Hello All, I am trying to install SLES 8 onto a p615 with RAID-1 between two drives. sda Drive 1 sda1 4 MB PPC PReP Boot sda2 1 GB Linux RAID sda3 32.9 GB Linux RAID sdb Drive 2 sdb1 4 MB PPC PReP Boot sdb2 1 GB Linux RAID sdb3 32.9GB Linux RAID I then created 2 raid devices md0 sda2, sdb2 swap md1 sda3, sdb3 / According to SuSE, you need a small (100MB) /kernel partition, and must put the boot file and the config file in this partion… I have tried that also, and got the following error when I ran lilo: --- snip --- newbb:~/suse # lilo running on chrp install on /dev/sda Installing /boot/yaboot.chrp onto /dev/sda1 519+1 records in 519+1 records out check the image files ERROR: image /boot/vmlinuz is not on bootdevice /dev/sda `/tmp/ppc_lilo/yaboot.conf' -> `/etc/yaboot.conf' --- snip --- Now, my question (finally ☺). 1. Has anyone successfully installed SLES 8 on ANY pseries and set up RAID/LVM to do basic drive mirroring? This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited. This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster@orlandoregional.org . If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Regional Healthcare by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Regional Healthcare.