[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.3-1 (builder@nereid-builder) (gcc version 4.4.2 20091026 (release) (PLD-Linux) ) #1 SMP Thu Jan 7 09:35:42 CET 2010 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bde0000 (usable) [ 0.000000] BIOS-e820: 000000007bde0000 - 000000007bde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bde3000 - 000000007bdf0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bdf0000 - 000000007be00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x7bde0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 base 0060000000 mask FFF0000000 write-back [ 0.000000] 3 base 0070000000 mask FFF8000000 write-back [ 0.000000] 4 base 0078000000 mask FFFC000000 write-back [ 0.000000] 5 base 007BE00000 mask FFFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007bde0000 (usable) [ 0.000000] modified: 000000007bde0000 - 000000007bde3000 (ACPI NVS) [ 0.000000] modified: 000000007bde3000 - 000000007bdf0000 (ACPI data) [ 0.000000] modified: 000000007bdf0000 - 000000007be00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 100000-106000 [ 0.000000] RAMDISK: 00de3000 - 00efffee [ 0.000000] ACPI: RSDP 000f7040 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 7bde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 7bde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 7bde30c0 042A0 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 7bde0000 00040 [ 0.000000] ACPI: SSDT 7bde7440 00248 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 7bde76c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 7bde7700 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 7bde7380 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1097MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00102000 - 00108e80 [ 0.000000] (11 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000002000 - 0000006000] V86 mode memory ==> [0000002000 - 0000006000] [ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #4 [0001000000 - 000165a6e4] TEXT DATA BSS ==> [0001000000 - 000165a6e4] [ 0.000000] #5 [0000de3000 - 0000efffee] RAMDISK ==> [0000de3000 - 0000efffee] [ 0.000000] #6 [0000007000 - 000009f800] V86 mode memory ==> [0000007000 - 000009f800] [ 0.000000] #7 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #8 [000165b000 - 00016620fe] BRK ==> [000165b000 - 00016620fe] [ 0.000000] #9 [0000100000 - 0000102000] PGTABLE ==> [0000100000 - 0000102000] [ 0.000000] #10 [0000102000 - 0000109000] BOOTMAP ==> [0000102000 - 0000109000] [ 0.000000] found SMP MP-table at [c00f5630] f5630 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007bde0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007bde0 [ 0.000000] On node 0 totalpages: 507263 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2196 pages used for memmap [ 0.000000] HighMem zone: 278862 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 7be00000 (gap: 7be00000:64200000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @c2800000 s22104 r0 d22952 u1048576 [ 0.000000] pcpu-alloc: s22104 r0 d22952 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503299 [ 0.000000] Kernel command line: auto BOOT_IMAGE=pld_th root=907 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:0007bde0) [ 0.000000] Memory: 2002544k/2029440k available (4896k kernel code, 25320k reserved, 512k data, 456k init, 1124232k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc1549000 - 0xc15bb000 ( 456 kB) [ 0.000000] .data : 0xc14c8000 - 0xc1548108 ( 512 kB) [ 0.000000] .text : 0xc1000000 - 0xc14c8000 (4896 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 10158080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2311.307 MHz processor. [ 0.006672] Calibrating delay loop (skipped), value calculated using timer frequency.. 4624.22 BogoMIPS (lpj=7704356) [ 0.006759] Security Framework initialized [ 0.006799] SELinux: Disabled at boot. [ 0.006840] Mount-cache hash table entries: 512 [ 0.007025] Initializing cgroup subsys ns [ 0.007061] Initializing cgroup subsys cpuacct [ 0.007098] Initializing cgroup subsys memory [ 0.007136] Initializing cgroup subsys devices [ 0.007171] Initializing cgroup subsys freezer [ 0.007206] Initializing cgroup subsys net_cls [ 0.007254] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.007290] CPU: L2 Cache: 512K (64 bytes/line) [ 0.007324] CPU: Physical Processor ID: 0 [ 0.007358] CPU: Processor Core ID: 0 [ 0.007393] mce: CPU supports 5 MCE banks [ 0.007435] using C1E aware idle routine [ 0.007473] Performance Events: AMD PMU driver. [ 0.007540] ... version: 0 [ 0.007575] ... bit width: 48 [ 0.007609] ... generic registers: 4 [ 0.007644] ... value mask: 0000ffffffffffff [ 0.007679] ... max period: 00007fffffffffff [ 0.007713] ... fixed-purpose events: 0 [ 0.007748] ... event mask: 000000000000000f [ 0.007786] Checking 'hlt' instruction... OK. [ 0.020421] ACPI: Core revision 20090903 [ 0.027238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.061619] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 [ 0.063333] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.009999] Initializing CPU#1 [ 0.009999] Calibrating delay using timer specific routine.. 