December 2007 - Radeon HD - openSUSE Mailing Lists

[Bug 13477] New: bad graphics on dual-head screen two
by bugzilla-daemon＠freedesktop.org 03 Dec '07

03 Dec '07

http://bugs.freedesktop.org/show_bug.cgi?id=13477 Summary: bad graphics on dual-head screen two Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: joachim.deguara(a)amd.com QAContact: xorg-team(a)lists.x.org what happens is I start xdm and it is in cloned mode, next I log in and set the dual-head with xrandr which results in the artefacts on the second screen (actually DVI-I_1/digital, but since it is rightmost I call it second). To get rid of the artifacts I kill kwin and start fvwm (twm and openbox don't help only fvwm) then the artifact is gone and I can kill fvwm and go back to kwin all the while there is no new events in xorg.0.log since going from clone to dual-head. This even happens if I have the second screen overlap that means both are 1280x1024 and screen two is now at offest 640x0 then there is that strip of 640x1024 which is rendered correctly on screen 1 but not on screen 2. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 4

Some questions about developement
by Roberth Sjonøy 03 Dec '07

03 Dec '07

Hello Now after 1.0.0 release, what will be the next step in developement otherwise than bug fixes? Regards, Roberth Sjonøy. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

kernel warning message about NMI with unknown reason]
by Jens Lody 03 Dec '07

03 Dec '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On my Dell Inspiron 9400 with X1400 I've got similar messages. I first wrote a mail on October the 4th, but did not file a bug-report. I also have problems when switching to console: sometimes the console is flickering (a little like a CRT that does not synchronize). I use vesafb on console with 1600x1200, that means there is a black-border at the left and the right (1920x1200 native resolution). On the left side an in the text-area I see the flickering, the right border stays black. The flickering disappears when switching to X and back to console (sometimes I need to switch two or three times). Both bugs exists since beginning of October and are stille there in every git-version since then. Regards Jens - -- Jens Lody |\ _,,,---,,_ /,`.-'`' -. ;-;;,_ <|,4- ) )-,_..;\ ( `'-' '---''(_/--' `-'\_) - -------- Original-Nachricht -------- Betreff: [radeonhd] [Bug 13480] New: kernel warning message about NMI with unknown reason Datum: Sat, 1 Dec 2007 04:19:23 -0800 (PST) Von: bugzilla-daemon(a)freedesktop.org An: xorg-team(a)lists.x.org http://bugs.freedesktop.org/show_bug.cgi?id=13480 Summary: kernel warning message about NMI with unknown reason Product: xorg Version: git Platform: Other URL: http://lists.opensuse.org/radeonhd/2007-10/msg00233.html OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: stefan.becker(a)nokia.com QAContact: xorg-team(a)lists.x.org When using radeonhd driver I get randomly once in a while the following warning messages from the kernel: kernel: Uhhuh. NMI received for unknown reason a0 on CPU 0. kernel: You have some hardware problem, likely on the PCI bus. kernel: Dazed and confused, but trying to continue As far as I remember these messages started to appear with the following commit: commit 1103f74dc04e80f47a84367771e6b981d6a902ac My current version is: (II) RADEONHD: version 1.0.0, built from git branch master, commit 9fe776ed - -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email - ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team - -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHUZ6pyW5ifG7rJckRAiDXAJ9tkrOAPIje/DzjAePKIpZRdjvX7ACdGRVn 3KdGKPLuzhO58jP5mUK87eE= =OMVK -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

2 1

Xrandr mouse flicker bug
by Maarten Lankhorst 03 Dec '07

03 Dec '07

Hello, After trying xrandr 1.2 with a virtual size of 4096x4096 and a panel of resolution 1280x800, and a lcd screen (rightof) of 1280x1024 I came across a bug: If I move the mouse on the panel, there are 2 vertical bars of approximately 2 mm in which the mouse cursor will flicker visually, moving them out of those bars the mouse works fine. This only seems to happen when I have a lcd screen attached, if I do xrandr --output VGA_1 --off it behaves normally again. Regards, Maarten. -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 0

