Linux version 2.6.32.2 (root@jashugan) (gcc version 4.3.4 (Debian 4.3.4-6) ) #2 PREEMPT Fri Jan 29 23:05:26 CET 2010 Command line: BOOT_IMAGE=//vmlinuz-2.6.32.2 root=/dev/sda6 ro KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data) BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) DMI 2.3 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0xbffb0 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFC0000000 write-back 2 base 00C0000000 mask FFF0000000 write-combining 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000bffb0000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bffb0000 page 4k kernel direct mapping tables up to bffb0000 @ 10000-15000 ACPI: RSDP 00000000000fa810 00014 (v00 ACPIAM) ACPI: RSDT 00000000bffb0000 00030 (v01 A M I OEMRSDT 05000729 MSFT 00000097) ACPI: FACP 00000000bffb0200 00081 (v01 A M I OEMFACP 05000729 MSFT 00000097) ACPI: DSDT 00000000bffb03f0 0391B (v01 A0277 A0277001 00000001 MSFT 0100000D) ACPI: FACS 00000000bffc0000 00040 ACPI: APIC 00000000bffb0390 00052 (v01 A M I OEMAPIC 05000729 MSFT 00000097) ACPI: OEMB 00000000bffc0040 0003F (v01 A M I OEMBIOS 05000729 MSFT 00000097) ACPI: Local APIC address 0xfee00000 (5 early reservations) ==> bootmem [0000000000 - 00bffb0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00015800a0] TEXT DATA BSS ==> [0001000000 - 00015800a0] #2 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #3 [0001581000 - 0001581280] BRK ==> [0001581000 - 0001581280] #4 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] found SMP MP-table at [ffff8800000ff780] ff780 [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001a00000-ffff8800043fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bffb0 On node 0 totalpages: 786239 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3825 pages, LIFO batch:0 DMA32 zone: 10695 pages used for memmap DMA32 zone: 771561 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information nr_irqs_gsi: 24 Allocating PCI resources starting at c0000000 (gap: c0000000:3f780000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775386 Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32.2 root=/dev/sda6 ro PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Initializing CPU#0 Checking aperture... AGP bridge at 00:00:00 Aperture from AGP @ c0000000 old size 32 MB Aperture from AGP @ c0000000 size 256 MB (APSIZE f00) Node 0: aperture @ c0000000 size 256 MB Memory: 3089448k/3145408k available (3327k kernel code, 452k absent, 54936k reserved, 1710k data, 312k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Experimental preemptable hierarchical RCU implementation. NR_IRQS:288 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 2202.702 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4405.40 BogoMIPS (lpj=2202702) Security Framework initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) tseg: 0000000000 mce: CPU supports 5 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f CPU: AMD Athlon(tm) 64 Processor 3700+ stepping 02 ACPI: Core revision 20090903 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, ffffffff] bus: [00,ff] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [c0000000, fcffffffff] ACPI: bus type pci registered PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI Warning: Incorrect checksum in table [OEMB] - 5D, should be 50 (20090903/tbutils-314) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:01.0: supports D1 pci 0000:00:0a.0: reg 10 32bit mmio: [0xf8b00000-0xf8b03fff] pci 0000:00:0a.0: reg 14 io port: [0xa000-0xa0ff] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0xf8a00000-0xf8a1ffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0d.0: reg 10 32bit mmio pref: [0xdb000000-0xdbffffff] pci 0000:00:0d.0: reg 14 32bit mmio: [0xf8d00000-0xf8d03fff] pci 0000:00:0d.0: reg 18 32bit mmio: [0xf8000000-0xf87fffff] pci 0000:00:0d.0: reg 30 32bit mmio pref: [0xf8c00000-0xf8c0ffff] pci 0000:00:0f.0: reg 10 io port: [0xc000-0xc007] pci 0000:00:0f.0: reg 14 io port: [0xb800-0xb803] pci 0000:00:0f.0: reg 18 io port: [0xb400-0xb407] pci 0000:00:0f.0: reg 1c io port: [0xb000-0xb003] pci 0000:00:0f.0: reg 20 io port: [0xa800-0xa80f] pci 0000:00:0f.0: reg 24 io port: [0xa400-0xa4ff] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] pci 0000:00:10.0: reg 20 io port: [0xc400-0xc41f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.1: reg 20 io port: [0xc800-0xc81f] pci 0000:00:10.1: supports D1 D2 pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.1: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xd000-0xd01f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10 32bit mmio: [0xf8f00000-0xf8f000ff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled HPET not enabled in BIOS. You might try hpet=force boot option pci 0000:00:11.0: Enabled onboard AC97/MC97 devices pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff] pci 0000:00:11.5: supports D1 D2 pci 0000:00:11.6: reg 10 io port: [0x00-0xff] pci 0000:02:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff] pci 0000:02:00.0: reg 14 io port: [0xe000-0xe0ff] pci 0000:02:00.0: reg 18 32bit mmio: [0xfbf00000-0xfbf0ffff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbe00000-0xfbe1ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0xe000-0xefff] pci 0000:00:01.0: bridge 32bit mmio: [0xfbe00000-0xfbffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xf7ffffff] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xdc000000-0xdcffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xf9f00000-0xf9f03fff] pci 0000:01:00.0: reg 18 32bit mmio: [0xf9000000-0xf97fffff] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf9e00000-0xf9e0ffff] pci 0000:01:04.0: reg 10 32bit mmio pref: [0xdd000000-0xddffffff] pci 0000:01:04.0: reg 14 32bit mmio: [0xfb900000-0xfb903fff] pci 0000:01:04.0: reg 18 32bit mmio: [0xfa000000-0xfa7fffff] pci 0000:01:04.0: reg 30 32bit mmio pref: [0xfb800000-0xfb80ffff] pci 0000:01:08.0: reg 10 32bit mmio pref: [0xde000000-0xdeffffff] pci 0000:01:08.0: reg 14 32bit mmio: [0xfbb00000-0xfbb03fff] pci 0000:01:08.0: reg 18 32bit