4624.57 BogoMIPS (lpj=7704926) [ 0.009999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.009999] CPU: L2 Cache: 512K (64 bytes/line) [ 0.009999] CPU: Physical Processor ID: 0 [ 0.009999] CPU: Processor Core ID: 1 [ 0.153446] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 [ 0.153763] Brought up 2 CPUs [ 0.153798] Total of 2 processors activated (9249.80 BogoMIPS). [ 0.154132] devtmpfs: initialized [ 0.154226] regulator: core version 0.5 [ 0.154226] NET: Registered protocol family 16 [ 0.154226] EISA bus registered [ 0.154226] ACPI: bus type pci registered [ 0.154226] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.154226] PCI: MCFG area at e0000000 reserved in E820 [ 0.154226] PCI: Using MMCONFIG for extended config space [ 0.154226] PCI: Using configuration type 1 for base access [ 0.156716] bio: create slab at 0 [ 0.157062] ACPI: EC: Look up EC in DSDT [ 0.164762] ACPI: Interpreter enabled [ 0.164809] ACPI: (supports S0 S3 S4 S5) [ 0.164982] ACPI: Using IOAPIC for interrupt routing [ 0.170282] ACPI: No dock devices found. [ 0.170282] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.170326] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.170326] pci 0000:00:06.0: PME# disabled [ 0.170326] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.170326] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.170326] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.170326] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.170326] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.170326] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.170326] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.170339] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.170409] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.170459] pci 0000:00:12.2: supports D1 D2 [ 0.170461] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.170499] pci 0000:00:12.2: PME# disabled [ 0.170562] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.170615] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.170689] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.170740] pci 0000:00:13.2: supports D1 D2 [ 0.170742] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.170779] pci 0000:00:13.2: PME# disabled [ 0.170925] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.170931] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.170938] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.170945] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.170951] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.171016] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 0.171058] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.171095] pci 0000:00:14.2: PME# disabled [ 0.171233] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] [ 0.171353] pci 0000:01:05.0: reg 10 64bit mmio pref: [0xf8000000-0xfbffffff] [ 0.171358] pci 0000:01:05.0: reg 18 64bit mmio: [0xfdfe0000-0xfdfeffff] [ 0.171362] pci 0000:01:05.0: reg 20 io port: [0xee00-0xeeff] [ 0.171366] pci 0000:01:05.0: reg 24 32bit mmio: [0xfde00000-0xfdefffff] [ 0.171376] pci 0000:01:05.0: supports D1 D2 [ 0.171393] pci 0000:01:05.2: reg 10 64bit mmio: [0xfdffc000-0xfdffffff] [ 0.171423] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.171426] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdffffff] [ 0.171429] pci 0000:00:01.0: bridge 64bit mmio pref: [0xf8000000-0xfbffffff] [ 0.171463] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff] [ 0.171478] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdaff000-0xfdafffff] [ 0.171488] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdaf8000-0xfdafbfff] [ 0.171495] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.171523] pci 0000:02:00.0: supports D1 D2 [ 0.171525] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.173337] pci 0000:02:00.0: PME# disabled [ 0.173427] pci 0000:00:06.0: bridge io port: [0xd000-0xdfff] [ 0.173430] pci 0000:00:06.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.173434] pci 0000:00:06.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.173489] pci 0000:00:14.4: transparent bridge [ 0.173526] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] [ 0.173531] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.173535] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.173546] pci_bus 0000:00: on NUMA node 0 [ 0.173550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.173806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.173888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.173942] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.193469] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.193845] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.194281] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.194715] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.195151] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.195589] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.196027] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.196872] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.197277] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.197277] vgaarb: loaded [ 0.197277] PCI: Using ACPI for IRQ routing [ 0.197277] NetLabel: Initializing [ 0.197277] NetLabel: domain hash size = 128 [ 0.197277] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.197277] NetLabel: unlabeled traffic allowed by default [ 0.197277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.197277] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.203359] hpet: hpet2 irq 24 for MSI [ 0.203381] Switching to clocksource hpet [ 0.204461] pnp: PnP ACPI init [ 0.204516] ACPI: bus type pnp registered [ 0.207765] pnp: PnP ACPI: found 13 devices [ 0.207801] ACPI: ACPI bus type pnp unregistered [ 0.207837] PnPBIOS: Disabled by ACPI PNP [ 