Re: Re: [radeonhd] RS690 nearly working
by savignien hercule 01 Dec '07

01 Dec '07

> De: Luc Verhaegen <libv(a)skynet.be> > A: Coleman Kane <cokane(a)cokane.org> > Objet: Re: [radeonhd] RS690 nearly working > Date: Fri, 30 Nov 2007 16:42:53 +0100 > On Fri, Nov 30, 2007 at 10:14:04AM -0500, Coleman Kane wrote: > > Luc Verhaegen wrote: > > > On Fri, Nov 30, 2007 at 12:58:31PM +0000, savignien hercule wrote: > > > > > >> Hello, > > >> > > >> I'm not sure that the attachments works well with the list so here is > > >> the log. > > >> > > > > > > You wanted 1600x1200? According to this log, this was the actual mode > > > that was set up :) > > > > > > It seems we got our lines crossed here, as i am not sure anymore what > > > problem you were seeing in the first place then :) > > > > > > Thanks, > > > > > > Luc Verhaegen. > > > SUSE/Novell X Driver Developer. > > > > > He's getting the mode set up, but the display exhibits the "fuzzy > > vertical stripes" problem that I originally had at 1600x1200. The only > > resolution he can use and actually see what's going on is 1152x864. So > > the card does set the framebuffer to 1600x1200, but all of the rendering > > is scrambled on the screen. > > > > savignien, can you take a screenshot with a digital camera or with a > > cell phone of the problem? I think you're having the same problem I had, > > but it is really hard to actually describe it. Also, try running the > > rhd_conntest program, unless you've already done that. > > > > -- > > Coleman Kane > > Did he run fglrx before and didn't powercycle in between? Because that's > been culprit there so far. > > We don't know yet what we need to do to fix this, but we can reproduce > it with fglrx so we will dig it out. > > Luc Verhaegen. > SSUE/Novell X Driver Developer. > -- > To unsubscribe, e-mail: <a href=mailto:"radeonhd+unsubscribe(a)opensuse.org">radeonhd+unsubscribe(a)opensuse.org</a> > For additional commands, e-mail: <a href=mailto:"radeonhd+help(a)opensuse.org">radeonhd+help(a)opensuse.org</a> Hello, I never used fglrx. The "default" settings after installation was vesa and I only tried radeonhd after that. I'm also pretty sure that I powercycled at one moment between my attempts. Yes the log I sent was a try to get 1600x1200 working but it exhibited the "fuzzy" stripes symptom. I thought it would more significant than a successful log of 1152x864, maybe I was wrong... I'll try to take a screenshot with a digital camera (I'll have to borrow one...) Meanwhile here is the output of rhd_conntest : rhd_conntest: v0.0.4, git branch master, commit e86e764b Checking connectors on 0x791E, 0x1462, 0x7327 (@01:05:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_0 DDC: RHD_DDC_0 DDC Line[0]: Slaves: 6e a0 Sincerely, savi.

1 0

[Bug 13430] New: dual-head screens always have same position
by bugzilla-daemon＠freedesktop.org 01 Dec '07

01 Dec '07

http://bugs.freedesktop.org/show_bug.cgi?id=13430 Summary: dual-head screens always have same position Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/radeonhd AssignedTo: lverhaegen(a)suse.de ReportedBy: joachim.deguara(a)amd.com QAContact: xorg-team(a)lists.x.org Perhaps I am just doing something wrong but with xrandr both of my screen always have the same position either 0x0 or 1280x0. They are both DVI TFTs at 1280x1024 made by HP. I tried xrandr --auto and xrandr --output DVI-I_2/digital --left-of DVI-I_1/digital and finally just trying to set the position of one screen with xrandr --output DVI-I_2/digital --pos 0x0. As mentioned both screens always had the same position even when I explicitly set one of them to a different position then both would change. Here are the logs associated with it. -- Configure bugmail: http://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the QA contact for the bug, or are watching the QA contact. _______________________________________________ xorg-team mailing list xorg-team(a)lists.x.org http://lists.x.org/mailman/listinfo/xorg-team -- To unsubscribe, e-mail: radeonhd+unsubscribe(a)opensuse.org For additional commands, e-mail: radeonhd+help(a)opensuse.org

1 11