December 2008 - Radeon HD - openSUSE Mailing Lists

[Bug 13473] New: fancy (i.e. no) picture from driver
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=13473 Summary: fancy (i.e. no) picture from driver Product: xorg Version: 7.3 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: thomas.mey(a)web.de QAContact: xorg-team(a)lists.x.org When i boot my linux kernel through efi the radeonhd driver results in a fancy colored picture. the same kernel booted through csm and the driver works correctly. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 11

[Bug 16573] New: After attaching second monitor, no monitor works
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=16573 Summary: After attaching second monitor, no monitor works Product: xorg Version: 7.3 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: jwupf(a)web.de QAContact: xorg-team(a)lists.x.org CC: jwupf(a)web.de If I attach one monitor to my card(x1900) it is detected well, but if I attach a second monitor to the card all screens are getting signals they can not use. lspci -vv says: > lspci -v -s 01:00 01:00.0 VGA compatible controller: ATI Technologies Inc R580 [Radeon X1900 XT] (Primary) Subsystem: ASUSTeK Computer Inc. Device 0168 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] I/O ports at c000 [size=256] Expansion ROM at fe8c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel modules: fglrx 01:00.1 Display controller: ATI Technologies Inc R580 [Radeon X1900 XT] (Secondary) Subsystem: ASUSTeK Computer Inc. Device 0169 Flags: bus master, fast devsel, latency 0 Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> If you need more detailed information please ask. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 16

[Bug 18431] New: UseAtomBIOS required for X1650 dual-head
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=18431 Summary: UseAtomBIOS required for X1650 dual-head Product: xorg Version: git Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: arequipeno(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=20139) --> (http://bugs.freedesktop.org/attachment.cgi?id=20139) xorg.conf I use a dual-DVI X1650 to drive my two displays -- a 1680x1050 LCD and a 1280x1024 LCD. When the "UseAtomBIOS" option is not used, I see problems with the 1680x1050 LCD display after X has been running for an extended period. I see two problems on the 1680x1050 display: 1. The image on the 1680x1050 display will "shake" back and forth slightly (by a pixel or 2 horizontally). This is most noticeable when working with text, such as e-mail or terminal windows. 2. The 1680x1050 display will occasionally "black out" for a second or so. After much experimentation, I have discovered that these problems do not occur when I enable "UseAtomBIOS". -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 15

[Bug 17788] New: setting physical screen size does not work
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=17788 Summary: setting physical screen size does not work Product: xorg Version: 7.4 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: estellnb(a)gmail.com QAContact: xorg-team(a)lists.x.org # xrandr -q | grep mm DVI-D_1 connected 1920x1200+0+0 550mm x 344mm PANEL connected 1920x1200+1920+0 508mm x 317mm # xrandr --output PANEL --fbmm 370x320 actual outcome: # xrandr -q | grep mm DVI-D_1 connected 1920x1200+0+0 550mm x 344mm PANEL connected 1920x1200+1920+0 508mm x 317mm expected outcome: DVI-D_1 connected 1920x1200+0+0 550mm x 344mm PANEL connected 1920x1200+1920+0 370mm x 320mm -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

[Bug 15468] New: RadeonHD: blank screen with Powercolor Radeon X1950 Pro AGP 512 MB
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=15468 Summary: RadeonHD: blank screen with Powercolor Radeon X1950 Pro AGP 512 MB Product: xorg Version: unspecified Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: major Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: kjeslet(a)hotmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=15848) --> (http://bugs.freedesktop.org/attachment.cgi?id=15848) Xorg.0.log Running radeonhd updated from git as of 2008-04-12 16:21:42 CET. Possibly dupe/related to #14772 and #13605: The X server starts and runs, but the screen either remains blank, switching back and forth between analog and digital, finding no signal, or goes black, with a short flicker from the backlight every two seconds or so. From the log file, the monitor seems to be detected correctly, with the same modeline as reported when using the old radeon driver (which works). After restarting the X server several times or using Option "HPD" swap or off, the monitor is not reported correctly, and of course still gives no picture. Conntest result: rhd_conntest: v1.2.0, git branch master, commit 19c048d3 Checking connectors on 0x7280, 0x148C, 0x2223 (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_1 DDC: RHD_DDC_0 -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 11