0.207880] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.207916] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.207952] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.207991] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.208027] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.208063] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.208099] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.208136] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.208171] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.208207] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.208243] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.208279] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.208315] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.208351] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.208387] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.208423] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.208459] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.208495] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.208531] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.208567] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.208608] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.208647] system 00:0c: iomem range 0xd1c00-0xd3fff has been reserved [ 0.208683] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 0.208719] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 0.208756] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.208792] system 00:0c: iomem range 0x7bde0000-0x7bdfffff could not be reserved [ 0.208832] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.208868] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.208904] system 00:0c: iomem range 0x100000-0x7bddffff could not be reserved [ 0.208944] system 00:0c: iomem range 0x7bef0000-0x7feeffff could not be reserved [ 0.208983] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.209023] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.209059] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.244306] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.244343] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.244380] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdffffff [ 0.244416] pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff [ 0.244459] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.244495] pci 0000:00:06.0: IO window: 0xd000-0xdfff [ 0.244532] pci 0000:00:06.0: MEM window: 0xfdd00000-0xfddfffff [ 0.244568] pci 0000:00:06.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.244608] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.244645] pci 0000:00:14.4: IO window: 0xc000-0xcfff [ 0.244683] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff [ 0.244721] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff [ 0.244767] pci 0000:00:06.0: setting latency timer to 64 [ 0.244774] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.244777] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.244779] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.244782] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdffffff] [ 0.244785] pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xfbffffff] [ 0.244787] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.244790] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.244792] pci_bus 0000:02: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.244795] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.244797] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.244799] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.244802] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.244804] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.244817] NET: Registered protocol family 2 [ 0.244888] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.245051] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.245668] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.245999] TCP: Hash tables configured (established 131072 bind 65536) [ 0.246036] TCP reno registered [ 0.246136] NET: Registered protocol family 1 [ 0.356723] pci 0000:01:05.0: Boot video device [ 0.356792] Trying to unpack rootfs image as initramfs... [ 0.357530] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 0.358856] Freeing initrd memory: 1139k freed [ 0.360329] Scanning for low memory corruption every 60 seconds [ 0.360613] audit: initializing netlink socket (disabled) [ 0.360658] type=2000 audit(1264953253.360:1): initialized [ 0.366325] highmem bounce pool size: 64 pages [ 0.366364] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.372141] VFS: Disk quotas dquot_6.5.2 [ 0.372241] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.372377] ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.372472] msgmni has been set to 1719 [ 0.372770] alg: No test for stdrng (krng) [ 0.372907] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.372947] io scheduler noop registered [ 0.372981] io scheduler anticipatory registered [ 0.373015] io scheduler deadline registered [ 0.373161] io scheduler cfq registered (default) [ 0.373385] alloc irq_desc for 25 on node -1 [ 0.373388] alloc kstat_irqs on node -1 [ 0.373395] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X [ 0.373400] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.374012] isapnp: Scanning for PnP cards... [ 0.730506] isapnp: No Plug & Play device found [ 0.773929] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.026810] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.027688] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.030033] brd: module loaded [ 1.030139] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.030283] Fixed MDIO Bus: probed [ 1.030496] PNP: No PS/2 controller found. Probing ports directly. [ 1.064764] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.064804] If AUX port is really absent please use the 'i8042.noaux' option. [ 1.313450] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.313809] mice: PS/2 mouse device common for all mice [ 1.313895] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 1.313965] rtc_cmos 00:05: RTC can wake from S4 [ 1.314087] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.314155] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.314328] EISA: Probing bus 0 at eisa.0 [ 1.314378] Cannot allocate resource for EISA slot 4 [ 1.314428] EISA: Detected 0 cards. [ 1.314464] cpuidle: using governor ladder [ 1.314498] cpuidle: using governor menu [ 1.314713] TCP cubic registered [ 1.315098] NET: Registered protocol family 10 [ 1.315504] lo: Disabled Privacy Extensions [ 1.315571] Mobile IPv6 [ 1.315606] NET: Registered protocol family 17 [ 1.315699] Using IPI No-Shortcut mode [ 1.315967] TuxOnIce: Ignoring late initcall, as requested. [ 1.316013] registered taskstats version 1 [ 1.316108] No TPM chip found, activating TPM-bypass! [ 1.316516] rtc_cmos 00:05: setting system clock to 2010-01-31 15:54:14 UTC (1264953254) [ 1.316586] Initalizing network drop monitor service [ 1.370169] RAMDISK: gzip image found at block 0 [ 1.401312] VFS: Mounted root (romfs filesystem) readonly on device 1:0. [ 1.412150] md: raid10 personality registered for level 10 [ 1.427000] SCSI subsystem initialized [ 1.444040] libata version 3.00 loaded. [ 1.469804] ahci 0000:00:11.0: version 3.0 [ 1.469823] alloc irq_desc for 22 on node -1 [ 1.469825] alloc kstat_irqs on node -1 [ 1.469836] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.469996] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.470046] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.470506] scsi0 : ahci [ 1.470883] scsi1 : ahci [ 1.471058] scsi2 : ahci [ 1.471231] scsi3 : ahci [ 1.471467] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 1.471508] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.472296] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.472337] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.790098] ata4: SATA link down (SStatus 0 SControl 300) [ 1.950039] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.950096] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.950150] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.950343] ata3.00: ATAPI: ATAPI iHAS120 6, 7L0E, max UDMA/100 [ 1.951019] ata3.00: configured for UDMA/100 [ 1.956600] ata1.00: ATA-7: SAMSUNG HD252HJ, 1AC01118, max UDMA7 [ 1.956637] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.958188] ata2.00: ATA-7: WDC WD2500AAKS-00SBA0, 12.01B01, max UDMA/133 [ 1.958225] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.959138] ata2.00: configured for UDMA/133 [ 1.963185] ata1.00: configured for UDMA/133 [ 1.973454] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD252HJ 1AC0 PQ: 0 ANSI: 5 [ 1.973919] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.974031] scsi 1:0:0:0: Direct-Access ATA WDC WD2500AAKS-0 12.0 PQ: 0 ANSI: 5 [ 1.974155] sd 0:0:0:0: [sda] Write Protect is off [ 1.974192] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.974241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.974331] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.974403] sd 1:0:0:0: [sdb] Write Protect is off [ 1.974439] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.974457] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.974625] sdb: [ 1.974774] sda: [ 1.975507] scsi 2:0:0:0: CD-ROM ATAPI iHAS120 6 7L0E PQ: 0 ANSI: 5 [ 1.978148] sdb1 sdb2 sdb3 sdb4 < sdb5 sda1 sda2 sda3 sda4 < sdb6 sda5 sdb7 sda6 sda7 sdb8 > [ 2.038690] sda8 > [ 2.060584] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.062562] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.162545] md: md7 stopped. [ 2.225964] md: bind [ 2.226189] raid10: raid set md7 active with 1 out of 2 devices [ 2.237950] md7: bitmap initialized from disk: read 8/8 pages, set 39 bits [ 2.237987] created bitmap (125 pages) for device md7 [ 2.252388] md7: detected capacity change from 0 to 67027599360 [ 2.260281] md7: unknown partition table [ 2.274469] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.274505] EXT3-fs: write access will be enabled during recovery. [ 2.354902] kjournald starting. Commit interval 5 seconds [ 2.354950] EXT3-fs: recovery complete. [ 2.355251] EXT3-fs: mounted filesystem with writeback data mode. [ 2.355301] VFS: Mounted root (ext3 filesystem) readonly on device 9:7. [ 2.355337] Trying to move old root to /initrd ... okay [ 2.383501] Freeing unused kernel memory: 456k freed [ 5.152594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 5.152602] ACPI: Power Button [PWRB] [ 5.152680] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 5.152684] ACPI: Power Button [PWRF] [ 5.259215] processor LNXCPU:00: registered as cooling_device0 [ 5.259445] processor LNXCPU:01: registered as cooling_device1 [ 5.278834] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.278888] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 5.278937] scsi 2:0:0:0: Attached scsi generic sg2 type 5 [ 5.367786] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 5.367791] Uniform CD-ROM driver Revision: 3.20 [ 5.367922] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 5.432061] IT8718 SuperIO detected. [ 5.432448] parport_pc 00:0a: reported by Plug and Play ACPI [ 5.432551] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 5.473237] Floppy drive(s): fd0 is 1.44M [ 5.491482] FDC 0 is a post-1991 82077 [ 5.536298] usbcore: registered new interface driver usbfs [ 5.536530] usbcore: registered new interface driver hub [ 5.536657] usbcore: registered new device driver usb [ 5.577068] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.642579] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.653429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.653464] alloc irq_desc for 17 on node -1 [ 5.653466] alloc kstat_irqs on node -1 [ 5.653478] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.653500] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 5.653535] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 5.653575] ehci_hcd 0000:00:12.2: debug port 1 [ 5.653608] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 5.669962] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 5.669995] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.669998] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.670000] usb usb1: Product: EHCI Host Controller [ 5.670032] usb usb1: Manufacturer: Linux 2.6.32.3-1 ehci_hcd [ 5.670034] usb usb1: SerialNumber: 0000:00:12.2 [ 5.670216] usb usb1: configuration #1 chosen from 1 choice [ 5.670254] hub 1-0:1.0: USB hub found [ 5.670267] hub 1-0:1.0: 6 ports detected [ 5.670361] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.670539] alloc irq_desc for 19 on node -1 [ 5.670541] alloc kstat_irqs on node -1 [ 5.670553] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.670591] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 5.670613] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 5.670649] ehci_hcd 0000:00:13.2: debug port 1 [ 5.670682] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 5.675900] Linux agpgart interface v0.103 [ 5.680032] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 5.680062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.680065] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.680067] usb usb2: Product: EHCI Host Controller [ 5.680069] usb usb2: Manufacturer: Linux 2.6.32.3-1 ehci_hcd [ 5.680071] usb usb2: SerialNumber: 0000:00:13.2 [ 5.680231] usb usb2: configuration #1 chosen from 1 choice [ 5.680266] hub 2-0:1.0: USB hub found [ 5.680275] hub 2-0:1.0: 6 ports detected [ 5.683206] ppdev: user-space parallel port driver [ 5.692994] alloc irq_desc for 16 on node -1 [ 5.692998] alloc kstat_irqs on node -1 [ 5.693009] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.693132] scsi4 : pata_atiixp [ 5.693205] scsi5 : pata_atiixp [ 5.694250] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 5.694253] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 5.736617] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.920001] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.021959] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input3 [ 6.024924] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 6.025184] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.025233] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 6.025249] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 6.025280] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 6.025287] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.081138] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.081142] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.081145] usb usb3: Product: OHCI Host Controller [ 6.081147] usb usb3: Manufacturer: Linux 2.6.32.3-1 ohci_hcd [ 6.081149] usb usb3: SerialNumber: 0000:00:12.0 [ 6.081318] usb usb3: configuration #1 chosen from 1 choice [ 6.081355] hub 3-0:1.0: USB hub found [ 6.081366] hub 3-0:1.0: 3 ports detected [ 6.081467] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.081508] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 6.081518] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 6.081541] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 6.123647] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.123668] alloc irq_desc for 18 on node -1 [ 6.123670] alloc kstat_irqs on node -1 [ 6.123681] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.123721] r8169 0000:02:00.0: setting latency timer to 64 [ 6.123754] alloc irq_desc for 26 on node -1 [ 6.123755] alloc kstat_irqs on node -1 [ 6.123766] r8169 0000:02:00.0: irq 26 for MSI/MSI-X [ 6.124012] eth0: RTL8168d/8111d at 0xf828e000, 6c:f0:49:11:ba:e6, XID 083000c0 IRQ 26 [ 6.137802] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.137806] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.137809] usb usb4: Product: OHCI Host Controller [ 6.137811] usb usb4: Manufacturer: Linux 2.6.32.3-1 ohci_hcd [ 6.137813] usb usb4: SerialNumber: 0000:00:12.1 [ 6.138040] usb usb4: configuration #1 chosen from 1 choice [ 6.138098] hub 4-0:1.0: USB hub found [ 6.138110] hub 4-0:1.0: 3 ports detected [ 6.138229] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.138273] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 6.138284] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 6.138323] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 6.176147] Uniform Multi-Platform E-IDE driver [ 6.194468] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.194472] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.194475] usb usb5: Product: OHCI Host Controller [ 6.194477] usb usb5: Manufacturer: Linux 2.6.32.3-1 ohci_hcd [ 6.194478] usb usb5: SerialNumber: 0000:00:13.0 [ 6.194636] usb usb5: configuration #1 chosen from 1 choice [ 6.194671] hub 5-0:1.0: USB hub found [ 6.194682] hub 5-0:1.0: 3 ports detected [ 6.195068] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.195103] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 6.195114] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 6.195138] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 6.250734] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.250739] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.250742] usb usb6: Product: OHCI Host Controller [ 6.250743] usb usb6: Manufacturer: Linux 2.6.32.3-1 ohci_hcd [ 6.250745] usb usb6: SerialNumber: 0000:00:13.1 [ 6.250914] usb usb6: configuration #1 chosen from 1 choice [ 6.250947] hub 6-0:1.0: USB hub found [ 6.250959] hub 6-0:1.0: 3 ports detected [ 6.251222] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.251260] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 6.251271] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 6.251295] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 