2.02-33.1.x86_64 grub2-i386-pc-2.02-33.1.x86_64 grub2-x86_64-efi-2.02-33.1.x86_64 ruby2.5-rubygem-cfa_grub2-1.0.1-1.1.x86_64 # man grub.cfg No manual entry for grub.cfg # man grub No manual entry for grub # man grub2 No manual entry for grub2 # man grub2-i386-pc No manual entry for grub2-i386-pc # man grub2-x86_64-efi No manual entry for grub2-x86_64-efi # grub If 'grub' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf grub # grub2 If 'grub' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf grub2 Anyone know how to make my openSUSE TW Grub menu colors match Debian's, or where docs are that might explain? Bonus question: What controls overall Grub menu size, whether it uses only a small portion of the center of the screen instead of most of it? I looked in /etc/grub.d/, /etc/default/grub and /boot/grub2/grub.cfg without spotting anything that looked like any kind of size control. -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

2 5

[opensuse-support] TW20180928 wickedd-dhcp#.services running in fixed IP configuration
by Felix Miata 04 Oct '18

04 Oct '18

host big31: # cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='static' STARTMODE='auto' IPADDR='192.168.... # systemd-analyze blame ... 5.548s wickedd-auto4.service 5.546s wickedd-dhcp4.service 5.546s wickedd-dhcp6.service ... Why are these services running? Why doesn't 'systemctl disable wickedd-dhcp6.service' prevent wickedd-dhcp6.service from starting on next boot? -- "Wisdom is supreme; therefore get wisdom. Whatever else you get, get wisdom." Proverbs 4:7 (New Living Translation) Team OS/2 ** Reg. Linux User #211409 ** a11y rocks! Felix Miata *** http://fm.no-ip.com/ -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

1 0

[opensuse-support] Re: [opensuse] Tumbleweed : Console Large Font
by ellanios82 02 Oct '18

02 Oct '18

On 16/06/2016 22:47, Greg Freemyer wrote: > > Post boot I sometimes use this to enlarge the console font: > > setfont /usr/share/kbd/consolefonts/iso01-12×22.psfu.gz > > Greg > . > - on kind suggestion of Greg , have been using iso01-12×22.psfu.gz - any ideas please : where to download a Larger Font ? thanks .... -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

7 17

[opensuse-support] codepage when ssh
by Simon Becherer 02 Oct '18

02 Oct '18

Hi, have a problem with the code-page at a ssh connection: i googled about codepages and ssh connectons, but found nothing useful for my situation: real computer: opensuse tumbleweed virtual computer: opensuse 10.1 doing a ssh fom real to virtual now inside the console i type ° (degree) and it appears at screen correct. now starting a closed source application from this console (that's the reasoned for this virtual opensuse10.1) now when i type special chars like ° (degrees) i get 2 keys, not one as i should. in past, ssh from opensuse 11.4 to 10.1 it was working fine with the correct keys. and its working fine, if i log directly inside the virtual machine, (kde) and start the closed surce there. so i guess, it must have something to do with the ssh connection. how could i modify the ssh command (or doing something else) to have the correct codepage there? (must i maybe change codepage after logging in before start the application? - that would wonder me, because in past i never did something like this.) (and how to see what codepage is used in suse 10.1?) thanks, simoN -- www.becherer.de -- To unsubscribe, e-mail: opensuse-support+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-support+owner(a)opensuse.org

3 5