[Bug 16264] New: rhdAtomGetTables: No AtomBios signature found for second card
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=16264 Summary: rhdAtomGetTables: No AtomBios signature found for second card Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: bartlebooth(a)telenet.be QAContact: xorg-team(a)lists.x.org Created an attachment (id=16982) --> (http://bugs.freedesktop.org/attachment.cgi?id=16982) xorg configuration file I have a AMD64 with two pci-e graphics cards : Sapphire ATI HD 2600 XT Sapphire ATI HD 2600 Pro I'm running Fedora 9. Configuration of the second card fails. I tried without HPD option, with HPD swap, and HPD off, but the same result in any case. I uploaded the Xorg.0.log file, and the xorg.conf file. The xorg.conf contains a line about livna installation, but this driver has been removed before trying the radeonhd driver. Is there a workaround ? -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 22

[Bug 16205] New: x1950 pro, image displaced and resized
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=16205 Summary: x1950 pro, image displaced and resized Product: xorg Version: unspecified Platform: All OS/Version: All Status: NEW Severity: normal Priority: high Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: i.filter.your.spam(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=16877) --> (http://bugs.freedesktop.org/attachment.cgi?id=16877) screenshot Windows: the image perfectly fills the screen OSX86: the image perfectly fills the screen Linux (fglrx): the images perfectly fills the screen Linux (radeonhd): the image is some kind of displaced and resized I have got a x1950 Pro PCIE with 512MB of GDDR3 RAM (Gecube). pls contact me, if you need any further information -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 53