6.307399] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.307403] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.307405] usb usb7: Product: OHCI Host Controller [ 6.307407] usb usb7: Manufacturer: Linux 2.6.32.3-1 ohci_hcd [ 6.307409] usb usb7: SerialNumber: 0000:00:14.5 [ 6.307601] usb usb7: configuration #1 chosen from 1 choice [ 6.307638] hub 7-0:1.0: USB hub found [ 6.307650] hub 7-0:1.0: 2 ports detected [ 7.348866] EXT3 FS on md7, internal journal [ 7.555669] device-mapper: uevent: version 1.0.3 [ 7.555912] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 7.640294] fuse init (API version 7.13) [ 7.679620] md: md1 stopped. [ 7.755169] md: bind [ 7.756846] raid10: raid set md1 active with 1 out of 2 devices [ 7.763369] md1: bitmap initialized from disk: read 4/4 pages, set 0 bits [ 7.763371] created bitmap (61 pages) for device md1 [ 7.777323] md1: detected capacity change from 0 to 509739008 [ 7.777780] md: md2 stopped. [ 7.785221] md: bind [ 7.787375] raid10: raid set md2 active with 1 out of 2 devices [ 7.813441] md2: bitmap initialized from disk: read 15/15 pages, set 2434 bits [ 7.813444] created bitmap (239 pages) for device md2 [ 7.844723] md2: detected capacity change from 0 to 1998585856 [ 7.845205] md: md5 stopped. [ 7.852030] md: bind [ 7.854619] raid10: raid set md5 active with 1 out of 2 devices [ 7.887884] md5: bitmap initialized from disk: read 15/15 pages, set 1086 bits [ 7.887887] created bitmap (224 pages) for device md5 [ 7.905453] md5: detected capacity change from 0 to 60003319808 [ 7.905953] md: md6 stopped. [ 7.911774] md: bind [ 7.913818] raid10: raid set md6 active with 1 out of 2 devices [ 7.936893] md6: bitmap initialized from disk: read 15/15 pages, set 155 bits [ 7.936897] created bitmap (224 pages) for device md6 [ 7.947368] md6: detected capacity change from 0 to 60003319808 [ 7.947857] md: md8 stopped. [ 7.953721] md: bind [ 7.968238] md: raid1 personality registered for level 1 [ 7.968472] raid1: raid set md8 active with 1 out of 2 mirrors [ 7.974370] md8: bitmap initialized from disk: read 4/4 pages, set 2 bits [ 7.974372] created bitmap (61 pages) for device md8 [ 7.998652] md8: detected capacity change from 0 to 509804544 [ 8.009432] md8: unknown partition table [ 8.242148] md6: unknown partition table [ 8.859313] kjournald starting. Commit interval 5 seconds [ 9.345446] EXT3 FS on md8, internal journal [ 9.345451] EXT3-fs: mounted filesystem with writeback data mode. [ 9.411504] kjournald starting. Commit interval 5 seconds [ 9.444789] EXT3 FS on md6, internal journal [ 9.444793] EXT3-fs: mounted filesystem with writeback data mode. [ 9.892850] md1: unknown partition table [ 9.927862] Adding 497784k swap on /dev/md1. Priority:-1 extents:1 across:497784k [ 9.927914] md2: unknown partition table [ 9.948914] Adding 1951736k swap on /dev/md2. Priority:-2 extents:1 across:1951736k [ 10.589938] r8169: eth0: link up [ 10.589944] r8169: eth0: link up [ 15.824605] md5: unknown partition table [ 21.453530] eth0: no IPv6 routers present [ 83.667494] md: export_rdev(sdb8) [ 83.711254] md: bind [ 83.732655] RAID1 conf printout: [ 83.732660] --- wd:1 rd:2 [ 83.732663] disk 0, wo:0, o:1, dev:sda8 [ 83.732666] disk 1, wo:1, o:1, dev:sdb8 [ 83.733023] md: recovery of RAID array md8 [ 83.733026] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 83.733029] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 83.733033] md: using 128k window, over a total of 497856 blocks. [ 88.215499] md: export_rdev(sdb6) [ 88.343739] md: bind [ 88.496380] RAID10 conf printout: [ 88.496383] --- wd:1 rd:2 [ 88.496387] disk 0, wo:1, o:1, dev:sdb6 [ 88.496389] disk 1, wo:0, o:1, dev:sda6 [ 88.496935] md: delaying recovery of md6 until md8 has finished (they share one or more physical units) [ 92.710753] md: export_rdev(sdb5) [ 92.777278] md: bind [ 92.849121] RAID10 conf printout: [ 92.849125] --- wd:1 rd:2 [ 92.849128] disk 0, wo:1, o:1, dev:sdb5 [ 92.849131] disk 1, wo:0, o:1, dev:sda5 [ 92.849266] md: delaying recovery of md5 until md8 has finished (they share one or more physical units) [ 96.626979] md: export_rdev(sdb2) [ 96.795334] md: bind [ 96.953612] RAID10 conf printout: [ 96.953616] --- wd:1 rd:2 [ 96.953620] disk 0, wo:1, o:1, dev:sdb2 [ 96.953622] disk 1, wo:0, o:1, dev:sda2 [ 96.953925] md: delaying recovery of md2 until md8 has finished (they share one or more physical units) [ 99.573650] md: export_rdev(sdb1) [ 99.728471] md: bind [ 99.894929] RAID10 conf printout: [ 99.894933] --- wd:1 rd:2 [ 99.894936] disk 0, wo:1, o:1, dev:sdb1 [ 99.894939] disk 1, wo:0, o:1, dev:sda1 [ 99.895087] md: delaying recovery of md1 until md8 has finished (they share one or more physical units) [ 103.195292] md: export_rdev(sdb7) [ 103.233367] md: bind [ 103.249172] RAID10 conf printout: [ 103.249177] --- wd:1 rd:2 [ 103.249180] disk 0, wo:0, o:1, dev:sda7 [ 103.249182] disk 1, wo:1, o:1, dev:sdb7 [ 103.250208] md: delaying recovery of md7 until md8 has finished (they share one or more physical units) [ 106.379402] md: md8: recovery done. [ 106.458787] md: delaying recovery of md7 until md6 has finished (they share one or more physical units) [ 106.458792] md: delaying recovery of md2 until md6 has finished (they share one or more physical units) [ 106.458806] md: delaying recovery of md5 until md6 has finished (they share one or more physical units) [ 106.458811] md: delaying recovery of md1 until md6 has finished (they share one or more physical units) [ 106.458814] md: delaying recovery of md2 until md6 has finished (they share one or more physical units) [ 106.458826] md: delaying recovery of md6 until md2 has finished (they share one or more physical units) [ 106.458830] md: delaying recovery of md1 until md2 has finished (they share one or more physical units) [ 