Linux version 2.4.0-test7-packet (root@pepsi) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #24 SMP Fri Sep 8 20:26:35 EDT 2000 BIOS-provided physical RAM map: BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) BIOS-e820: 0000000000000400 @ 000000000009fc00 (usable) BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved) BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved) BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved) BIOS-e820: 000000000bef0000 @ 0000000000100000 (usable) BIOS-e820: 000000000000d000 @ 000000000bff3000 (ACPI data) BIOS-e820: 0000000000003000 @ 000000000bff0000 (ACPI NVS) Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at 000f5ae0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 49136 zone(0): 4096 pages. zone(1): 45040 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. Bootup CPU Processor #1 Pentium(tm) Pro APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. Bus #0 is PCI Bus #1 is PCI Bus #2 is ISA I/O APIC #2 Version 17 at 0xFEC00000. Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08 Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f Int: type 0, pol 3, trig 3, bus 0, IRQ 1f, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 13 Int: type 0, pol 3, trig 3, bus 0, IRQ 34, APIC ID 2, APIC INT 11 Int: type 0, pol 3, trig 3, bus 0, IRQ 3c, APIC ID 2, APIC INT 10 Int: type 0, pol 3, trig 3, bus 0, IRQ 4c, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 0, IRQ 4d, APIC ID 2, APIC INT 12 Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10 Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17 Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 Processors: 2 mapped APIC to ffffe000 (fee00000) mapped IOAPIC to ffffd000 (fec00000) Kernel command line: BOOT_IMAGE=packet ro root=2103 ip=off video=matrox:off video=vga16:off hdc=ide-scsi console=ttyS0,9600 console=tty0 single ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 551262798 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1101.00 BogoMIPS Memory: 190908k/196544k available (1482k kernel code, 5248k reserved, 118k data, 216k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au) CPU0: Intel Celeron (Mendocino) stepping 05 per-CPU timeslice cutoff: 356.82 usecs. Getting VERSION: 40011 Getting VERSION: 40011 Getting ID: 0 Getting ID: f000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 CPU present map: 3 Booting processor 1/1 eip 2000 Setting warm reset code and vector. 1. 2. 3. Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1. After apic_write. Startup point 1. Initializing CPU#1 Waiting for send to finish... CPU#1 (phys ID: 1) waiting for CALLOUT +Sending STARTUP #2. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Before Callout 1. After Callout 1. CALLIN, before setup_local_APIC(). masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1101.00 BogoMIPS Stack at about cbfe7fbc OK. CPU1: Intel Celeron (Mendocino) stepping 05 CPU has booted. Before bogomips. Total of 2 processors activated (2202.01 BogoMIPS). Before bogocount - setting activated=1. Boot done. ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. Synchronizing Arb IDs. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-12, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=49 pin1=2 pin2=0 activating NMI Watchdog ... done. number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 71 0f 003 03 0 0 0 0 0 1 1 79 10 003 03 1 1 0 1 0 1 1 81 11 003 03 1 1 0 1 0 1 1 89 12 003 03 1 1 0 1 0 1 1 91 13 003 03 1 1 0 1 0 1 1 99 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. calibrating APIC timer ... ..... CPU clock speed is 551.2151 MHz. ..... host bus clock speed is 100.2208 MHz. cpu: 0, clocks: 1002208, slice: 334069 CPU0 cpu: 1, clocks: 1002208, slice: 334069 CPU1 checking TSC synchronization across CPUs: passed. Setting commenced=1, go go go mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7000] at 00:07.0 PCI->APIC IRQ transform: (B0,I7,P3) -> 19 PCI->APIC IRQ transform: (B0,I9,P0) -> 19 PCI->APIC IRQ transform: (B0,I13,P0) -> 17 PCI->APIC IRQ transform: (B0,I15,P0) -> 16 PCI->APIC IRQ transform: (B0,I19,P0) -> 18 PCI->APIC IRQ transform: (B0,I19,P1) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 16384) IPv4 over IPv4 tunneling driver early initialization of device tunl0 is deferred