[Bug 15478] New: Detection Problems with Latest Git (2008-04-11)
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=15478 Summary: Detection Problems with Latest Git (2008-04-11) Product: xorg Version: 7.3 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: twhitehead(a)gmail.com QAContact: xorg-team(a)lists.x.org Created an attachment (id=15866) --> (http://bugs.freedesktop.org/attachment.cgi?id=15866) Xorg log as described above I have a HP Compaq 8510w with the ATI FireGL option (a laptop with both a VGA and a HDMI connector). Running lspci reports the card as 01:00.0 VGA compatible controller: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series], and the Xorg logs report (--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8. I compiled and installed the latest radeonhd driver from the git tree yesterday (2008-04-11), and am still experiencing the following (note that these are not regressions as I had the same issues with the 1.1.0 release as well): 1- The EDID information for the laptop screen is not acquired under any circumstances. Running rhd_conntest gives: rhd_conntest: v1.1.0, non-git sources Checking connectors on 0x9581, 0x103C, 0x30DF (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_NONE The Xorg log file contains lines like so (II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed (WW) RADEONHD(0): No monitor size info, assuming 96dpi (strange that 'Panel' is not all in caps there like everywhere else). The VESA driver, however, reports the following: (II) VESA(0): VESA VBE DDC supported (II) VESA(0): VESA VBE DDC Level 2 (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec. (II) VESA(0): VESA VBE DDC read successfully (II) VESA(0): Manufacturer: LPL Model: cd00 Serial#: 0 (II) VESA(0): Year: 2006 Week: 0 (II) VESA(0): EDID Version: 1.3 (II) VESA(0): Digital Display Input (II) VESA(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21 (II) VESA(0): Gamma: 2.20 (II) VESA(0): No DPMS capabilities specified; RGB/Color Display (II) VESA(0): First detailed timing is preferred mode (II) VESA(0): redX: 0.590 redY: 0.345 greenX: 0.326 greenY: 0.544 (II) VESA(0): blueX: 0.157 blueY: 0.141 whiteX: 0.313 whiteY: 0.329 (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 122.0 MHz Image Size: 331 x 207 mm (II) VESA(0): h_active: 1680 h_sync: 1712 h_sync_end 1776 h_blank_end 1904 h_border: 0 (II) VESA(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1066 v_border: 0 (II) VESA(0): LGPhilipsLCD (II) VESA(0): LP154WE2-TLA1 (II) VESA(0): EDID (in hex): (II) VESA(0): 00ffffffffffff00320c00cd00000000 (II) VESA(0): 00100103802115780a19459758538b28 (II) VESA(0): 24505400000001010101010101010101 (II) VESA(0): 010101010101a82f90e0601a10402040 (II) VESA(0): 13004bcf100000190000000000000000 (II) VESA(0): 00000000000000000000000000fe004c (II) VESA(0): 475068696c6970734c43440a000000fe (II) VESA(0): 004c503135345745322d544c41310035 (II) VESA(0): EDID vendor "LPL", prod id 52480 2- If I plug an external monitor into the HDMI port (through a HDMI -> DVI cable), either before or after starting Xorg, the monitor indicates it is switching to DVI mode, but nothing happens on the computer end (xrandr report nothing and nothing shows up in the Xorg logs). Running rhd_conntest gives: rhd_conntest: v1.1.0, non-git sources Checking connectors on 0x9581, 0x103C, 0x30DF (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_1 DDC: RHD_DDC_1 3- If I plug an external monitor into the VGA port before or after starting Xorg, it is recognized, and I can fully control it via xrandr. Running rhd_conntest gives: rhd_conntest: v1.1.0, non-git sources Checking connectors on 0x9581, 0x103C, 0x30DF (@01:00:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 However, if I have plugged it in before restarting Xorg, I then run into these additional issues: a) I loose my ability to switch to a virtual terminal. That is, when I press ctrl+alt+F1, the screen goes blank, but I can tell my key strokes are going to the virtual terminal. b) The latop screen also refuses to work (remains dark) on any subsequent restarts of Xorg (without rebooting the latop) unless the external monitor is re-plugged into the VGA port before the restart. When I'm experiencing this dark screen thing, the Xorg log file reports: (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_VGA, "VGA CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "LVDS LCD1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_D DFP2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_NONE, RHD_OUTPUT_TMDSA } } (II) RADEONHD(0): Connector[3] {RHD_CONNECTOR_DVI_SINGLE, "HDMI_TYPE_ADFP1", RHD_DDC_1, RHD_HPD_1, { RHD_OUTPUT_NONE, RHD_OUTPUT_NONE } } (--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1 (II) RADEONHD(0): LVDS SEQ Dig onto DE: 30 (II) RADEONHD(0): LVDS SEQ DE to BL: 360 (II) RADEONHD(0): LVDS Off Delay: 500 (II) RADEONHD(0): LVDS Duallink: 0x1 (II) RADEONHD(0): LVDS 24Bit: 0x0 (II) RADEONHD(0): LVDS FPDI: 0x0 (II) RADEONHD(0): LVDS Temporal Dither : 0x40 (II) RADEONHD(0): LVDS Spatial Dither : 0x0 (II) RADEONHD(0): LVDS Grey Level: 0xc (EE) RADEONHD(0): AtomBIOS returned 12 Grey Levels (--) RADEONHD(0): Detected a 18bit dual link panel. (--) RADEONHD(0): Attaching Output LVDS to Connector PANEL (--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-D 1 (II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A (II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output LVDS (II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output TMDS A (II) RADEONHD(0): Output VGA_1 using monitor section PANEL (II) RADEONHD(0): Output PANEL using monitor section PANEL (II) RADEONHD(0): Output DVI-D_1 has no monitor section (II) RADEONHD(0): Query for AtomBIOS Get Panel EDID: failed (WW) RADEONHD(0): No monitor size info, assuming 96dpi. (II) RADEONHD(0): Output VGA_1 disconnected (II) RADEONHD(0): Output PANEL connected (II) RADEONHD(0): Output DVI-D_1 disconnected (II) RADEONHD(0): Output PANEL using initial mode 1680x1050 Also, if I unplug the VGA connection without first disabling it with xrandr, xrandr starts displaying bogus DVI-D_1 information (even if nothing has ever been plugged into the HDMI connection) until I re-plugin the VGA connection or run "xrandr --output VGA_1 --off" (which still goes through okay even after the VGA connection unplugged): Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680 VGA_1 disconnected 1280x1024+0+0 360mm x 290mm PANEL connected 1680x1050+0+0 444mm x 277mm 1680x1050 60.1*+ DVI-D_1 disconnected 1280x1024 (0x46) 108.0MHz h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 4- If xrandr is ran before plugging in the VGA connector, the display always shows a miore pattern in the colours. This persists until Xorg is restarted and the display is plugged in before running xrandr. Thanks! -Tyson PS: I've attached the complete Xorg log from the following session: 1- Boot the machine up with no external connections attached. 2- Run 'xrandr' (reports the laptop screen). 3- Plug in a VGA connection. 4- Run 'xrandr' (reports the laptop screen and the VGA). 5- Run 'xrandr --output VGA_1 --auto' (gives the miore screen). 6- Disconnect the VGA connection. 7- Run 'xrandr' (reports the laptop screen and bogus DVI_D-1 info). 8- Run 'xrandr --output VGA_1 --off' (turns off the external display) 9- Run 'xrandr' (reports only the laptop screen). 10- Plug in a HDMI connection (HDMI->DVI cable monitor). 11- Run 'xrandr' (reports the laptop screen). 12- Disconnect the HDMI connection. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 18