106.458835] md: delaying recovery of md5 until md6 has finished (they share one or more physical units) [ 106.458839] md: delaying recovery of md7 until md2 has finished (they share one or more physical units) [ 106.458851] md: delaying recovery of md2 until md1 has finished (they share one or more physical units) [ 106.458855] md: delaying recovery of md7 until md1 has finished (they share one or more physical units) [ 106.458865] md: delaying recovery of md1 until md7 has finished (they share one or more physical units) [ 106.458871] md: recovery of RAID array md7 [ 106.458872] md: delaying recovery of md6 until md2 has finished (they share one or more physical units) [ 106.458876] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 106.458878] md: delaying recovery of md5 until md6 has finished (they share one or more physical units) [ 106.458882] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 106.458884] md: delaying recovery of md2 until md1 has finished (they share one or more physical units) [ 106.458890] md: using 128k window, over a total of 65456640 blocks. [ 107.247223] RAID1 conf printout: [ 107.247226] --- wd:2 rd:2 [ 107.247230] disk 0, wo:0, o:1, dev:sda8 [ 107.247232] disk 1, wo:0, o:1, dev:sdb8 [ 379.761339] UDF-fs: Partition marked readonly; forcing readonly mount [ 379.791699] UDF-fs INFO UDF: Mounting volume 'WINDOWS 7 PL ALL RTM', timestamp 2009/08/30 13:04 (103c) [ 1765.092656] md: md7: recovery done. [ 1765.995205] md: delaying recovery of md2 until md1 has finished (they share one or more physical units) [ 1765.995211] md: delaying recovery of md5 until md6 has finished (they share one or more physical units) [ 1765.995215] md: delaying recovery of md6 until md2 has finished (they share one or more physical units) [ 1765.995221] md: recovery of RAID array md1 [ 1765.995223] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 1765.995225] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 1765.995229] md: using 128k window, over a total of 497792 blocks. [ 1766.115296] RAID10 conf printout: [ 1766.115300] --- wd:2 rd:2 [ 1766.115303] disk 0, wo:0, o:1, dev:sda7 [ 1766.115305] disk 1, wo:0, o:1, dev:sdb7 [ 1778.854524] md: md1: recovery done. [ 1778.887555] md: delaying recovery of md6 until md2 has finished (they share one or more physical units) [ 1778.887560] md: delaying recovery of md5 until md6 has finished (they share one or more physical units) [ 1778.887567] md: recovery of RAID array md2 [ 1778.887569] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 1778.887571] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 1778.887575] md: using 128k window, over a total of 1951744 blocks. [ 1779.051287] RAID10 conf printout: [ 1779.051290] --- wd:2 rd:2 [ 1779.051294] disk 0, wo:0, o:1, dev:sdb1 [ 1779.051296] disk 1, wo:0, o:1, dev:sda1 [ 1815.284730] md: md2: recovery done. [ 1815.334289] md: delaying recovery of md5 until md6 has finished (they share one or more physical units) [ 1815.334296] md: recovery of RAID array md6 [ 1815.334298] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 1815.334301] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 1815.334304] md: using 128k window, over a total of 58596992 blocks. [ 1816.164428] RAID10 conf printout: [ 1816.164432] --- wd:2 rd:2 [ 1816.164435] disk 0, wo:0, o:1, dev:sdb2 [ 1816.164437] disk 1, wo:0, o:1, dev:sda2 [ 3117.712107] md: md6: recovery done. [ 3118.311546] md: recovery of RAID array md5 [ 3118.311550] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 3118.311552] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 3118.311556] md: using 128k window, over a total of 58596992 blocks. [ 3120.596062] RAID10 conf printout: [ 3120.596066] --- wd:2 rd:2 [ 3120.596069] disk 0, wo:0, o:1, dev:sdb6 [ 3120.596071] disk 1, wo:0, o:1, dev:sda6 [ 4044.073328] md: md5: recovery done. [ 4044.605995] RAID10 conf printout: [ 4044.605998] --- wd:2 rd:2 [ 4044.606001] disk 0, wo:0, o:1, dev:sdb5 [ 4044.606003] disk 1, wo:0, o:1, dev:sda5 [ 9672.551219] r8169: eth0: link down [ 9682.110275] r8169: eth0: link up [77550.498934] Clocksource tsc unstable (delta = 62500850 ns) [108131.242561] set_rtc_mmss: can't update from 59 to 0 [112391.159704] postgres[21509]: segfault at bb8e240b ip 080873e6 sp bfa48460 error 4 in postgres[8048000+3d2000] [113346.109189] postgres[21715]: segfault at d0fd6a87 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [114776.653285] postgres[23047]: segfault at c71cc645 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [115432.757556] postgres[23277]: segfault at c142aa87 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [116106.326050] postgres[23610]: segfault at c3078a87 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [116764.951146] postgres[23715]: segfault at c6fc2a87 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [117412.357209] postgres[23916]: segfault at e04b06f0 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [118476.686671] postgres[24234]: segfault at b939d695 ip 080873e6 sp bfa484b0 error 4 in postgres[8048000+3d2000] [119121.115942] postgres[24643]: segfault at cef3b23b ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [119753.510523] postgres[25323]: segfault at bc8b9a41 ip 080873e6 sp bfa484b0 error 4 in postgres[8048000+3d2000] [120944.623354] postgres[26580]: segfault at ce85dcb1 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [122771.960364] postgres[27943]: segfault at dbac8739 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [124611.820123] postgres[28798]: segfault at cacdd9a9 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [125812.826200] postgres[30071]: segfault at c4580622 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [126710.238465] postgres[31019]: segfault