13 Sep
2005
13 Sep
'05
16:44
hello, I have the following problem, on having installed Suse ppc, it gives me the following message "You may not see any kernel console output, use a serial console on com1 in this case" Machine = RS600 43P model 140 tipo 7043 604e 332 MHZ Graphical card = GXT550P I have tried with "boot cdrom:,zimage root=/dev/cdrom load_ramdisk=1 console=ttyS0,9600 but, nothing Thank you.
13 Sep
13 Sep
17:08
New subject: [suse-ppc] RS600 439 + problem with graphical card
On Tue, Sep 13, jjcp@ono.com wrote:
Graphical card = GXT550P
I have tried with "boot cdrom:,zimage root=/dev/cdrom load_ramdisk=1 console=ttyS0,9600
Just 'boot cdrom' will do it, if the CD is ok. There is CD1/boot/zImage.prep.initrd, this is the bootfile. You can load it also via TFTP, or from an existing Linux installation.
6793
Age (days ago)
6793
Last active (days ago)
1 comments
2 participants
participants (2)
-
jjcp@ono.com
-
Olaf Hering