mmio: [0xfa800000-0xfaffffff] pci 0000:01:08.0: reg 30 32bit mmio pref: [0xfba00000-0xfba0ffff] pci 0000:01:0c.0: reg 10 32bit mmio pref: [0xdf000000-0xdfffffff] pci 0000:01:0c.0: reg 14 32bit mmio: [0xfbd00000-0xfbd03fff] pci 0000:01:0c.0: reg 18 32bit mmio: [0xfb000000-0xfb7fffff] pci 0000:01:0c.0: reg 30 32bit mmio pref: [0xfbc00000-0xfbc0ffff] pci 0000:00:0c.0: bridge 32bit mmio: [0xf9000000-0xfbdfffff] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xdc000000-0xdfffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=none,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing pci 0000:00:00.0: BAR 0: address space collision on of device [0xc0000000-0xcfffffff] pci 0000:00:00.0: BAR 0: can't allocate resource Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:0a: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0a: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp 00:0d: mem resource (0xc0000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp 00:0d: mem resource (0x100000-0xbffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:09: ioport range 0x680-0x6ff has been reserved system 00:09: ioport range 0x290-0x297 has been reserved system 00:0a: ioport range 0x3e1-0x3e7 has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x800-0x87f has been reserved system 00:0a: ioport range 0x400-0x41f has been reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0b: iomem range 0xfff80000-0xffffffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:02 pci 0000:00:01.0: IO window: 0xe000-0xefff pci 0000:00:01.0: MEM window: 0xfbe00000-0xfbffffff pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xf7ffffff pci 0000:00:0c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:0c.0: IO window: disabled pci 0000:00:0c.0: MEM window: 0xf9000000-0xfbdfffff pci 0000:00:0c.0: PREFETCH window: 0x000000dc000000-0x000000dfffffff pci 0000:00:01.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] pci_bus 0000:02: resource 1 mem: [0xfbe00000-0xfbffffff] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xf7ffffff] pci_bus 0000:01: resource 1 mem: [0xf9000000-0xfbdfffff] pci_bus 0000:01: resource 2 pref mem [0xdc000000-0xdfffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:01.0: disabling DAC on VIA PCI bridge pci 0000:02:00.0: Boot video device agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 audit: initializing netlink socket (disabled) type=2000 audit(1264808218.078:1): initialized msgmni has been set to 6035 alg: No test for stdrng (krng) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12b Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 0 pci 0000:00:0d.0: enabling device (0000 -> 0002) pci 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [drm] Initialized mga 3.2.1 20051102 for 0000:00:0d.0 on minor 1 pci 0000:01:00.0: enabling device (0000 -> 0002) pci 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [drm] Initialized mga 3.2.1 20051102 for 0000:01:00.0 on minor 2 pci 0000:01:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [drm] Initialized mga 3.2.1 20051102 for 0000:01:04.0 on minor 3 pci 0000:01:08.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [drm] Initialized mga 3.2.1 20051102 for 0000:01:08.0 on minor 4 pci 0000:01:0c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [drm] Initialized mga 3.2.1 20051102 for 0000:01:0c.0 on minor 5 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver via82cxxx 0000:00:0f.1: VIA vt8237 (rev 00) IDE UDMA133 via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x06) pci 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07 ide1: BM-DMA at 0xfc08-0xfc0f Probing IDE interface ide0... Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-cd driver 5.00 sata_via 0000:00:0f.0: version 2.4 sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 sata_via 0000:00:0f.0: routed to hard irq line 10 scsi0 : sata_via scsi1 : sata_via ata1: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xa800 irq 20 ata2: SATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xa808 irq 20 skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 skge 0000:00:0a.0: PCI: Disallowing DAC for device skge 1.13 addr 0xf8b00000 irq 17 chip Yukon-Lite rev 9 skge eth0: addr 00:15:f2:44:08:87 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Advanced Linux Sound Architecture Driver Version 1.0.21. VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: WDC WD1600JS-22MHB0, 02.01C03, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-22M 02.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk ALSA device list: #0: VIA 8237 with ALC850 at 0xd800, irq 22 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 NET: Registered protocol family 15 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: PLEXTOR DVDR PX-755A, 1.08, max UDMA/66 ata2.00: configured for UDMA/66 scsi 1:0:0:0: CD-ROM PLEXTOR DVDR PX-755A 1.08 PQ: 0 ANSI: 5 EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly on device 8:6. Freeing unused kernel memory: 312k freed kjournald starting. Commit interval 5 seconds Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xf8f00000 processor LNXCPU:00: registered as cooling_device0 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32.2 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP] input: PS2++ Logitech Mouse as /devices/platform/i8042/serio1/input/input4 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32.2 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32.2 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32.2 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32.2 uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Adding 8000328k swap on /dev/sda8. Priority:-1 extents:1 across:8000328k EXT3 FS on sda6, internal journal device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge eth0: enabling interface ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) skge eth0: Link is up at 100 Mbps, full duplex, flow control both NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: no IPv6 routers present svc: failed to register lockdv1 RPC service (errno 97).