at bf39232d ip 080873e6 sp bfa484b0 error 4 in postgres[8048000+3d2000] [127941.935782] postgres[32266]: segfault at c052402a ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [128550.115078] postgres[565]: segfault at ca06bb6f ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [129152.182315] postgres[759]: segfault at c691e883 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [129769.577209] postgres[964]: segfault at b7361000 ip b7296ac1 sp bfa4827c error 4 in libc-2.11.1.so[b7221000+140000] [130383.475324] postgres[1649]: segfault at c023d05a ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [132235.490329] postgres[3657]: segfault at d16faa87 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [133489.813977] postgres[4946]: segfault at c6d0480f ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [135308.916774] postgres[5959]: segfault at d16fea87 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [136534.322755] postgres[7209]: segfault at ca036309 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [137752.556403] postgres[8479]: segfault at bf233fbf ip 080873e6 sp bfa484b0 error 4 in postgres[8048000+3d2000] [138987.816171] postgres[9573]: segfault at bcb68458 ip 080873e6 sp bfa484b0 error 4 in postgres[8048000+3d2000] [140225.333652] postgres[10000]: segfault at 72817e2b ip 082a08ad sp bfa48480 error 4 in postgres[8048000+3d2000] [140850.383662] postgres[10666]: segfault at d0dcdec3 ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [142105.807916] postgres[11996]: segfault at bba0636d ip 080873e6 sp bfa484b0 error 4 in postgres[8048000+3d2000] [142965.986056] postgres[12959]: segfault at cceb978c ip 080873e6 sp bfa484b0 error 5 in postgres[8048000+3d2000] [147526.858631] usb 4-2: new low speed USB device using ohci_hcd and address 2 [147527.016159] usb 4-2: New USB device found, idVendor=04f3, idProduct=0230 [147527.016163] usb 4-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [147527.016165] usb 4-2: Product: USB+PS/2 Optical Mouse [147527.016329] usb 4-2: configuration #1 chosen from 1 choice [147527.729093] usbcore: registered new interface driver hiddev [147527.733005] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input4 [147527.733239] generic-usb 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:12.1-2/input0 [147527.733274] usbcore: registered new interface driver usbhid [147527.733277] usbhid: v2.6:USB HID core driver [147552.279420] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [147613.067244] [drm] Initialized drm 1.1.0 20060810 [147613.106231] [drm] radeon defaulting to kernel modesetting. [147613.106234] [drm] radeon kernel modesetting enabled. [147613.106307] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [147613.108112] [drm] radeon: Initializing kernel modesetting. [147613.108141] [drm] register mmio base: 0xFDFE0000 [147613.108143] [drm] register mmio size: 65536 [147613.108763] ATOM BIOS: ATI [147613.108968] [drm] GPU reset succeed (RBBM_STATUS=0x10000140) [147613.108981] [drm] radeon: VRAM 64M [147613.108982] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF [147613.108984] [drm] radeon: GTT 512M [147613.108986] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [147613.109026] alloc irq_desc for 27 on node -1 [147613.109028] alloc kstat_irqs on node -1 [147613.109037] radeon 0000:01:05.0: irq 27 for MSI/MSI-X [147613.109056] [drm] radeon: irq initialized. [147613.109217] [drm] Detected VRAM RAM=64M, BAR=64M [147613.109222] [drm] RAM width 128bits DDR [147613.109306] [TTM] Zone kernel: Available graphics memory: 440546 kiB. [147613.109308] [TTM] Zone highmem: Available graphics memory: 1002662 kiB. [147613.109327] [drm] radeon: 64M of VRAM memory ready [147613.109329] [drm] radeon: 512M of GTT memory ready. [147613.109358] [drm] GART: num cpu pages 131072, num gpu pages 131072 [147613.113076] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [147613.113095] [drm] radeon: cp idle (0x10000C03) [147613.113137] [drm] Loading RS690/RS740 Microcode [147613.114516] platform radeon_cp.0: firmware: requesting radeon/RS690_cp.bin [147613.271363] [drm] radeon: ring at 0x0000000020000000 [147613.271383] [drm] ring test succeeded in 1 usecs [147613.271554] [drm] radeon: ib pool ready. [147613.271659] [drm] ib test succeeded in 0 usecs [147613.271799] [drm] Radeon Display Connectors [147613.271800] [drm] Connector 0: [147613.271802] [drm] VGA [147613.271804] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [147613.271806] [drm] Encoders: [147613.271807] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [147613.271809] [drm] Connector 1: [147613.271810] [drm] DVI-D [147613.271812] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [147613.271814] [drm] Encoders: [147613.271815] [drm] DFP3: INTERNAL_LVTM1 [147613.362590] [drm] fb mappable at 0xF8040000 [147613.362592] [drm] vram apper at 0xF8000000 [147613.362594] [drm] size 1996800 [147613.362595] [drm] fb depth is 24 [147613.362596] [drm] pitch is 3328 [147613.362858] Console: switching to colour frame buffer device 100x37 [147613.362865] fb0: radeondrmfb frame buffer device [147613.362866] registered panic notifier [147613.362872] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:05.0 on minor 0 [147613.425937] [drm:radeon_cp_setparam_kms] *ERROR* invalid ioctl with kms radeon_cp_setparam_kms [147613.425952] [drm:radeon_cp_init_kms] *ERROR* invalid ioctl with kms radeon_cp_init_kms [147627.892707] executing set pll [147627.901944] executing set crtc timing [147627.901971] [drm] TV-9: set mode 800x600 1a [175477.263462] Program lshw tried to access /dev/mem between ff000->101000. [175482.274826] st: Version 20081215, fixed bufsize 32768, s/g segs 256 [175569.063448] Program lshw tried to access /dev/mem between ff000->101000.