GRE over IPv4 tunneling driver early initialization of device gre0 is deferred Linux IP multicast router 0.06 plus PIM-SM Initializing RT netlink socket Starting kswapd v1.7 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio HPT366: IDE controller on PCI bus 00 dev 99 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:pio, hdh:pio hda: IBM-DHEA-38451, ATA DISK drive hdc: QPS CD-R PX-W8432T, ATAPI CDROM drive hdd: CD-532E, ATAPI CDROM drive hde: WDC WD272AA, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0xcc00-0xcc07,0xd002 on irq 18 hda: 16514064 sectors (8455 MB) w/472KiB Cache, CHS=1027/255/63, UDMA(33) hde: 53128656 sectors (27202 MB) w/2048KiB Cache, CHS=52707/16/63, UDMA(66) Partition check: hda: hda1 hde: hde1 hde2 hde3 Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ DETECT_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10c Non-volatile memory driver v1.1 Linux PCMCIA Card Services 3.1.11 options: [pci] [cardbus] [pm] ip_conntrack (1535 buckets, 12280 max) ACPI: support found ip_tables: (c)2000 Netfilter core team ACPI: namespace load failed ACPI: -0550: <7>ACPI: *** Success: Entire namespace and objects deleted ds: no socket drivers loaded! VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 216k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Adding Swap: 131536k swap-space (priority -1) scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi : 1 host. Vendor: QPS Model: CD-R PX-W8432T Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TEAC Model: CD-532E Rev: 3.0A Type: CD-ROM ANSI SCSI revision: 02 udf: registering filesystem pktcdvd: v0.0.2c 08/09/2000 Jens Axboe (axboe@suse.de) Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.11 sr1: scsi3-mmc drive: 32x/32x xa/form2 cdda tray VFS: Disk change detected on device sr(11,0) pktcdvd: writer sr0 sucessfully registered pktcdvd: 454208KB available on disc pktcdvd: inserted media is CD-RW pktcdvd: Fixed packets, 32 blocks / packet, Mode-1 disc pktcdvd: speed (R/W) 6/4 pktcdvd: 454208KB available on disc UDF-fs DEBUG (../linux-2.4/lowlevel.c, 65): udf_get_last_session: CDROMMULTISESSION not supported: rc=-22 UDF-fs DEBUG (../linux-2.4/super.c, 1355): udf_read_super: Multi-session=0 UDF-fs DEBUG (../linux-2.4/super.c, 1364): udf_read_super: Lastblock=227103 UDF-fs DEBUG (../linux-2.4/super.c, 392): udf_vrs: Starting at sector 16 (2048 byte sectors) UDF-fs DEBUG (../linux-2.4/super.c, 742): udf_load_pvoldesc: recording time 968452905/179539, 2000/09/08 17:41 (1ed4) UDF-fs DEBUG (../linux-2.4/super.c, 928): udf_load_logicalvol: Partition (0:0) type 2 on volume 1 UDF-fs DEBUG (../linux-2.4/super.c, 938): udf_load_logicalvol: FileSet found in LogicalVolDesc at block=32, partition=0 UDF-fs DEBUG (../linux-2.4/super.c, 789): udf_load_partdesc: Searching map: (0 == 0) UDF-fs DEBUG (../linux-2.4/super.c, 823): udf_load_partdesc: unallocatedSpaceBitmap (part 0) @ 0 UDF-fs DEBUG (../linux-2.4/super.c, 860): udf_load_partdesc: Partition (0:0 type 1522) starts at physical 2464, block length 224352 UDF-fs DEBUG (../linux-2.4/super.c, 1177): udf_load_partition: Using anchor in block 227103 UDF-fs DEBUG (../linux-2.4/super.c, 714): udf_find_fileset: Fileset at block=32, partition=0 UDF-fs DEBUG (../linux-2.4/super.c, 775): udf_load_fileset: Rootdir at block=64, partition=0 UDF-fs INFO UDF 0.9.3-cvs-rw (2000/06/17) Mounting volume '', timestamp 2000/09/08 17:41 (1ed4) pktcdvd: 454208KB available on disc pktcdvd: inserted media is CD-RW pktcdvd: Fixed packets, 32 blocks / packet, Mode-1 disc pktcdvd: speed (R/W) 6/4 pktcdvd: 454208KB available on disc UDF-fs DEBUG (../linux-2.4/lowlevel.c, 65): udf_get_last_session: CDROMMULTISESSION not supported: rc=-22 UDF-fs DEBUG (../linux-2.4/super.c, 1355): udf_read_super: Multi-session=0 UDF-fs DEBUG (../linux-2.4/super.c, 1364): udf_read_super: Lastblock=227103 UDF-fs DEBUG (../linux-2.4/super.c, 392): udf_vrs: Starting at sector 16 (2048 byte sectors) UDF-fs DEBUG (../linux-2.4/super.c, 742): udf_load_pvoldesc: recording time 968452905/179539, 2000/09/08 17:41 (1ed4) UDF-fs DEBUG (../linux-2.4/super.c, 928): udf_load_logicalvol: Partition (0:0) type 2 on volume 1 UDF-fs DEBUG (../linux-2.4/super.c, 938): udf_load_logicalvol: FileSet found in LogicalVolDesc at block=32, partition=0 UDF-fs DEBUG (../linux-2.4/super.c, 789): udf_load_partdesc: Searching map: (0 == 0) UDF-fs DEBUG (../linux-2.4/super.c, 823): udf_load_partdesc: unallocatedSpaceBitmap (part 0) @ 0 UDF-fs DEBUG (../linux-2.4/super.c, 860): udf_load_partdesc: Partition (0:0 type 1522) starts at physical 2464, block length 224352 UDF-fs DEBUG (../linux-2.4/super.c, 1177): udf_load_partition: Using anchor in block 227103 UDF-fs DEBUG (../linux-2.4/super.c, 714): udf_find_fileset: Fileset at block=32, partition=0 UDF-fs DEBUG (../linux-2.4/super.c, 775): udf_load_fileset: Rootdir at block=64, partition=0 UDF-fs INFO UDF 0.9.3-cvs-rw (2000/06/17) Mounting volume '', timestamp 2000/09/08 17:41 (1ed4) Linux Tulip driver version 0.9.9 (August 11, 2000) eth0: Lite-On 82c168 PNIC rev 32 at 0xc800, 00:A0:CC:62:2B:2A, IRQ 16. eth0: MII transceiver #1 config 3000 status 7829 advertising 01e1. pktcdvd: 454208KB available on disc pktcdvd: inserted media is CD-RW pktcdvd: Fixed packets, 32 blocks / packet, Mode-1 disc pktcdvd: speed (R/W) 6/4 pktcdvd: 454208KB available on disc UDF-fs DEBUG (../linux-2.4/lowlevel.c, 65): udf_get_last_session: CDROMMULTISESSION not supported: rc=-22 UDF-fs DEBUG (../linux-2.4/super.c, 1355): udf_read_super: Multi-session=0 UDF-fs DEBUG (../linux-2.4/super.c, 1364): udf_read_super: Lastblock=227103 UDF-fs DEBUG (../linux-2.4/super.c, 392): udf_vrs: Starting at sector 16 (2048 byte sectors) UDF-fs DEBUG (../linux-2.4/super.c, 742): udf_load_pvoldesc: recording time 968452905/179539, 2000/09/08 17:41 (1ed4) UDF-fs DEBUG (../linux-2.4/super.c, 928): udf_load_logicalvol: Partition (0:0) type 2 on volume 1 UDF-fs DEBUG (../linux-2.4/super.c, 938): udf_load_logicalvol: FileSet found in LogicalVolDesc at block=32, partition=0 UDF-fs DEBUG (../linux-2.4/super.c, 789): udf_load_partdesc: Searching map: (0 == 0) UDF-fs DEBUG (../linux-2.4/super.c, 823): udf_load_partdesc: unallocatedSpaceBitmap (part 0) @ 0 UDF-fs DEBUG (../linux-2.4/super.c, 860): udf_load_partdesc: Partition (0:0 type 1522) starts at physical 2464, block length 224352 UDF-fs DEBUG (../linux-2.4/super.c, 1177): udf_load_partition: Using anchor in block 227103 UDF-fs DEBUG (../linux-2.4/super.c, 714): udf_find_fileset: Fileset at block=32, partition=0 UDF-fs DEBUG (../linux-2.4/super.c, 775): udf_load_fileset: Rootdir at block=64, partition=0 UDF-fs INFO UDF 0.9.3-cvs-rw (2000/06/17) Mounting volume '', timestamp 2000/09/08 17:41 (1ed4) eth0: Setting full-duplex based on MII#1 link partner capability of 41e1. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (interrupt-driven). lp0: console ready Linux video capture interface: v1.00 i2c-core.o: i2c core module i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.41 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Bt8xx card found (0). bttv0: Bt848 (rev 18) at 00:0d.0, irq: 17, latency: 32, memory: 0xda001000 bttv0: model: BT848A(Phoebe Tv Master + FM) [insmod option] bttv0: gpio config override: mask=0xffffffff, mux=0x2,0xffffffff,0xffffffff,0xffffffff,0xffffffff i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c-algo-bit.o:1 scl: 1 sda: 0 i2c-algo-bit.o:2 scl: 1 sda: 1 i2c-algo-bit.o:3 scl: 0 sda: 1 i2c-algo-bit.o:4 scl: 1 sda: 1 i2c-algo-bit.o: bt848 #0 passed test. i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. bttv0: i2c: checking for TDA9875 @ 0xb0... not found i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0x60 bttv0: i2c attach [Temic NTSC] i2c-core.o: client [Temic NTSC] registered to adapter [bt848 #0](pos. 0). mice: PS/2 mouse device common for all mice usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.237 $ time 18:15:52 Sep 8 2000 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xc000, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: USB new device connect, assigned device number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: USB new device connect, assigned device number 2 usb.c: USB device 2 (prod/vend 0x45e/0x29) is not claimed by any active driver. usb.c: registered new driver hid usb-uhci.c: interrupt, status 3, frame# 1693 mouse0: PS/2 mouse device for input0 input0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb1:2.0 es1370: version v0.33 time 18:14:47 Sep 8 2000 es1370: found adapter at io 0xc400 irq 19 es1370: features: joystick off, line in, mic impedance 0