[Bug 14328] New: Flickering in dual monitor setup when scrolling in maximized kde-apps
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=14328 Summary: Flickering in dual monitor setup when scrolling in maximized kde-apps Product: xorg Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: sinisa.dukanovic(a)sit.fraunhofer.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=14069) --> (http://bugs.freedesktop.org/attachment.cgi?id=14069) my xorg.conf I'm running Debian testing/unstable with Xorg 7.2 current git of radeonhd and KDE 3.5.8. My setup consists of a Dell X1300 (01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]) and two monitors. The flickering i'm reporting started when 2D-Acceleration was enabled. Whenever i have a maximized kde application that contains a lot of text (konqueror, kate, kmail) running on one monitor and i start scrolling up/down or left/right, horizontal flickering lines apears on both monitors. Also maximizing and un-maximizing a KDE-application cases both monitors to flicker for a very short, yet recognizable, time. This flickering does not occur when i start non-kde applications, like firefox inkscape or when the kde applications are not maximized... I attached my xorg.conf. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 15

[Bug 18601] New: Asus M2A-VM (RS690) HDMI connected via HDMI to a 42" Panasonic flatscreen TV (1080p) results in: (EE) Screen(s) found, but none have a usable configuration.
by bugzilla-daemon＠freedesktop.org 07 Nov '11

07 Nov '11

http://bugs.freedesktop.org/show_bug.cgi?id=18601 Summary: Asus M2A-VM (RS690) HDMI connected via HDMI to a 42" Panasonic flatscreen TV (1080p) results in: (EE) Screen(s) found, but none have a usable configuration. Product: xorg Version: 7.2 Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Keywords: NEEDINFO Severity: major Priority: high Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: c.schostok(a)yahoo.de QAContact: xorg-team(a)lists.x.org Created an attachment (id=20429) --> (http://bugs.freedesktop.org/attachment.cgi?id=20429) Xorg.0.log Section "ServerLayout" Identifier "single head configuration Panasonic" Screen 0 "TV" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" RgbPath "/usr/share/X11/rgb" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/75dpi/" EndSection Section "Module" Load "glx" Load "dri" Load "xtrap" # Load "fbdevhw" # Load "v4l" # Load "type1" Load "dbe" # Double buffer extension Load "extmod" Load "freetype" EndSection Section "ServerFlags" Option "AIGLX" "On" Option "AllowMouseOpenFail" "true" Option "blank time" "0" Option "standby time" "0" Option "suspend time" "0" Option "off time" "0" Option "NoPM" "1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "AutoRepeat" "500 30" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "PanasonicTV" Option "DPMS" "false" EndSection Section "Device" Driver "radeonhd" Identifier "X1250_radeonhd" Option "DPMS" "Off" BusID "PCI:1:5:0" EndSection Section "Device" Identifier "X1250_fglrx" Driver "fglrx" Option "ForceMonitors" "notv" Option "XAANoOffscreenPixmaps" "true" Option "TexturedVideo" "true" Option "UseFastTLS" "1" Option "VideoOverlay" "On" Option "OpenGLOverlay" "On" EndSection Section "Screen" Identifier "TV" Device "X1250_radeonhd" Monitor "PanasonicTV" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Extensions" Option "RENDER" "On" Option "Composite" "Off" Option "XVideo" "On" EndSection -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 11