Hello, The w-lan in my medion md-96400 notebook doesn't work with suse 10.0. As I don't know what chipset is built in, I tried each of the 10 drivers in yast. ping 192.168.1.1 answers "network not available" every time. I use the 386 32 bit version, although the md-96400 has a tourion 64 inside. Can that be the problem? Networking with suse 10.0 works fine via ethernet an w-lan has no problems with windows xp. I know how wep encryption works and this should not be the problem. I use an other notebook with a pcmcia-card (acx100) without difficulties (linux an windows). What can I do? Greetings Wolfgang -- Wolfgang Spaniol, Geisenheim Deutschland w.spaniol@gmx.net
On Wed, 01 Mar 2006 20:32:16 +0100 Wolfgang Spaniol
Hello,
The w-lan in my medion md-96400 notebook doesn't work with suse 10.0. As I don't know what chipset is built in, I tried each of the 10 drivers in yast.
Knowing the chipset would probably help, what does "lspci" say about it?
ping 192.168.1.1 answers "network not available" every time.
I'd rather use "iwconfig" to see if the device is up and running. -Teemu
On Wednesday 01 March 2006 20:58, Teemu Nikkilä wrote:
Hello,
The w-lan in my medion md-96400 notebook doesn't work with suse 10.0. As I don't know what chipset is built in, I tried each of the 10 drivers in yast.
Hello Teemu, Go into the Konsole, enter su, enter password of root user and enter command hwinfo After some time you get a long list of the hardware details. Look for the details of the wireless nic -- Regards, Frans Leerink
Am Mittwoch, 1. März 2006 20:58 schrieb Teemu Nikkilä:
Knowing the chipset would probably help, what does "lspci" say about it?
Hello, Vigor14:~ # lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc: Unknown device 5a3f 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 01) 00:14.6 Modem: ATI Technologies Inc: Unknown device 4378 (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE) 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:05.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 02:05.2 Class 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01) 02:05.3 Bridge: O2 Micro, Inc.: Unknown device 7130 (rev 01) 02:05.4 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7 (rev 02) 02:09.0 Network controller: RaLink: Unknown device 0302 Vigor14:~ #
I'd rather use "iwconfig" to see if the device is up and running.
Vigor14:~ # iwconfig lo no wireless extensions. sit0 no wireless extensions. eth0 no wireless extensions. The w-lan-device doesn't run. There is a switch in the keyboard for the w-lan and in windows I can switch it on and off. But running linux, the switch has no effekt. The reaction after lapci and iwconfig is always the same. No chance? Wolfgang -- Wolfgang Spaniol, Geisenheim Deutschland w.spaniol@gmx.net
On Thursday 02 March 2006 20:29, Wolfgang Spaniol wrote:
The w-lan-device doesn't run. There is a switch in the keyboard for the w-lan and in windows I can switch it on and off. But running linux, the switch has no effekt. The reaction after lapci and iwconfig is always the same.
No chance?
Wolfgang
Hello Wolfgang, On my laptop I have also a switch in the keyboard that is used under w_xp, but under suse linux there is no need to use it for my laptop Medion MD41300. In my laptop I have a wireless card that was also not regcognised by suse 10.0 but in yast you can also search for the wireless card and for that you need also the output from the command hwinfo entered as root user. Did the Yast system found a wireless card on your system or have you entered one. Can you describe how the laptop is connected wireless and also wired. Is there a router /access point involved. Do you have a local network. The following links were for me very clear: http://en.opensuse.org/SDB:Wireless_LANs_with_SuSE_Linux http://en.opensuse.org/SDB:Using_an_ADSL_Router_in_SUSE_LINUX http://en.opensuse.org/SDB:Collecting_Information_on_the_Network_Configurati... http://en.opensuse.org/SDB:Ndiswrappern (use only as last possibility) You know that you never can have 2 active nic's -- Regards, Frans Leerink
Hello, I have also a Medion Notebook and it seems that you have the same funktion-button for the WLAN. First you have to download the modul acerhk from: http://sourceforge.net/project/showfiles.php?group_id=129066 Install it and then open a Console. ~# modprobe acerhk The following should turn on the led for your WLAN ~# echo on > /proc/driver/acerhk/wirelessled Now you can make your WLAN-Settings. It can be (for my Medion 40100) that you need to install the firmware too. Good Luck On Thursday 02 March 2006 20:29, Wolfgang Spaniol wrote:
The w-lan-device doesn't run. There is a switch in the keyboard for the w-lan and in windows I can switch it on and off. But running linux, the switch has no effekt. The reaction after lapci and iwconfig is always the same.
No chance?
Wolfgang
Hello Wolfgang, On my laptop I have also a switch in the keyboard that is used under w_xp, but under suse linux there is no need to use it for my laptop Medion MD41300. In my laptop I have a wireless card that was also not regcognised by suse 10.0 but in yast you can also search for the wireless card and for that you need also the output from the command hwinfo entered as root user. Did the Yast system found a wireless card on your system or have you entered one. Can you describe how the laptop is connected wireless and also wired. Is there a router /access point involved. Do you have a local network. The following links were for me very clear: http://en.opensuse.org/SDB:Wireless_LANs_with_SuSE_Linux http://en.opensuse.org/SDB:Using_an_ADSL_Router_in_SUSE_LINUX http://en.opensuse.org/SDB:Collecting_Information_on_the_Network_Configurati on http://en.opensuse.org/SDB:Ndiswrappern (use only as last possibility) You know that you never can have 2 active nic's -- Regards, Frans Leerink -- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-laptop-unsubscribe@suse.com Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-laptop-help@suse.com
Hello, Am Freitag, 3. März 2006 01:54 schrieb Frans Leerink:
You know that you never can have 2 active nic's
That's wrong - you _can_ have several active network interfaces. For example, I use WLAN for internet access and forward the connection to another machine using the wired network. Works without problems. There are some limitations of course: - obviously, you can only have one default route - the interfaces need to be in different subnets (otherwise, it becomes _really_ tricky ;-) - you may want to set DHCLIENT_PRIMARY_DEVICE in /etc/sysconfig/network/<device> Gruß Christian Boltz -- Ich komm' mir fast vor wie in nem Kochrezept... "lassen sie Ihr Hirn nun bei mindestens 40°C fuer > 12h im eigenen Saft koecheln..." [David Haller in suse-linux-faq]
participants (5)
-
Christian Boltz -
Frans Leerink -
Manfred Theuermann -
Teemu Nikkilä -
Wolfgang Spaniol